|
|
Datasheet WAS4735Q Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | WAS4735Q | 4:1 High speed Switch WAS4735Q
WAS4735Q
4:1 High speed (-3dB bandwidth 1.2GHz) Switch
Http//:www.sh-willsemi.com
Descriptions
The WAS4735Q is a bi-directional, low power, high-speed 4:1 switch that operates from a single +2.3V to +5.5V power supply.
The WAS4735Q is designed for switching of high-speed (-3dB bandwid | WillSEMI | data |
WAS Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | WAS3157B | SPDT Analog Switch WAS3157B
5.5Ω, 400MHz Bandwidth, SPDT Analog Switch
WAS3157B
Http//:www.sh-willsemi.com
Descriptions
The WAS3157B is a high performance, single pole double throw (SPDT) CMOS analog switch for bus switching or audio switching applications. It features high bandwidth up to 400MHz at -3dB and low WillSEMI data | | |
2 | WAS4644C | High Speed Switch WAS4644C
MIPI D-PHY 1.5Gbps, 5-Channel Differential, 2:1/1:2 High Speed Switch
Descriptions
The WAS4644C is a 5-Channel differential, 2:1/1:2 high speed switch suited for MIPI D-PHY full channel (4-Lane and 1-Clock) application. The device provides switching on differential channels between Port A WillSEMI data | | |
3 | WAS4717Q | Dual SPDT Analog Switch WAS4717Q
660MHz Bandwidth, 3Ω Dual SPDT Analog Switch
WAS4717Q
Http//:www.sh-willsemi.com
Descriptions
The WAS4717Q is a high performance, dual Single Pole Double Throw (SPDT) analog switch that features low Ron of 3Ω (typical) at 4.5V VCC. The WAS4717Q operates over a wide VCC range of 2.3V t WillSEMI data | | |
4 | WAS4723Q | SPDT Analog Switch WAS4723Q
WAS4723Q
Low On Resistance, Dual SPDT Analog Switch
Http//:www.willsemi.com
Descriptions
The WAS4723Q is a high performance, dual Single Pole Double Throw (SPDT) analog switch that features ultra-low Ron of 0.5 Ω (typical) at 3.0V VCC. The WAS4723Q operates over a wide VCC range of 2. WillSEMI data | | |
5 | WAS4728Q | Low On Resistance Dual SPDT Analog Switch WAS4728Q
WAS4728Q
Low On Resistance Dual SPDT Analog Switch
Http//:www.willsemi.com
Descriptions
The WAS4728Q is a high performance, dual Single Pole Double Throw (SPDT) analog switch that features ultra-low Ron of 0.5 Ω (typical) at 3.0V VCC. The WAS4728Q operates over a wide VCC range of 2.3 WillSEMI data | | |
6 | WAS4729QB | Dual SPDT Analog Switch WAS4729QB
Low On Resistance (0.75Ω) Dual SPDT Analog Switch with Negative Swing Audio Capability
WAS4729QB
Http//:www.sh-willsemi.com
Descriptions
The WAS4729QB is a high performance, dual
Single Pole Double Throw (SPDT) analog switch with
negative swing audio capability that features ultra-l WillSEMI data | | |
7 | WAS4731Q | 3:1 High speed Switch WAS4731Q
WAS4731Q
3:1 High speed (-3dB bandwidth 1.8GHz) Switch with Mobile High-Definition Link (MHL)
Http//:www.sh-willsemi.com
Descriptions
The WAS4731Q is a bi-directional, low power, high-speed 3:1 switch that operates from a single +2.3V to +5.5V power supply.
The WAS4731Q is designed for WillSEMI data | |
Esta página es del resultado de búsqueda del WAS4735Q. Si pulsa el resultado de búsqueda de WAS4735Q se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |