Datasheet ELCM-1 Equivalent ( PDF )

N.º	Número de pieza	Descripción	Fabricantes	Category
1	ELCM-1	E-Series Surface Mount Mixer 0.5 - 500 MHz E-Series Surface Mount Mixer — 0.5 - 500 MHz ELCM-1 ELCM-1 E-Series Surface Mount Mixer 0.5 – 500 MHz Features • • • • LO Power +7 dBm Up to +1 dBm RF Surface Mount Low Profile SM-89 Package Note: Non Hermetic Package Description M/A-COM’s ELCM-1 is a Low Cost, Broadband, high per	Tyco Electronics	data
2	ELCM-11F	E-Series Surface Mount Mixer 350 - 2000 MHz E-Series Surface Mount Mixer — 350 - 2000 MHz ELCM-11F ELCM-11F E-Series Surface Mount Mixer 350 – 2000 MHz Features • • • LO Power +7 dBm Up to +1 dBm RF Surface Mount SM-87 Package Note: Non Hermetic Package Description M/A-COM’s ELCM-11F is a Low Cost, Broadband, high performance	Tyco Electronics	data
3	ELCM-11X	E-Series Surface Mount Mixer 5-1900 MHz E-Series Surface Mount Mixer — 5 - 1900 MHz ELCM-11X ELCM-11X E-Series Surface Mount Mixer 5 – 1900 MHz Features • • • LO Power +7 dBm Up to +1 dBm RF Surface Mount SM-87 Package Description M/A-COM’s ELCM-11X is a Low Cost, Broadband, high performance Double Balanced Mixer designed	Tyco Electronics	data
4	ELCM-1H	E-Series Surface Mount Mixer 0.5 - 500 MHz E-Series Surface Mount Mixer — 0.5 - 500 MHz ELCM-1H ELCM-1H E-Series Surface Mount Mixer 0.5 – 500 MHz Features • • • LO Power +17 dBm Up to +14 dBm RF Surface Mount SM-87 Package Note: Non Hermetic Package Description M/A-COM’s ELCM-1H is a Low Cost, Broadband, high performance Do	Tyco Electronics	data
5	ELCM-1MH	E-Series Surface Mount Mixer 2 - 500 MHz E-Series Surface Mount Mixer — 2 - 500 MHz ELCM-1MH ELCM-1MH E-Series Surface Mount Mixer 2 – 500 MHz Features • • • • LO Power +13 dBm Up to +9 dBm RF Surface Mount Low Profile SM-89 Package Note: Non Hermetic Package Description M/A-COM’s ELCM-1MH is a Low Cost,Broadband,high Pe	Tyco Electronics	data

ELC Datasheet ( Hoja de datos ) - resultados coincidentes

N.º	Número de pieza	Descripción	Fabricantes	Catagory
1	ELC-10JT	THERMOCOUPLE TRANSMITTER Enlaircon Pty Ltd “Technology to Support the Spirit” ELC-10JT Specifications subject to change without notice 1 Enlaircon Pty Ltd Website: www.enlaircon.com.au Email: [email protected] Phone: (612) 9909 0353 Facsimile: (612) 9909 0823 Postal Address: PO Box 697 Spit	Enlaircon	data
2	ELC-10PR	HIGH-DENSITY SIGNAL CONDITIONERS 10-PACK PULSE SCALER Enlaircon Pty Ltd “Technology to Support the Spirit” ELC-10PR Specifications subject to change without notice 1 Enlaircon Pty Ltd Website: www.enlaircon.com.au Email: [email protected] Phone: (612) 9909 0353 Facsimile: (612) 9909 0823 Postal Address: PO Box 697 Spit	Enlaircon	data
3	ELC-410-37	LED - Chip LED - Chip Preliminary Radiation Violet Type Standard 10.04.2007 Technology InGaN/Al2O3 ELС-410-37 rev. 02/07 Electrodes Both on top side 380 µm typ. dimensions in µm (±20 µm) Ø 90µm 380 µm 350 µm 100 µm P typ. thickness 90 (±20) µm cathode gold alloy, 1.5 µm a	EPIGAP optoelectronic GmbH	data
4	ELC-420-21	LED - Chip LED - Chip 10.04.2008 Radiation Violet Type Special Technology InGaN ELС-420-21 rev. 01 Electrodes N (cathode) up typ. dimensions (±50) µm typ. thickness 145 (±15) µm cathode gold alloy, 2.5 µm anode gold alloy, 1.5 µm Absolute Maximum Ratings at Tamb = 25° C, unless	EPIGAP optoelectronic GmbH	data
5	ELC-460-31-2	LED - Chip LED - Chip 26.05.2008 Radiation Blue Type Technology InGaN/Al2O3 ELС-460-31-2 rev. 02 Electrodes Both on top side typ. dimensions (µm) typ. thickness 100 (±10) µm p and n contact gold alloy backside metalization gold alloy Optical and Electrical Characteristics Tamb = 25�	EPIGAP optoelectronic GmbH	data
6	ELC-460-34	LED - Chip Preliminary LED - Chip Radiation Blue Type Standard 10.04.2007 Technology InGaN/Al2O3 rev. 01/07 Electrodes Both on top side ELС-460-34 300 Ø 80 typ. dimensions in µm (±20 µm) typ. thickness 90 (±20) µm P 300 front side metalization Au-alloy, 0.5 µm backside meta	EPIGAP optoelectronic GmbH	data
7	ELC-470-31-1	LED - Chip LED - Chip Preliminary Radiation Blue Type Standard 10.04.2007 Technology InGaN/Al2O3 ELС-470-31-1 rev. 02/07 Electrodes Both on top side 1000 typ. dimensions (±25) µm P typ. thickness 90 (±10) µm contact metalization gold alloy, 1.5 µm backside metalization N N P	EPIGAP optoelectronic GmbH	data

Esta página es del resultado de búsqueda del ELCM-1. Si pulsa el resultado de búsqueda de ELCM-1 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.

nuevas actualizaciones

Número de pieza	Descripción	Fabricantes	PDF
SPS122	Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.	Sanken	PDF

DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap