DataSheet.jp

SFH6138 の電気的特性と機能

SFH6138のメーカーはVishay Siliconixです、この部品の機能は「(SFH6138 / SFH6139) High Speed Optocoupler / 100 kBd / Low Input Current / High Gain」です。


製品の詳細 ( Datasheet PDF )

部品番号
SFH6138
部品説明
(SFH6138 / SFH6139) High Speed Optocoupler / 100 kBd / Low Input Current / High Gain
メーカ
Vishay Siliconix
ロゴ

Vishay Siliconix ロゴ 




このページの下部にプレビューとSFH6138ダウンロード(pdfファイル)リンクがあります。


Total 6 pages
scroll

No Preview Available !

SFH6138 Datasheet, SFH6138 PDF,ピン配置, 機能
SFH6138/ SFH6139
Vishay Semiconductors
High Speed Optocoupler, 100 kBd, Low Input Current, High Gain
Features
• High Current Transfer Ratio, 800 %
• Low Input Current Requirement, 0.5 mA
• High Output Current, 60 mA
• Isolation Test Voltage, 5300 VRMS
• TTL Compatible Output, 0.1 V VOL
• High Common Mode Rejection, 500 V/µs
• DC to 0.1 Megabit/Sec. Operation
• Adjustable Bandwidth-Access to Base
• Standard Molded Dip Plastic Package
• Lead-free component
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
Agency Approvals
• UL1577, File No. E52744 System Code H or J,
Double Protection
• DIN EN 60747-5-2 (VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
Applications
Logic Ground Isolation-TTL/TTL, TTL/CMOS, CMOS/
CMOS, CMOS/TTL
EIA RS 232C Line Receiver
Low Input Current Line Receiver-Long Lines, Party
Lines
Telephone Ring Detector
117 VAC Line Voltage Status Indication-Low Input
Power Dissipation
Low Power Systems-Ground Isolation
Description
High common mode transient immunity and very high
current ratio together with 5300 VRMS insulation are
achieved by coupling an LED with an integrated high
NC 1
A2
C3
NC 4
8 VCC
7 VB
6 V0
5 GND
e3 Pb
i179082
Pb-free
gain photon detector in an eight pin dual-in-line pack-
age. Separate pins for the photo diode and output
stage enable TTL compatible saturation voltages with
high speed operation.
Photodarlington operation is achieved by tying the
VCC and VO terminals together. Access to the base
terminal allows adjustment to the gain bandwidth.
The SFH6138 is ideal for TTL applications since the
300 % minimum current transfer ratio with an LED
current of 1.6 mA enables operation with one unit
load-in and one unit load-out with a 2.2 kpull-up
resistor.
The SFH6139 is best suited for low power logic appli-
cations involving CMOS and low power TTL. A 400 %
current transfer ratio with only 0.5 mA of LED current
is guaranteed from 0 °C to 70 °C.
Order Information
SFH6138
SFH6139
Part
Remarks
CTR 300 %, DIP-8
CTR 400 %, DIP-8
For additional information on the available options refer to
Option Information.
Document Number 83669
Rev. 1.5, 26-Oct-04
www.vishay.com
1

1 Page





SFH6138 pdf, ピン配列
SFH6138/ SFH6139
Vishay Semiconductors
Electrical Characteristics
Tamb = 25 °C, unless otherwise specified
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
Input
Parameter
Input forward voltage
Input reverse breakdown
voltage
Temperature coefficient of
forward voltage
Test condition
IF = 1.6 mA
IR = 10 µA
IF = 1.6 mA
Symbol
VF
BVR
Min
5.0
Typ.
1.4
- 1.8
Max Unit
1.7 V
V
mV/°C
Output
Parameter
Logic low-output voltage 2)
Logic low-output voltage
Logic high-output current 2)
Logic low supply current 2)
Logic high supply current
2) Pin 7 open.
Test condition
IF = 1.6 mA, IO = 4.8 mA,
VCC = 4.5 V
IF = 1.6 mA, IO = 8.0 mA,
VCC = 4.5 V
IF = 5.0 mA, IO = 15 mA,
VCC = 4.5 V
IF = 12 mA, IO = 24 mA,
VCC = 4.5 V
IF = 0 mA, VO = VCC = 7.0 V
IF = 0 mA, VO = VCC = 18 V
IF = 1.6 mA, VO = OPEN,
VCC = 18 V
IF = 0 mA, VO = OPEN,
VCC = 18 V
Part Symbol
SFH6138 VOL
SFH6139 VOL
SFH6139 VOL
SFH6139 VOL
SFH6138
SFH6139
IOH
IOH
ICCL
ICCH
Min
Typ.
0.1
0.1
0.15
0.25
0.1
0.05
0.2
0.001
Max
0.4
0.4
0.4
0.4
250
100
1.5
10
Unit
V
V
V
V
µA
µA
mA
µA
Coupler
Parameter
Test condition
Symbol
Min
Typ.
Max
Input capacitance
f = 1.0 MHz, VF = 0
CIN
25
Capacitance (input-output) 3) f = 1.0 MHz
CO 0.6
3) Device considered a two-terminal device: pins 1, 2, 3 and 4 shorted together and pins 5, 6, 7, and 8 shorted together.
Unit
pF
pF
Current Transfer Ratio
Parameter
Test condition
Part Symbol Min Typ. Max Unit
Current Transfer Ratio 1,2)
IF = 1.6 mA, VO = 0.4 V,
VCC = 4.5 V
SFH6138 CTR 300 1600
%
IF = 0.5 mA, VO = 0.4 V,
VCC = 4.5 V
SFH6139 CTR 400 1600
%
Current Transfer Ratio
IF = 1.6 mA, VO = 0.4 V,
VCC = 4.5 V
SFH6139 CTR 500 2000
%
1) DC current transfer ratio is defined as the ratio of output collector current, IO, to the forward LED input current, IF times 100 %
2) Pin 7 open.
Document Number 83669
Rev. 1.5, 26-Oct-04
www.vishay.com
3


3Pages


SFH6138 電子部品, 半導体
SFH6138/ SFH6139
Vishay Semiconductors
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and
operatingsystems with respect to their impact on the health and safety of our employees and the public, as
well as their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are
known as ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs
and forbid their use within the next ten years. Various national and international initiatives are pressing for an
earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use
of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments
respectively
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each
customer application by the customer. Should the buyer use Vishay Semiconductors products for any
unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all
claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal
damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423
www.vishay.com
6
Document Number 83669
Rev. 1.5, 26-Oct-04

6 Page

合計 : 6 ページ
PDF ダウンロード

[ SFH6138 データシート.PDF ]

データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。

scroll


部品番号部品説明メーカ
SFH6135

HIGH-SPEED 5.3 kV TRIOS OPTOCOUPLER

Vishay Siliconix
Vishay Siliconix
SFH6135

High Speed Optocoupler / 1 MBd / Transistor Output

Vishay Siliconix
Vishay Siliconix
SFH6136

High Speed Optocoupler / 1 MBd / Transistor Output

Vishay Siliconix
Vishay Siliconix
SFH6138

(SFH6138 / SFH6139) High Speed Optocoupler / 100 kBd / Low Input Current / High Gain

Vishay Siliconix
Vishay Siliconix

www.DataSheet.jp     

|     2020   |  メール    |

    最新        |     Sitemap