|
|
Datasheet W25X10A Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | W25X10A | FLASH MEMORY
W25X10A, W25X20A, W25X40A, W25X80A
1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI
-1-
Publication Release Date: February 27, 2008 Revision B
W25X10A, W25X20A, W25X40A, W25X80A
Table of Contents
1. 2. 3. 4. 5. |  Winbond | data |
| 2 | W25X10AL | 2.5V SERIAL FLASH MEMORY W25X10AL, W25X20AL, W25X40AL, W25X80AL
1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT 2.5V SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI
-1-
Publication Release Date: May 9, 2008 Revision B
Free Datasheet http://www.Datasheet-PDF.com/
W25X10AL, W25X20AL, W25X40AL, W25X80AL
Table of Contents
1. 2 | Winbond | data |
W25 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | W2512 | Precision Thin Film Chip Resistors Precision Thin Film Chip Resistors
PFC Series • Standard 60/40 Sn/Pb and Pb-free (RoHS compliant) terminations available • Available in 0402, 0603, 0805, 1206, 1505, 2010 and 2512 chip sizes • Tested for COTS applications • Absolute TCR to ±10ppm/°C • MIL screening available
IRC Advance  TT electronics data | | |
| 2 | W255 | 200-MHz 24-Output Buffer W255
200-MHz 24-Output Buffer for 4 DDR or 3 SDRAM DIMMS
Features
Functional Description
• One input to 24-output buffer/driver • Supports up to 4 DDR DIMMs or 3 SDRAM DIMMS • One additional output for feedback • SMBus interface for individual output control • Low skew outputs (< 100 p  Cypress Semiconductor buffer | | |
| 3 | W256 | 12 Output Buffer for 2 DDR and 3 SRAM DIMMS W256
12 Output Buffer for 2 DDR and 3 SRAM DIMMS
Features
• One input to 12 output buffer/drivers • Supports up to 2 DDR DIMMs or 3 SDRAM DIMMS • One additional output for feedback • SMBus interface for individual output control • Low skew outputs (< 100 ps) • Supports 266 MHz and 333 M Cypress Semiconductor buffer | | |
| 4 | W25B40 | 4M-BIT SERIAL FLASH MEMORY
W25B40/W25B40A
4M-BIT SERIAL FLASH MEMORY WITH BOOT AND PARAMETER SECTORS
Formally NexFlash NX25B40
The Winbond W25B40 / W25B40A is fully compatible with the previous NexFlash NX25B40 Serial Flash memory.
-1-
Publication Release Date: January 6, 2006 Revision M
W25B40/W25B4 Winbond data | | |
| 5 | W25B40A | 4M-BIT SERIAL FLASH MEMORY
W25B40/W25B40A
4M-BIT SERIAL FLASH MEMORY WITH BOOT AND PARAMETER SECTORS
Formally NexFlash NX25B40
The Winbond W25B40 / W25B40A is fully compatible with the previous NexFlash NX25B40 Serial Flash memory.
-1-
Publication Release Date: January 6, 2006 Revision M
W25B40/W25B4 Winbond data | | |
| 6 | W25D10 | SERIAL FLASH MEMORY W25D10, W25D20, W25D40, W25D80 1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI
Publication Release Date: July 15, 2006 - 1 - Preliminary - Revision A
W25D10, W25D20, W25D40, W25D80
Table of Contents-
1. GENERAL DESCRIPTION ............................... Winbond data | | |
| 7 | W25D20 | SERIAL FLASH MEMORY W25D10, W25D20, W25D40, W25D80 1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI
Publication Release Date: July 15, 2006 - 1 - Preliminary - Revision A
W25D10, W25D20, W25D40, W25D80
Table of Contents-
1. GENERAL DESCRIPTION ............................... Winbond data | |
| Esta página es del resultado de búsqueda del W25X10A. Si pulsa el resultado de búsqueda de W25X10A se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |