DataSheet.es    



Datasheet STK672-400 Equivalent ( PDF )

N.º Número de pieza Descripción Fabricantes PDF
1 STK672-400   2-phase Stepping Motor Driver

Ordering number : ENA0751 STK672-400 Thick-Film Hybrid IC 2-phase Stepping Motor Driver http://onsemi.com Overview The STK672-400 is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control. Applications • Office photocopiers, printers, etc. Features • Entry o
ON Semiconductor
ON Semiconductor
datasheet STK672-400 pdf

STK672- Datasheet ( Hoja de datos ) - resultados coincidentes

Número de pieza Descripción Fabricantes PDF
STK672-330

Two-Phase Stepping Motor Driver

Ordering number : ENN7304 Thick-Film Hybrid IC STK672-330 Unipolar Fixed-Current Chopper (External-Excited PWM) Scheme and Built-in Phase Signal Distribution IC Two-Phase Stepping Motor Driver (Square Wave Drive) Output Current: 1.8 A Overview The STK672-
Sanyo Semicon Device
Sanyo Semicon Device
datasheet pdf - Sanyo Semicon Device
STK672-600

2-phase Stepping Motor Driver

Ordering number : ENA0755A STK672-600 Thick-Film Hybrid IC 2-phase Stepping Motor Driver http://onsemi.com Overview The STK672-600 is a hybrid IC for use as a unipolar, 2-phase stepping motor driver with PWM current control. Applications • Office photocopiers, printers, etc.
ON Semiconductor
ON Semiconductor
datasheet pdf - ON Semiconductor
STK672-050-E

Stepping Motor Driver

Datasheet.es Ordering number : EN5228D Thick-Film Hybrid IC STK672-050-E Overview Unipolar Constant-current Chopper (external excitation PWM) Circuit with Built-in Microstepping Controller Stepping Motor Driver (sine wave drive) Output Current 3.0A (no heat sink*) Th
Sanyo Semicon Device
Sanyo Semicon Device
datasheet pdf - Sanyo Semicon Device


Esta página es del resultado de búsqueda del STK672-400. Si pulsa el resultado de búsqueda de STK672-400 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.


Enlace url :
[1] 

nuevas actualizaciones

Número de pieza Descripción Fabricantes PDF
SPS122

Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.

Sanken
Sanken
PDF


DataSheet.es    |   2020    |  Privacy Policy  |  Contacto  |  Sitemap