|
|
Datasheet SRF05 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | SRF05 | Ultra Sonic Ranger SRF05 Technical Documentation
Page 1 of 4
SRF05 - Ultra-Sonic Ranger
Technical Specification
Introduction The SRF05 is an evolutionary step from the SRF04, and has been designed to increase flexibility, increase range, and to reduce costs still further. As such, the SRF05 is f | ETC | data |
SRF Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | SRF-1016 | Silicon Germanium IF Receiver Preliminary Data Sheet
Product Description
The Sirenza Microdevices’ SRF-1016 is a quadrature demodulator RFIC designed for UHF and microwave receiver IF applications. This device features switchable gain control, high P1dB, and excellent I/Q amplitude and phase balance. Use of this highly integr Sirenza Microdevices receiver | | |
2 | SRF-1016Z | Silicon Germanium IF Receiver Preliminary Data Sheet
Product Description
The Sirenza Microdevices’ SRF-1016 is a quadrature demodulator RFIC designed for UHF and microwave receiver IF applications. This device features switchable gain control, high P1dB, and excellent I/Q amplitude and phase balance. Use of this highly integr Sirenza Microdevices receiver | | |
3 | SRF-2016 | Silicon Germanium IF Receiver Product Description
The Sirenza Microdevices’ SRF-2016 is a quadrature demodulator RFIC designed for UHF and microwave receiver IF applications. This device features switchable gain control, high P1dB, and excellent I/Q amplitude and phase balance. Use of this highly integrated device can result i Sirenza Microdevices receiver | | |
4 | SRF-2016Z | Silicon Germanium IF Receiver Product Description
The Sirenza Microdevices’ SRF-2016 is a quadrature demodulator RFIC designed for UHF and microwave receiver IF applications. This device features switchable gain control, high P1dB, and excellent I/Q amplitude and phase balance. Use of this highly integrated device can result i Sirenza Microdevices receiver | | |
5 | SRF01 | Ultrasonic range finder SRF01 Ultrasonic range finder
Technical Documentation
Overview The SRF01 is a single transducer ultrasonic rangefinder in a very small footprint PCB. Connection is to a single pin Serial interface. The serial interface is a standard TTL level UART format of 1 start, 1 stop and no parity bits, and m ETC data | | |
6 | SRF02 | Ultrasonic Range Finder SRF02 Ultrasonic range finder
Technical Specification
Overview The SRF02 is a single transducer ultrasonic rangefinder in a small footprint PCB. It features both I2C and a Serial interfaces. The serial interface is a standard TTL level UART format at 9600 baud,1 start, 2 stop a ETC data | | |
7 | SRF02 | Ultrasonic Range Finder Tech SRF02 Ultra sonic range finder
http://www.robotelectronics.co.uk/htm/srf02techI2C.htm
SRF02 Ultr asonic r ange finder
Technical Specification
I2C Mode
For Serial mode click here I2C Communication To use the SRF02 in I2C mode, make sure nothing is connecte ETC data | |
Esta página es del resultado de búsqueda del SRF05. Si pulsa el resultado de búsqueda de SRF05 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |