|
|
Datasheet RMPA2265 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | RMPA2265 | Dual Band WCDMA Power Amplifier Module 1850 to 1910 MHz and 1920 to 1980 MHz RMPA2265
December 2004
RMPA2265
Dual Band WCDMA Power Amplifier Module 1850 to 1910 MHz and 1920 to 1980 MHz
General Description
The RMPA2265 power amplifier module (PAM) is designed for WCDMA applications in both the 1850–1910 and 1920– 1980 MHz bands. The 2 stage PAM is internally matched to | Fairchild Semiconductor | amplifier |
RMP Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | RMPA0913C-58 | 3.5V AMPS/CDMA Power Amplifier RMPA0913C-58
3.5V AMPS/CDMA Power Amplifier
PRODUCT INFORMATION
Description
The RMPA0913C-58 is a monolithic high efficiency power amplifier for AMPS/CDMA dual mode applications in the 824 to 849 MHz frequency band. Performance parameters may be slightly adjusted by “tweaking” off-chip matchin ETC amplifier | | |
2 | RMPA0951AT | 3V Cellular CDMA PowerEdge Power Amplifier Module
RMPA0951AT
September 2004
RMPA0951AT
3V Cellular CDMA PowerEdge™ Power Amplifier Module
General Description
The RMPA0951AT is a dual mode, small-outline Power Amplifier Module (PAM) for Cellular CDMA personal communication system applications. The PA is internallymatched to Fairchild Semiconductor amplifier | | |
3 | RMPA0959 | CDMA and CDMA2000-1X PowerEdge Power Amplifier Module RMPA0959 CDMA and CDMA2000-1X PowerEdge™ Power Amplifier Module
March 2006
RMPA0959 CDMA and CDMA2000-1X PowerEdge™ Power Amplifier Module
Features
■ Single positive-supply operation with low power and shutdown modes ■ 39% CDMA efficiency at +28dBm average output po Fairchild Semiconductor amplifier | | |
4 | RMPA0963 | Cellular CDMA CDMA2000-1X and WCDMA Power Amplifier Module RMPA0963
PRELIMINARY
April 2005
RMPA0963 i-Lo™ Cellular CDMA, CDMA2000-1X and WCDMA Power Amplifier Module
Features
■ 38% CDMA/WCDMA efficiency at +28 dBm Pout ■ 14% CDMAA/WCDMA efficiency (80 mA total current) at +16 dBm Pout ■ Meets HSDPA performance requirements � Fairchild Semiconductor amplifier | | |
5 | RMPA0965 | CDMA and CDMA2000-1X PowerEdge Power Amplifier Module RMPA0965
September 2004
RMPA0965
CDMA and CDMA2000-1X PowerEdge™ Power Amplifier Module
General Description
The RMPA0965 power amplifier module (PAM) is designed for cellular band AMPS, CDMA and CDMA2000-1X applications. The 2 stage PAM is internally matched to 50Ω to minimize the use of exter Fairchild Semiconductor amplifier | | |
6 | RMPA0966 | Power Amplifier Module RMPA0966 i-Lo™ Cellular CDMA, CDMA2000-1X and WCDMA Power Amplifier Module (Preliminary)
PRELIMINARY
November 2005
RMPA0966 i-Lo™ Cellular CDMA, CDMA2000-1X and WCDMA Power Amplifier Module
Features
■ 42% CDMA/WCDMA efficiency at +28 dBm Pout ■ 21% CDMA/WCDMA efficiency (56 mA total c Fairchild Semiconductor amplifier | | |
7 | RMPA0967 | Power Edg TM Power Amplifier Module RMPA0967 Cellular CDMA, CDMA2000-1X and WCDMA Power Edge™ Power Amplifier Module
March 2006
RMPA0967 Cellular CDMA, CDMA2000-1X and WCDMA Power Edge™ Power Amplifier Module
Features
■ Single positive-supply operation with low power and shutdown modes ■ 39% CDMA/WCDMA efficiency at +28 d Fairchild Semiconductor amplifier | |
Esta página es del resultado de búsqueda del RMPA2265. Si pulsa el resultado de búsqueda de RMPA2265 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |