|
|
Datasheet PVL500NQ Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | PVL500NQ | Photoelectric Sensor PVL Parts Verification Array
Retroreflective Array Sensor Error Proofing and Light-Guided Assembly
• Rugged metal frame with 225 mm (8.9 in) or 500 mm (19.7 in) sensing length; 1.5 m (4.9 ft) sensing range using included retroreflective tape (up to 6 m (20 ft) range when used with multiple BRT-84 |  Banner | sensor |
PVL Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | PVL225N | Photoelectric Sensor PVL Parts Verification Array
Retroreflective Array Sensor Error Proofing and Light-Guided Assembly
• Rugged metal frame with 225 mm (8.9 in) or 500 mm (19.7 in) sensing length; 1.5 m (4.9 ft) sensing range using included retroreflective tape (up to 6 m (20 ft) range when used with multiple BRT-84 Banner sensor | | |
| 2 | PVL225NQ | Photoelectric Sensor PVL Parts Verification Array
Retroreflective Array Sensor Error Proofing and Light-Guided Assembly
• Rugged metal frame with 225 mm (8.9 in) or 500 mm (19.7 in) sensing length; 1.5 m (4.9 ft) sensing range using included retroreflective tape (up to 6 m (20 ft) range when used with multiple BRT-84 Banner sensor | | |
| 3 | PVL225P | photoelectric sensor datasheet pdf - http://www.DataSheet4U.net/
photoelectric sensor Pick to Light receiver PVL225P
s s s s s s s
Scan field: 225 mm 4-beam system Max. distance to reflector 1.5 m Operating voltage: 12…30 VDC Protection class: IP50 Cable, 2 m PNP switching output
Wiring diagram
Type Ident-No. Des  Turck sensor | | |
| 4 | PVL225P | Photoelectric Sensor PVL Parts Verification Array
Retroreflective Array Sensor Error Proofing and Light-Guided Assembly
• Rugged metal frame with 225 mm (8.9 in) or 500 mm (19.7 in) sensing length; 1.5 m (4.9 ft) sensing range using included retroreflective tape (up to 6 m (20 ft) range when used with multiple BRT-84 Banner sensor | | |
| 5 | PVL225PQ | Photoelectric Sensor PVL Parts Verification Array
Retroreflective Array Sensor Error Proofing and Light-Guided Assembly
• Rugged metal frame with 225 mm (8.9 in) or 500 mm (19.7 in) sensing length; 1.5 m (4.9 ft) sensing range using included retroreflective tape (up to 6 m (20 ft) range when used with multiple BRT-84 Banner sensor | | |
| 6 | PVL500N | Photoelectric Sensor PVL Parts Verification Array
Retroreflective Array Sensor Error Proofing and Light-Guided Assembly
• Rugged metal frame with 225 mm (8.9 in) or 500 mm (19.7 in) sensing length; 1.5 m (4.9 ft) sensing range using included retroreflective tape (up to 6 m (20 ft) range when used with multiple BRT-84 Banner sensor | | |
| 7 | PVL500NQ | Photoelectric Sensor PVL Parts Verification Array
Retroreflective Array Sensor Error Proofing and Light-Guided Assembly
• Rugged metal frame with 225 mm (8.9 in) or 500 mm (19.7 in) sensing length; 1.5 m (4.9 ft) sensing range using included retroreflective tape (up to 6 m (20 ft) range when used with multiple BRT-84 Banner sensor | |
| Esta página es del resultado de búsqueda del PVL500NQ. Si pulsa el resultado de búsqueda de PVL500NQ se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |