|
|
Datasheet PHT6N03T Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | PHT6N03T | TrenchMOS transistor Standard level FET Philips Semiconductors
Product specification
TrenchMOS™ transistor Standard level FET
GENERAL DESCRIPTION
N-channel enhancement mode standard level field-effect power transistor in a plastic envelope suitable for surface mounting. Using ’trench’ technology, the device features very low on-st |  NXP Semiconductors | transistor |
PHT Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | PHT | Thin Film Wraparound Chip Resistors www.vishay.com
PHT
Vishay Sfernice
High Stability - High Temperature (230 °C) Thin Film Wraparound Chip Resistors, Sulfur Resistant
INTRODUCTION
For applications such as down hole applications, the need for parts able to withstand very severe conditions (temperature as high as 215 °C powered or  Vishay data | | |
| 2 | PHT-10x-xx-L-x | PRESS FIT .025 SQ POST HEADER F-211-1
PHT–140–01–L–D
(2,54mm) .100" PHT SERIES
PHT–110–04–L–S
PRESS FIT .025" SQ POST HEADER
SPECIFICATIONS
For complete specifications see www.samtec.com?PHT Insulator Material: Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27µm) Ni  Samtec data | | |
| 3 | PHT-11x-xx-L-x | PRESS FIT .025 SQ POST HEADER F-211-1
PHT–140–01–L–D
(2,54mm) .100" PHT SERIES
PHT–110–04–L–S
PRESS FIT .025" SQ POST HEADER
SPECIFICATIONS
For complete specifications see www.samtec.com?PHT Insulator Material: Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27µm) Ni Samtec data | | |
| 4 | PHT-12x-xx-L-x | PRESS FIT .025 SQ POST HEADER F-211-1
PHT–140–01–L–D
(2,54mm) .100" PHT SERIES
PHT–110–04–L–S
PRESS FIT .025" SQ POST HEADER
SPECIFICATIONS
For complete specifications see www.samtec.com?PHT Insulator Material: Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27µm) Ni Samtec data | | |
| 5 | PHT-13x-xx-L-x | PRESS FIT .025 SQ POST HEADER F-211-1
PHT–140–01–L–D
(2,54mm) .100" PHT SERIES
PHT–110–04–L–S
PRESS FIT .025" SQ POST HEADER
SPECIFICATIONS
For complete specifications see www.samtec.com?PHT Insulator Material: Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27µm) Ni Samtec data | | |
| 6 | PHT-14x-xx-L-x | PRESS FIT .025 SQ POST HEADER F-211-1
PHT–140–01–L–D
(2,54mm) .100" PHT SERIES
PHT–110–04–L–S
PRESS FIT .025" SQ POST HEADER
SPECIFICATIONS
For complete specifications see www.samtec.com?PHT Insulator Material: Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27µm) Ni Samtec data | | |
| 7 | PHT-150-xx-L-x | PRESS FIT .025 SQ POST HEADER F-211-1
PHT–140–01–L–D
(2,54mm) .100" PHT SERIES
PHT–110–04–L–S
PRESS FIT .025" SQ POST HEADER
SPECIFICATIONS
For complete specifications see www.samtec.com?PHT Insulator Material: Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27µm) Ni Samtec data | |
| Esta página es del resultado de búsqueda del PHT6N03T. Si pulsa el resultado de búsqueda de PHT6N03T se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |