|
|
Datasheet PHT250N8 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | PHT250N8 | THYRISTOR THYRISTOR
■回路図 CIRCUIT
250A Avg 800 Volts
■外形寸法図 OUTLINE DRAWING
PHT250N8
Dimension:[mm]
■最大定格 Maximum Ratings
項目 Parameter
くり返しピークオフ電圧 Repetitive Peak Off-State Voltage
非くり返しピークオフ電圧 Non | Nihon Inter Electronics | thyristor |
PHT Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | PHT | Thin Film Wraparound Chip Resistors www.vishay.com
PHT
Vishay Sfernice
High Stability - High Temperature (230 °C) Thin Film Wraparound Chip Resistors, Sulfur Resistant
INTRODUCTION
For applications such as down hole applications, the need for parts able to withstand very severe conditions (temperature as high as 215 °C powered or Vishay data | | |
2 | PHT-10x-xx-L-x | PRESS FIT .025 SQ POST HEADER F-211-1
PHT–140–01–L–D
(2,54mm) .100" PHT SERIES
PHT–110–04–L–S
PRESS FIT .025" SQ POST HEADER
SPECIFICATIONS
For complete specifications see www.samtec.com?PHT Insulator Material: Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27µm) Ni Samtec data | | |
3 | PHT-11x-xx-L-x | PRESS FIT .025 SQ POST HEADER F-211-1
PHT–140–01–L–D
(2,54mm) .100" PHT SERIES
PHT–110–04–L–S
PRESS FIT .025" SQ POST HEADER
SPECIFICATIONS
For complete specifications see www.samtec.com?PHT Insulator Material: Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27µm) Ni Samtec data | | |
4 | PHT-12x-xx-L-x | PRESS FIT .025 SQ POST HEADER F-211-1
PHT–140–01–L–D
(2,54mm) .100" PHT SERIES
PHT–110–04–L–S
PRESS FIT .025" SQ POST HEADER
SPECIFICATIONS
For complete specifications see www.samtec.com?PHT Insulator Material: Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27µm) Ni Samtec data | | |
5 | PHT-13x-xx-L-x | PRESS FIT .025 SQ POST HEADER F-211-1
PHT–140–01–L–D
(2,54mm) .100" PHT SERIES
PHT–110–04–L–S
PRESS FIT .025" SQ POST HEADER
SPECIFICATIONS
For complete specifications see www.samtec.com?PHT Insulator Material: Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27µm) Ni Samtec data | | |
6 | PHT-14x-xx-L-x | PRESS FIT .025 SQ POST HEADER F-211-1
PHT–140–01–L–D
(2,54mm) .100" PHT SERIES
PHT–110–04–L–S
PRESS FIT .025" SQ POST HEADER
SPECIFICATIONS
For complete specifications see www.samtec.com?PHT Insulator Material: Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27µm) Ni Samtec data | | |
7 | PHT-150-xx-L-x | PRESS FIT .025 SQ POST HEADER F-211-1
PHT–140–01–L–D
(2,54mm) .100" PHT SERIES
PHT–110–04–L–S
PRESS FIT .025" SQ POST HEADER
SPECIFICATIONS
For complete specifications see www.samtec.com?PHT Insulator Material: Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27µm) Ni Samtec data | |
Esta página es del resultado de búsqueda del PHT250N8. Si pulsa el resultado de búsqueda de PHT250N8 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |