DataSheet.es    


Datasheet NJBK9 Equivalent ( PDF )

N.º Número de pieza Descripción Fabricantes Category
1NJBK9Motor Protection Relay

NJBK9 Motor protection relay 1. General NJBK9 series motor protection relay (hereinafter referred to as “Pro-tecter”) is used for overload protection, locked rotor protection, phase failure protection, three-phase unbalance protection, grounding protection and PTC temperature protection for AC e
CHiNT
CHiNT
relay


NJB Datasheet ( Hoja de datos ) - resultados coincidentes

N.º Número de pieza Descripción Fabricantes Catagory
1NJB1-STime Delay Relay

4. Wiring diagram Relay Protection Relay NJB1-S wiring diagram A1 15 (+) (~) (-) (~) 16 18 A2 5. Overall and mounting dimensions (mm) 22.5max NJB1S 102max NJB1-S Time Delay Relay 1. General NJB1-S Series Monitoring Protection Relay is applicable for controlling circuit @ A.C. 50Hz/ 60Hz, up
CHiNT
CHiNT
relay
2NJB1-XProtection Relay

Relay Protection Relay NJB1-X Relay (Three-Phase Unbalance, Phase Sequence, Phase Failure Protection) 1. General NJB1-X relay (hereinafter called relay) are applied in AC380V~480V control circuits at a frequency of 50Hz/60Hz as protection elements of phase sequence, phase failuire and phase unbalanc
CHiNT
CHiNT
relay
3NJB1-X1Protection Relay

NJB1-X1 Relay (Phase Sequence, Phase Failure Protection) 1. General NJB1-X1 relay (phase sequence, phase failure protection) is used as an phase sequence and phase failure protection device in control circuits with an AC voltage of 200V~500V and a frequency of 50Hz to make and break the circuit. It
CHiNT
CHiNT
relay
4NJB1-YProtection Relay

Relay Protection Relay NJB1-Y Single-Phase Voltage Relay 1. General NJB1-Y single phase voltage relays (hereinafter the relay for short) are applied in AC 220V, 110V, 24V, frequency 50Hz (or 60Hz) and DC 24V control circuits as single phase overvoltage protection or under-voltage protection and indi
CHiNT
CHiNT
relay
5NJB1-YWProtection Relay

NJB1-YW Floatless Relay 1. General NJB1-YW Floatless Relay is applicable for water level automatic control in industrial facilities & equipments, civil water tower, high cistern, underground conservation pool, etc. The control of automaitic water supply or drainage may be achieved by a simgle operat
CHiNT
CHiNT
relay
6NJBK2Motor Protection Relay

Relay Protection Relay NJBK2 Motor Protection Relay 1. General NJBK2 series motor protection relay (hereinafter referred to protector as simply) is applicable for overload, locked-rotor, phase-failure, three phase current unbalance, earthing and PTC temperature protection of AC motor @ A.C.50Hz, les
CHiNT
CHiNT
relay
7NJBK5Motor Controller

Relay Protection Relay NJBK5 Motor Controller 1. General NJBK5 series motor controller (hereinafter referred to as controller) is mainly used in circuits with a frequency of AC 50Hz (or 60Hz), a rated operational voltage of up to 380V and a rated control power of up to 11kW (current up to 22A) to co
CHiNT
CHiNT
controller



Esta página es del resultado de búsqueda del NJBK9. Si pulsa el resultado de búsqueda de NJBK9 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.


nuevas actualizaciones

Número de pieza Descripción Fabricantes PDF
SPS122

Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.

Sanken
Sanken
PDF


DataSheet.es    |   2020    |  Privacy Policy  |  Contacto  |  Sitemap