DataSheet.es    



Datasheet NCV51190 Equivalent ( PDF )

N.º Número de pieza Descripción Fabricantes PDF
1 NCV51190   1.5A DDR Memory Termination Regulator

NCP51190, NCV51190 1.5A DDR Memory Termination Regulator The NCP/NCV51190 is a simple, cost−effective, high−speed linear regulator designed to generate the VTT termination voltage rail for DDR−I, DDR−II and DDR−III memory. The regulator is capable of actively sourcing or sinking up to ±1
 ON Semiconductor
ON Semiconductor		 datasheet NCV51190 pdf

NCV51 Datasheet ( Hoja de datos ) - resultados coincidentes

Número de pieza Descripción Fabricantes PDF
NCV5171

Boost Regulators

NCV5171 1.5 A 280 kHz Boost Regulators The NCV5171 is a 280 kHz switching regulator with a high efficiency, 1.5 A integrated switch. The part operates over a wide input voltage range, from 2.7 V to 30 V. The flexibility of the design allows the chip to operate in most power suppl
 ON Semiconductor
ON Semiconductor		 datasheet pdf - ON Semiconductor
NCV5173

Boost Regulators

NCV5171, NCV5173 1.5 A 280 kHz/560 kHz Boost Regulators The NCV5171/73 products are 280 kHz/560 kHz switching regulators with a high efficiency, 1.5 A integrated switch. The parts operate over a wide input voltage range, from 2.7 V to 30 V. The flexibility of the design allows t
 ON Semiconductor
ON Semiconductor		 datasheet pdf - ON Semiconductor
NCV51200

3 Amp Termination Regulator

NCP51200, NCV51200 3 Amp VTT Termination Regulator DDR1, DDR2, DDR3, LPDDR3, DDR4 The NCP51200 is a source/sink Double Data Rate (DDR) termination regulator specifically designed for low input voltage and low−noise systems where space is a key consideration. The NCP51200 maint
 ON Semiconductor
ON Semiconductor		 datasheet pdf - ON Semiconductor


Esta página es del resultado de búsqueda del NCV51190. Si pulsa el resultado de búsqueda de NCV51190 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.


Enlace url :
[1] 

nuevas actualizaciones

Número de pieza Descripción Fabricantes PDF
SPS122

Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.

 Sanken
Sanken		 PDF


DataSheet.es    |   2020    |  Privacy Policy  |  Contacto  |  Sitemap