DataSheet.es    



Datasheet LTC4267-3 Equivalent ( PDF )

N.º Número de pieza Descripción Fabricantes PDF
1 LTC4267-3   Power over Ethernet IEEE 802.3af PD Interface

FEATURES n n n n n n n n n n n LTC4267-3 Power over Ethernet IEEE 802.3af PD Interface with Integrated Switching Regulator DESCRIPTIO The LTC®4267-3 combines an IEEE 802.3af compliant Powered Device (PD) interface with a 300kHz current mode switching regulator, providing a com
Linear Technology
Linear Technology
datasheet LTC4267-3 pdf

LTC426 Datasheet ( Hoja de datos ) - resultados coincidentes

Número de pieza Descripción Fabricantes PDF
LTC4263-1

High Power Single PSE Controller

LTC4263-1 High Power Single PSE Controller with Internal Switch DESCRIPTION The LTC®4263-1 is a high power, single PSE controller for use in Power over Ethernet systems. The internal current limit and short-circuit protection are designed to provide up to 30
Linear Technology
Linear Technology
datasheet pdf - Linear Technology
LTC4260

Positive High Voltage Hot Swap Controller

Features n Allows Safe Board Insertion into Live Backplane n 8-Bit ADC Monitors Current and Voltage n I2C™/SMBus Interface n Wide Operating Voltage Range: 8.5V to 80V n High Side Drive for External N-Channel MOSFET n Input Overvoltage/Undervoltage Protection n Optional L
Linear Technology
Linear Technology
datasheet pdf - Linear Technology
LTC4267

Power over Ethernet IEEE 802.3af PD Interface

FEATURES ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ LTC4267 Power over Ethernet IEEE 802.3af PD Interface with Integrated Switching Regulator DESCRIPTIO The LTC®4267 combines an IEEE 802.3af compliant Powered Device (PD) interface with a current mode switching
Linear Technology
Linear Technology
datasheet pdf - Linear Technology


Esta página es del resultado de búsqueda del LTC4267-3. Si pulsa el resultado de búsqueda de LTC4267-3 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.


Enlace url :
[1] 

nuevas actualizaciones

Número de pieza Descripción Fabricantes PDF
SPS122

Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.

Sanken
Sanken
PDF


DataSheet.es    |   2020    |  Privacy Policy  |  Contacto  |  Sitemap