|
|
Datasheet LC8905V Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | LC8905V | Digital Audio Interface Receiver Ordering number : EN*5237
CMOS LSI
LC8905V
Digital Audio Interface Receiver
Preliminary Overview
The LC8905V is for use in IEC 958 and EIAJ CP-1201 format data transmission between digital audio equipment. This LSI is used on the receiving side, and handles synchronization with the input signal an | Sanyo | receiver |
LC8 Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | LC8.5 | Diode TVS Single Uni-Dir 8.5V 1.5KW 2-Pin DO-13 New Jersey Semiconductor diode | | |
2 | LC8.5A | Diode TVS Single Uni-Dir 8.5V 1.5KW 2-Pin DO-13 New Jersey Semiconductor diode | | |
3 | LC80 | Zener Diode, Rectifier Microsemi Corporation tvs-diode | | |
4 | LC801 | SILICON GATE ENHANCEMENT MODE RF POWER LDMOS TRANSISTOR polyfet rf devices
LC801
General Description Silicon VDMOS and LDMOS transistors designed specifically for broadband RF applications. Suitable for Militry Radios, Cellular and Paging Amplifier Base Stations, Broadcast FM/AM, MRI, Laser Driver and others. "Polyfet" process features low feedback and o Polyfet RF Devices transistor | | |
5 | LC80101M | VICS LSI Ordering number : EN54384465
CMOS LSI
LC80101M
VICS LSI
Overview
The LC80101M is a special-purpose descrambler LSI for use in VICS systems. FM multiplexed service data that has had VICS center scrambling applied can be descrambled and received by inserting this LSI in the serial interface between Sanyo Semicon Device data | | |
6 | LC80A | Zener Diode, Rectifier Microsemi Corporation tvs-diode | | |
7 | LC80A | Diode TVS Single Uni-Dir 80V 1.5KW 2-Pin DO-13 New Jersey Semiconductor diode | |
Esta página es del resultado de búsqueda del LC8905V. Si pulsa el resultado de búsqueda de LC8905V se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |