|
|
Datasheet HMC442 Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | HMC442 | GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER/ 17.5 - 25.5 GHz v01.0304
MICROWAVE CORPORATION
HMC442
GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 17.5 - 25.5 GHz
Features
Saturated Power: +23 dBm @ 25% PAE Gain: 15 dB Supply Voltage: +5.0 V 50 Ohm Matched Input/Output
1
AMPLIFIERS - CHIP
Typical Applications
The HMC442 is ideal for use as a medium power amplifie |  Hittite Microwave Corporation | amplifier |
| 2 | HMC442LC3B | GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER www.datasheet4u.com
v00.1104
HMC442LC3B
GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 17.5 - 25.5 GHz
5
AMPLIFIERS - SMT
Typical Applications
The HMC442LC3B is an ideal gain block or driver amplifier for: • Point-to-Point Radios • Point-to-Multi-Point Radios • LO Driver for HMC Mixers • Militar | Hittite Microwave Corporation | amplifier |
| 3 | HMC442LM1 | GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER/ 17.5 - 24 GHz v01.1003
MICROWAVE CORPORATION
HMC442LM1
GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 17.5 - 24 GHz
Features
Saturated Power: +23 dBm @ 27% PAE Gain: 14 dB Supply Voltage: +5.0 V 50 Ohm Matched Input/Output
8
AMPLIFIERS - SMT
Typical Applications
The HMC442LM1 is an ideal gain block or driver amp for: | Hittite Microwave Corporation | amplifier |
HMC Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | HMC-ABH209 | GaAs HEMT MMIC MEDIUM POWER AMPLIFIER
v01.1207
HMC-ABH209
GaAs HEMT MMIC MEDIUM POWER AMPLIFIER, 55 - 65 GHz
Typical Applications
This HMC-ABH209 is ideal for: • Short Haul / High Capacity Links
Features
Output IP3: +25 dBm P1dB: +16 dBm Gain: 13 dB Supply Voltage: +5 V 50 Ohm Matched Input/Output
3
LINEAR & PO Hittite Microwave Corporation amplifier | | |
| 2 | HMC-ABH241 | GaAs HEMT MMIC MEDIUM POWER AMPLIFIER
v01.1207
HMC-ABH241
GaAs HEMT MMIC MEDIUM POWER AMPLIFIER, 50 - 66 GHz
Features
Output IP3: +25 dBm P1dB: +17 dBm Gain: 24 dB Supply Voltage: +5 V 50 Ohm Matched Input/Output
Typical Applications
This HMC-ABH241 is ideal for: • Short Haul / High Capacity Links
3
LINEAR & POW Hittite Microwave Corporation amplifier | | |
| 3 | HMC-ABH264 | GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER v01.0209
Typical Applications
The HMC-ABH264 is ideal for: • Point-to-Point Radios
3 • Point-to-Multi-Point Radios • VSAT • Military & Space
HMC-ABH264
GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER, 34 - 42 GHz
Features
High Output IP3: 29 dBm High P1dB: 18 dBm High Gain: 18.5 dB Bias Supply: +5V  Analog Devices amplifier | | |
| 4 | HMC-ALH102 | GaAs HEMT MMIC WIDEBAND LOW NOISE AMPLIFIER
v01.0108
HMC-ALH102
GaAs HEMT MMIC WIDEBAND LOW NOISE AMPLIFIER, 2 - 20 GHz
1
LOW NOISE AMPLIFIERS - CHIP
Typical Applications
This HMC-ALH102 is ideal for: • Wideband Communications Receivers • Surveillance Systems • Point-to-Point Radios • Point-to-Multi-Point Radios Hittite Microwave Corporation amplifier | | |
| 5 | HMC-ALH140 | GaAs HEMT MMIC LOW NOISE AMPLIFIER
v00.0907
HMC-ALH140
GaAs HEMT MMIC LOW NOISE AMPLIFIER, 24 - 40 GHz
Features
Noise Figure: 4 dB Gain: 11.5 dB P1dB Output Power: +15 dBm Supply Voltage: +4V @ 60 mA Die Size: 2.5 x 1.4 x 0.1 mm
Typical Applications
This HMC-ALH140 is ideal for: • Point-to-Point Radios • Poi Hittite Microwave Corporation amplifier | | |
| 6 | HMC-ALH216 | GaAs HEMT MMIC LOW NOISE AMPLIFIER LOW NOISE AMPLIFIERS - CHIP
v03.0209
1 Typical Applications This HMC-ALH216 is ideal for: • Point-to-Point Radios • Point-to-Multi-Point Radios • Military & Space • Test Instrumentation
HMC-ALH216
GaAs HEMT MMIC LOW NOISE AMPLIFIER, 14 - 27 GHz
Features
Noise Figure: 2.5 dB @ 20 GHz Gain: Analog Devices amplifier | | |
| 7 | HMC-ALH244 | GaAs HEMT MMIC LOW NOISE AMPLIFIER
v01.0108
HMC-ALH244
GaAs HEMT MMIC LOW NOISE AMPLIFIER, 24 - 40 GHz
Features
Noise Figure: 3.5 dB Gain: 12 dB
1
LOW NOISE AMPLIFIERS - CHIP
Typical Applications
This HMC-ALH244 is ideal for: • Point-to-Point Radios • Point-to-Multi-Point Radios
P1dB Output Power: +13 dBm Hittite Microwave Corporation amplifier | |
| Esta página es del resultado de búsqueda del HMC442. Si pulsa el resultado de búsqueda de HMC442 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |