|
|
Datasheet EUP3010A Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | EUP3010A | 1A Synchronous Step-Down Converter EUP3010/A
1.5MHz,1A Synchronous Step-Down Converter with Soft Start
DESCRIPTION
The EUP3010/A is a constant frequency, current mode, PWM step-down converter. The device integrates a main switch and a synchronous rectifier for high efficiency. The 2.5V to 5.5V input voltage range makes the EUP3010/A | Eutech Microelectronics | converter |
EUP Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | EUP2410 | 500KHz Synchronous Step-up Converter EUP2410
1.6A, 500KHz Synchronous Step-up Converter
DESCRIPTION
The EUP2410 is a highly efficient, synchronous, fixed frequency, current-mode step-up converter with output to input disconnect. When EUP2410 is disabled, the internal conduction path from SW to OUT is fully blocked and the OUT pin is is Eutech Microelectronics converter | | |
2 | EUP2410OIR1 | 500KHz Synchronous Step-up Converter EUP2410
1.6A, 500KHz Synchronous Step-up Converter
DESCRIPTION
The EUP2410 is a highly efficient, synchronous, fixed frequency, current-mode step-up converter with output to input disconnect. When EUP2410 is disabled, the internal conduction path from SW to OUT is fully blocked and the OUT pin is is Eutech Microelectronics converter | | |
3 | EUP2412 | 500kHz Synchronous Step-Up Converter 500kHz Synchronous Step-Up Converter with 600mA LDO
DESCRIPTION
The EUP2412 provides a high efficiency 500kHz synchronous step-up converter and a low noise, high PSRR, low dropout (LDO) fixed output linear regulator with independent enable pins. EUP2412 input voltage range is 2.2V to 5.5V, making it Eutech Microelectronics converter | | |
4 | EUP2412-12JIR1 | 500kHz Synchronous Step-Up Converter 500kHz Synchronous Step-Up Converter with 600mA LDO
DESCRIPTION
The EUP2412 provides a high efficiency 500kHz synchronous step-up converter and a low noise, high PSRR, low dropout (LDO) fixed output linear regulator with independent enable pins. EUP2412 input voltage range is 2.2V to 5.5V, making it Eutech Microelectronics converter | | |
5 | EUP2412-15JIR1 | 500kHz Synchronous Step-Up Converter 500kHz Synchronous Step-Up Converter with 600mA LDO
DESCRIPTION
The EUP2412 provides a high efficiency 500kHz synchronous step-up converter and a low noise, high PSRR, low dropout (LDO) fixed output linear regulator with independent enable pins. EUP2412 input voltage range is 2.2V to 5.5V, making it Eutech Microelectronics converter | | |
6 | EUP2412-18JIR1 | 500kHz Synchronous Step-Up Converter 500kHz Synchronous Step-Up Converter with 600mA LDO
DESCRIPTION
The EUP2412 provides a high efficiency 500kHz synchronous step-up converter and a low noise, high PSRR, low dropout (LDO) fixed output linear regulator with independent enable pins. EUP2412 input voltage range is 2.2V to 5.5V, making it Eutech Microelectronics converter | | |
7 | EUP2412-25JIR1 | 500kHz Synchronous Step-Up Converter 500kHz Synchronous Step-Up Converter with 600mA LDO
DESCRIPTION
The EUP2412 provides a high efficiency 500kHz synchronous step-up converter and a low noise, high PSRR, low dropout (LDO) fixed output linear regulator with independent enable pins. EUP2412 input voltage range is 2.2V to 5.5V, making it Eutech Microelectronics converter | |
Esta página es del resultado de búsqueda del EUP3010A. Si pulsa el resultado de búsqueda de EUP3010A se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |