|
|
Datasheet ELC18B221L Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | ELC18B221L | Choke Coils Choke Coils
■ Examples Type 06D
Inductance (µH) 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 270.0 330.0 390.0 470.0 560.0 680.0 820.0 1000.0 1200.0 1500.0 1800.0 2200.0 2700.0 3300.0 3900.0 4700.0 5600.0 ±10 10 ±20 To |  Panasonic | data |
ELC Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | ELC-10JT | THERMOCOUPLE TRANSMITTER
Enlaircon Pty Ltd
“Technology to Support the Spirit”
ELC-10JT
Specifications subject to change without notice
1
Enlaircon Pty Ltd
Website: www.enlaircon.com.au Email: [email protected] Phone: (612) 9909 0353 Facsimile: (612) 9909 0823 Postal Address: PO Box 697 Spit  Enlaircon data | | |
| 2 | ELC-10PR | HIGH-DENSITY SIGNAL CONDITIONERS 10-PACK PULSE SCALER
Enlaircon Pty Ltd
“Technology to Support the Spirit”
ELC-10PR
Specifications subject to change without notice
1
Enlaircon Pty Ltd
Website: www.enlaircon.com.au Email: [email protected] Phone: (612) 9909 0353 Facsimile: (612) 9909 0823 Postal Address: PO Box 697 Spit Enlaircon data | | |
| 3 | ELC-410-37 | LED - Chip LED - Chip
Preliminary Radiation Violet Type Standard 10.04.2007 Technology InGaN/Al2O3
ELС-410-37
rev. 02/07 Electrodes Both on top side
380 µm
typ. dimensions in µm (±20 µm)
Ø 90µm 380 µm 350 µm 100 µm
P
typ. thickness 90 (±20) µm cathode gold alloy, 1.5 µm a  EPIGAP optoelectronic GmbH data | | |
| 4 | ELC-420-21 | LED - Chip LED - Chip
10.04.2008 Radiation Violet Type Special Technology InGaN
ELС-420-21
rev. 01 Electrodes N (cathode) up
typ. dimensions (±50) µm
typ. thickness 145 (±15) µm cathode gold alloy, 2.5 µm anode gold alloy, 1.5 µm
Absolute Maximum Ratings
at Tamb = 25° C, unless EPIGAP optoelectronic GmbH data | | |
| 5 | ELC-460-31-2 | LED - Chip LED - Chip
26.05.2008 Radiation Blue Type Technology InGaN/Al2O3
ELС-460-31-2
rev. 02 Electrodes Both on top side
typ. dimensions (µm)
typ. thickness 100 (±10) µm p and n contact gold alloy backside metalization gold alloy
Optical and Electrical Characteristics
Tamb = 25� EPIGAP optoelectronic GmbH data | | |
| 6 | ELC-460-34 | LED - Chip Preliminary
LED - Chip
Radiation Blue Type Standard
10.04.2007 Technology InGaN/Al2O3
rev. 01/07 Electrodes Both on top side
ELС-460-34
300 Ø 80
typ. dimensions in µm (±20 µm)
typ. thickness 90 (±20) µm
P
300
front side metalization Au-alloy, 0.5 µm backside meta EPIGAP optoelectronic GmbH data | | |
| 7 | ELC-470-31-1 | LED - Chip LED - Chip
Preliminary Radiation Blue Type Standard 10.04.2007 Technology InGaN/Al2O3
ELС-470-31-1
rev. 02/07
Electrodes Both on top side
1000
typ. dimensions (±25) µm
P
typ. thickness 90 (±10) µm contact metalization gold alloy, 1.5 µm backside metalization
N
N P
EPIGAP optoelectronic GmbH data | |
| Esta página es del resultado de búsqueda del ELC18B221L. Si pulsa el resultado de búsqueda de ELC18B221L se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |