|
|
Datasheet DS8884A Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | DS8884A | DS8884A High Voltage Cathode Decoder/Driver (Rev. A) |  Texas Instruments | driver |
| 2 | DS8884A | High Voltage Cathode Decoder/Driver DS8884A High Voltage Cathode Decoder Driver
May 1986
DS8884A High Voltage Cathode Decoder Driver
General Description
The DS8884A is designed to decode four lines of BCD input and drive seven-segment digits of gas-filled readout displays All outputs consist of switchable and programmable current si |  National Semiconductor | driver |
| 3 | DS8884AN | High Voltage Cathode Decoder/Driver DS8884A High Voltage Cathode Decoder Driver
May 1986
DS8884A High Voltage Cathode Decoder Driver
General Description
The DS8884A is designed to decode four lines of BCD input and drive seven-segment digits of gas-filled readout displays All outputs consist of switchable and programmable current si | National Semiconductor | driver |
DS8 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | DS8005 | Smart Card Interface 19-5257; Rev 0; 4/10
Smart Card Interface
General Description
The DS8005 dual smart card interface is a low-cost, dual analog front-end for an IC card reader interface that needs to communicate with two smart cards in a mutually exclusive fashion. The analog interface is design  Maxim Integrated Products data | | |
| 2 | DS8007 | multiprotocol dual smart card interface Rev 0; 1/07
Multiprotocol Dual Smart Card Interface
General Description
The DS8007 multiprotocol dual smart card interface is a low-cost, dual smart card reader interface supporting all ISO 7816, EMV, and GSM11-11 requirements. Through its 8-bit parallel bus and dedicated address selects (AD3–AD0 Maxim Integrated Products data | | |
| 3 | DS8007A | Multiprotocol Dual Smart Card Interface Rev 0; 4/08
KIT ATION EVALU E L B A IL AVA
Multiprotocol Dual Smart Card Interface
General Description
The DS8007A multiprotocol dual smart card interface is an automotive grade, low-cost, dual smart card reader interface supporting all ISO 7816, EMV™, and GSM1111 requiremen Maxim Integrated Products data | | |
| 4 | DS8007A | Multiprotocol Dual Smart Card Interface Rev 0; 4/08
KIT ATION EVALU E L B A IL AVA
Multiprotocol Dual Smart Card Interface
General Description
The DS8007A multiprotocol dual smart card interface is an automotive grade, low-cost, dual smart card reader interface supporting all ISO 7816, EMV™, and GSM1111 requiremen Maxim Integrated Products data | | |
| 5 | DS8023 | Smart Card Interface Rev 0; 8/08
Smart Card Interface
General Description
The DS8023 smart card interface IC is a low-cost, lowpower, analog front-end for a smart card reader designed for all ISO 7816, EMV*, and GSM11-11 applications. The DS8023 supports 5V, 3V, and 1.8V smart cards, and provides a Maxim Integrated Products data | | |
| 6 | DS8024 | Smart Card Interface Rev 1; 8/08
Smart Card Interface
General Description
The DS8024 smart card interface IC is a low-cost, analog front-end for a smart card reader, designed for all ISO 7816, EMV*, and GSM11-11 applications. The DS8024 is a pin-for-pin drop-in replacement for the NXP TDA8024 and i Maxim Integrated Products data | | |
| 7 | DS80C310 | High-Speed Micro DS80C310 High-Speed Micro
www.dalsemi.com
FEATURES
80C32-compatible - 8051 pin- and instruction set-compatible - Full duplex serial port - Three 16-bit timer/counters - 256 bytes scratchpad RAM - Multiplexed address/data bus - Addresses 64 kB ROM and 64 kB RAM High-Speed Architecture - 4 clocks/mac  Dallas Semiconducotr data | |
| Esta página es del resultado de búsqueda del DS8884A. Si pulsa el resultado de búsqueda de DS8884A se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |