Datasheet DS83C530 Equivalent ( PDF )

N.º	Número de pieza	Descripción	Fabricantes	Category
1	DS83C530	EPROM MICRO www.dalsemi.com DS87C530/DS83C530 EPROM/ROM Micro with Real Time Clock FEATURES 80C52-compatible - 8051 instruction set-compatible - Four 8-bit I/O ports - Three 16-bit timer/counters - 256 bytes scratchpad RAM Large on-chip memory - 16 kB EPROM (OTP) - 1 kB extra on-chip SRAM for MOVX ROMSIZE Fea	Dallas Semiconducotr	data
2	DS83C530	EPROM/ROM Microcontrollers DS87C530/DS83C530 EPROM/ROM Microcontrollers with Real-Time Clock www.maxim-ic.com FEATURES  80C52 Compatible 8051 Instruction-Set Compatible Four 8-Bit I/O Ports Three 16-Bit Timer/Counters 256 Bytes Scratchpad RAM  Large On-Chip Memory 16kB EPROM (OTP) 1kB Extra On-Chip SRAM for MOVX  R	Maxim Integrated	controller

DS8 Datasheet ( Hoja de datos ) - resultados coincidentes

N.º	Número de pieza	Descripción	Fabricantes	Catagory
1	DS8005	Smart Card Interface 19-5257; Rev 0; 4/10 Smart Card Interface General Description The DS8005 dual smart card interface is a low-cost, dual analog front-end for an IC card reader interface that needs to communicate with two smart cards in a mutually exclusive fashion. The analog interface is design	Maxim Integrated Products	data
2	DS8007	multiprotocol dual smart card interface Rev 0; 1/07 Multiprotocol Dual Smart Card Interface General Description The DS8007 multiprotocol dual smart card interface is a low-cost, dual smart card reader interface supporting all ISO 7816, EMV, and GSM11-11 requirements. Through its 8-bit parallel bus and dedicated address selects (AD3–AD0	Maxim Integrated Products	data
3	DS8007A	Multiprotocol Dual Smart Card Interface Rev 0; 4/08 KIT ATION EVALU E L B A IL AVA Multiprotocol Dual Smart Card Interface General Description The DS8007A multiprotocol dual smart card interface is an automotive grade, low-cost, dual smart card reader interface supporting all ISO 7816, EMV™, and GSM1111 requiremen	Maxim Integrated Products	data
4	DS8007A	Multiprotocol Dual Smart Card Interface Rev 0; 4/08 KIT ATION EVALU E L B A IL AVA Multiprotocol Dual Smart Card Interface General Description The DS8007A multiprotocol dual smart card interface is an automotive grade, low-cost, dual smart card reader interface supporting all ISO 7816, EMV™, and GSM1111 requiremen	Maxim Integrated Products	data
5	DS8023	Smart Card Interface Rev 0; 8/08 Smart Card Interface General Description The DS8023 smart card interface IC is a low-cost, lowpower, analog front-end for a smart card reader designed for all ISO 7816, EMV*, and GSM11-11 applications. The DS8023 supports 5V, 3V, and 1.8V smart cards, and provides a	Maxim Integrated Products	data
6	DS8024	Smart Card Interface Rev 1; 8/08 Smart Card Interface General Description The DS8024 smart card interface IC is a low-cost, analog front-end for a smart card reader, designed for all ISO 7816, EMV*, and GSM11-11 applications. The DS8024 is a pin-for-pin drop-in replacement for the NXP TDA8024 and i	Maxim Integrated Products	data
7	DS80C310	High-Speed Micro DS80C310 High-Speed Micro www.dalsemi.com FEATURES 80C32-compatible - 8051 pin- and instruction set-compatible - Full duplex serial port - Three 16-bit timer/counters - 256 bytes scratchpad RAM - Multiplexed address/data bus - Addresses 64 kB ROM and 64 kB RAM High-Speed Architecture - 4 clocks/mac	Dallas Semiconducotr	data

Esta página es del resultado de búsqueda del DS83C530. Si pulsa el resultado de búsqueda de DS83C530 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.

nuevas actualizaciones

Número de pieza	Descripción	Fabricantes	PDF
SPS122	Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.	Sanken	PDF

DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap