DataSheet.es    



Datasheet AT25F512A Equivalent ( PDF )

N.º Número de pieza Descripción Fabricantes PDF
1 AT25F512A   512Kbit High Speed SPI Serial Flash Memory

Features • Serial Peripheral Interface (SPI) Compatible • Supports SPI Modes 0 (0,0) and 3 (1,1) – Datasheet Describes 0 Operation • 33 MHz Clock Rate • Byte Mode and 128-byte Page Mode for Program Operations • Sector Architecture: – Two Sectors with 32K Bytes Each – 256 Pages per Se
ATMEL Corporation
ATMEL Corporation
datasheet AT25F512A pdf

AT25F5 Datasheet ( Hoja de datos ) - resultados coincidentes

Número de pieza Descripción Fabricantes PDF
AT25F512B

512-Kilobit 2.7-volt Minimum SPI Serial Flash Memory

Features • Single 2.7V - 3.6V Supply • Serial Peripheral Interface (SPI) Compatible – Supports SPI Modes 0 and 3 • 70 MHz Maximum Operating Frequency – Clock-to-Output (tV) of 6 ns Maximum • Flexible, Optimized Erase Architecture for Code + Data
ATMEL Corporation
ATMEL Corporation
datasheet pdf - ATMEL Corporation
AT25F512N-10SI-2.7

SPI Serial Memory

Features • • • • • Serial Peripheral Interface (SPI) Compatible Supports SPI Modes 0 (0,0) and 3 (1,1) 20 MHz Clock Rate Byte Mode and 256-byte Page Mode for Program Operations Sector Architecture: – Two Sectors with 32K Bytes Each (512K) – Four Sectors with 32K Byt
ATMEL Corporation
ATMEL Corporation
datasheet pdf - ATMEL Corporation
AT25F512A

512Kbit High Speed SPI Serial Flash Memory

Features • Serial Peripheral Interface (SPI) Compatible • Supports SPI Modes 0 (0,0) and 3 (1,1) – Datasheet Describes 0 Operation • 33 MHz Clock Rate • Byte Mode and 128-byte Page Mode for Program Operations • Sector Architecture: – Two Sectors with 32K Bytes Each
ATMEL Corporation
ATMEL Corporation
datasheet pdf - ATMEL Corporation


Esta página es del resultado de búsqueda del AT25F512A. Si pulsa el resultado de búsqueda de AT25F512A se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin.


Enlace url :
[1] 

nuevas actualizaciones

Número de pieza Descripción Fabricantes PDF
SPS122

Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use.

Sanken
Sanken
PDF


DataSheet.es    |   2020    |  Privacy Policy  |  Contacto  |  Sitemap