|
|
Datasheet AT25DF081A Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | AT25DF081A | 8-Mbit 2.7V Minimum Serial Peripheral Interface Serial Flash Memory Features
• Single 2.7V - 3.6V Supply • Serial Peripheral Interface (SPI) Compatible
– Supports SPI Modes 0 and 3 – Supports RapidS Operation – Supports Dual-Input Program and Dual-Output Read Very High Operating Frequencies – 100MHz for RapidS – 85MHz for SPI – Clock-to-Output (tV) o |  ATMEL Corporation | data |
| 2 | AT25DF081A | 8-Mbit 2.7V Minimum SPI Serial Flash Memory Features
• Single 2.7V - 3.6V Supply • Serial Peripheral Interface (SPI) Compatible
– Supports SPI Modes 0 and 3 – Supports RapidS™ Operation – Supports Dual-Input Program and Dual-Output Read Very High Operating Frequencies – 100MHz for RapidS – 85MHz for SPI – Clock-to-Output (tV |  Adesto | data |
AT2 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | AT20-0106 | Digital Attenuator/ 50 dB/ 6-Bit/ TTL Driver/ DC - 2 GHz Digital Attenuator, 50 dB, 6-Bit, TTL Driver, DC - 2 GHz
V 5.00
AT20-0106
Features
n Attenuation: 1 dB steps to 50 dB n Temperature Stability: ± 0.18 dB from –40°C to +85°C n n n n n n
CR-13
Typical Low DC Power Consumption Surface Mount Package Integral TTL Driver High Intercept Point Low  Tyco Electronics driver | | |
| 2 | AT20-0106PIN | Digital Attenuator/ 50 dB/ 6-Bit/ TTL Driver/ DC - 2 GHz Digital Attenuator, 50 dB, 6-Bit, TTL Driver, DC - 2 GHz
V 5.00
AT20-0106
Features
n Attenuation: 1 dB steps to 50 dB n Temperature Stability: ± 0.18 dB from –40°C to +85°C n n n n n n
CR-13
Typical Low DC Power Consumption Surface Mount Package Integral TTL Driver High Intercept Point Low Tyco Electronics driver | | |
| 3 | AT20-0107 | Digital Attenuator/ 31.5 dB/ 6-Bit/ TTL Driver/ DC - 2.0 GHz Digital Attenuator, 31.5 dB, 6-Bit, TTL Driver, DC - 2.0 GHz
V 4.00
AT20-0107
Features
n n n n n n n
CR-13
Attenuation: 0.5 dB Steps to 31.5 dB1 Temperature Stability: ±0.18 dB from –40ºC to +85ºC Typ. Low DC Power Consumption Surface Mount Package Integral TTL Driver High Intercept Point Tyco Electronics driver | | |
| 4 | AT20-0107-TB | Digital Attenuator/ 31.5 dB/ 6-Bit/ TTL Driver/ DC - 2.0 GHz Digital Attenuator, 31.5 dB, 6-Bit, TTL Driver, DC - 2.0 GHz
V 4.00
AT20-0107
Features
n n n n n n n
CR-13
Attenuation: 0.5 dB Steps to 31.5 dB1 Temperature Stability: ±0.18 dB from –40ºC to +85ºC Typ. Low DC Power Consumption Surface Mount Package Integral TTL Driver High Intercept Point Tyco Electronics driver | | |
| 5 | AT20-0107TR | Digital Attenuator/ 31.5 dB/ 6-Bit/ TTL Driver/ DC - 2.0 GHz Digital Attenuator, 31.5 dB, 6-Bit, TTL Driver, DC - 2.0 GHz
V 4.00
AT20-0107
Features
n n n n n n n
CR-13
Attenuation: 0.5 dB Steps to 31.5 dB1 Temperature Stability: ±0.18 dB from –40ºC to +85ºC Typ. Low DC Power Consumption Surface Mount Package Integral TTL Driver High Intercept Point Tyco Electronics driver | | |
| 6 | AT20-0263 | Digital Attenuator/ 31 dB/ 5-Bit/ TTL Driver/ DC - 2 GHz Digital Attenuator, 31 dB, 5-Bit, TTL Driver, DC - 2 GHz
V 3.00
AT20-0263
Features
n Attenuation: 1 dB steps to 31 dB n Temperature Stability: ± 0.18 dB from –40°C to +85°C n n n n n
CR-12
Typical Low DC Power Consumption Surface Mount Package Integral TTL Driver Low Cost/High Performance Tyco Electronics driver | | |
| 7 | AT20-0273 | Digital Attenuator/ 32 dB/ 2-Bit/ TTL Driver/ DC - 2 GHz Digital Attenuator, 32 dB, 2-Bit, TTL Driver, DC - 2 GHz
V 3.00
AT20-0273
Features
n Attenuation: 16 dB steps to 32 dB n Temperature Stability: ± 0.18 dB from –40°C to +85°C n n n n n
CR-11
Typical Low DC Power Consumption Surface Mount Package Integral TTL Driver Low Cost/High Performance Tyco Electronics driver | |
| Esta página es del resultado de búsqueda del AT25DF081A. Si pulsa el resultado de búsqueda de AT25DF081A se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |