|
|
Datasheet ASPE Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | ASPE | CERAMIC SMD CRYSTAL CLOCK OSCILLATOR CERAMIC SMD CRYSTAL CLOCK OSCILLATOR WITH VOLTAGE CONTROL
ASPE SERIES
7.0 x 5.08 x 1.8mm
| | | | | | | | | | | | | | |
FEATURES: • Complimentary PECL Outputs • Suitable for high density SMT., • Compact and low in height Reflow capable • Tri state function • Tight stability option • 2.5V |  Abracon Corporation | oscillator |
ASP Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | ASP-134486-01 | .050 PITCH SOCKET ARRAY ASSEMBLY REVISION L
DO NOT SCALE FROM THIS PRINT
C
NOTES: 1. VITA 57 CONNECTOR. 2. C REPRESENTS A CRITICAL DIMENSION. 3. MINIMUM PUSHOUT FORCE: 0.50 LBS. 4. PARTS TO BE PACKAGED IN TAPE & REEL. 5. DIMENSION C12 MUST BE MEASURED IN THE FOUR OUTSIDE CORNERS USING INSPECTION FIXTURE AT-1817-836-2, USE CO-AU-WI  Samtec data | | |
| 2 | ASP-134488-01 | .050 PITCH TERMINAL ARRAY ASSEMBLY REVISION M
DO NOT SCALE FROM THIS PRINT
NOTES: 1. VITA 57 CONNECTOR. 2. C REPRESENTS A CRITICAL DIMENSION. 3. MINIMUM PUSHOUT FORCE: 0.50 LBS. 4. PARTS TO BE PACKAGED IN TAPE AND REEL. 5. NOTE DELETED. 6. DIMENSION C10 MUST BE MEASURED USING INSPECTION FIXTURE AT-1817-836-2,USE CO-AU-WI-2003-M FOR Samtec data | | |
| 3 | ASP-134603-01 | .050 PITCH SOCKET ARRAY ASSEMBLY REVISION H
DO NOT SCALE FROM THIS PRINT
NOTES: 1. FILL ROWS 3, 4, 7, 8 ONLY, NOT AVAILABLE AS STANDARD. 2. C REPRESENTS A CRITICAL DIMENSION. 3. MINIMUM PUSHOUT FORCE: .75 LB. 4. PARTS TO BE PACKAGED IN TAPE & REEL. 5. TAPE AND REEL WILL BE SUPPLIED WHETHER OR NOT -TR IS SPECIFIED 6. FOR QUANTITIES Samtec data | | |
| 4 | ASP-150 | 150W Single Output 150W Single Output with PFC Function
Features :
ASP-150
series
Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection High power density 8.4w/in3 100% full load burn-in test No lo  Mean Well data | | |
| 5 | ASP-LDM-0980-001W-x3 | High-Power Laser Diode www.alliedscientificpro.com
High-Power Laser Diode 980nm
Description
The 980nm series high power laser diodes with optimized QW structure have a high reliability, high
performance. It has several structures of emitter width. The 980nm series high power laser diodes can get
0.3W 、0.5W、1.0W �  Allied Scientific Pro diode | | |
| 6 | ASP-LDM-0980-002W-x4 | High-Power Laser Diode www.alliedscientificpro.com
High-Power Laser Diode 980nm
Description
The 980nm series high power laser diodes with optimized QW structure have a high reliability, high
performance. It has several structures of emitter width. The 980nm series high power laser diodes can get
0.3W 、0.5W、1.0W � Allied Scientific Pro diode | | |
| 7 | ASP-LDM-0980-003W-x4 | High-Power Laser Diode www.alliedscientificpro.com
High-Power Laser Diode 980nm
Description
The 980nm series high power laser diodes with optimized QW structure have a high reliability, high
performance. It has several structures of emitter width. The 980nm series high power laser diodes can get
0.3W 、0.5W、1.0W � Allied Scientific Pro diode | |
| Esta página es del resultado de búsqueda del ASPE. Si pulsa el resultado de búsqueda de ASPE se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |