|
|
Datasheet A8180 Equivalent ( PDF ) |
| N.º | Número de pieza | Descripción | Fabricantes | Category |
| 1 | A8180 | 1.4A STEP-DOWN LED DRIVER AiT Semiconductor Inc.
www.ait-ic.com
A8180
36V, 1.4A STEP-DOWN LED DRIVER HIGH BRIGHTNESS WITH INTERNAL SWITCH
DESCRIPTION
The A8180 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the |  AiT Semiconductor | led |
| 2 | A8180SLU | Surface-Mount/ Low Quiescent Current/ Low Dropout Voltage Dropper Type qA8180SLU/SLT Series
A8180SLU/SLT Series
A8184SLT, A8187SLT are product of Allegro Microsystems, INC.
Surface-Mount, Low Quiescent Current, Low Dropout Voltage Dropper Type
sFeatures
• Compact surface-mount package (equivalent to SOT-89) • Output current: 0.15A • Low circuit current Iq≤60 |  Sanken electric | data |
A81 Datasheet ( Hoja de datos ) - resultados coincidentes |
| N.º | Número de pieza | Descripción | Fabricantes | Catagory |
| 1 | A81 | 20 TO 250 MHz CASCADABLE AMPLIFIER A81/SMA81
20 TO 250 MHz CASCADABLE AMPLIFIER · HIGH REVERSE ISOLATION: >30 dB (TYP.) · HIGH GAIN: 26 dB (TYP.) · HIGH LEVEL OUTPUT: +17 dBm (TYP.) · LOW NOISE: 2.6 dB (TYP.)
Specifications (Rev. Date: 11/00)*
Characteristics Frequency Small Signal Gain (min.) Gain Flatness (max.) Reverse Isolati  Tyco Electronics amplifier | | |
| 2 | A81-1 | CASCADABLE AMPLIFIER Tyco Electronics amplifier | | |
| 3 | A81-2 | CASCADABLE AMPLIFIER Tyco Electronics amplifier | | |
| 4 | A81-3 | CASCADABLE AMPLIFIER Cascadable Amplifier 20 to 500 MHz
Features
• • • • HIGH REVERSE ISOLATION >35 dBm (TYP.) EXCEPTIONAL OUTPUT VSWR 1.1:1 (TYP.) LOW NOISE 3.6 dB (TYP.) MEDIUM OUTPUT LEVEL +8.0 dBm (TYP.)
A81-3/ SMA81-3
V2
Product Image
Description
The A81-3 RF amplifier is a discrete hybrid design, which Tyco Electronics amplifier | | |
| 5 | A81-A150X | 2-Electrode-Arrester Surge Arrester 2-Electrode-Arrester
A81-A150X Ordering code: B88069X2840S102
DC spark-over voltage 1) 2) Impulse spark-over voltage at 100 V/µs - for 99 % of measured values - typical values of distribution at 1 kV/µs - for 99 % of measured values - typical values of distribution
150 ± 20 < 50  EPCOS data | | |
| 6 | A81-A230X | 2-Electrode-Arrester Surge Arrester 2-Electrode-Arrester
A81-A230X Ordering code: B88069X2250S102
DC spark-over voltage 1) 2) Impulse spark-over voltage at 100 V/µs - for 99 % of measured values - typical values of distribution at 1 kV/µs - for 99 % of measured values - typical values of distribution
230 ± 20 < 50 EPCOS data | | |
| 7 | A81-A250X | 2-Electrode-Arrester Surge Arrester 2-Electrode-Arrester
A81-A250X Ordering code: B88069X1500xxxx a)
DC spark-over voltage 1) Impulse spark-over voltage at 100 V/µs - for 99 % of measured values - typical values of distribution at 1 kV/µs - for 99 % of measured values - typical values of distribution
250 ± 20 < 55 EPCOS data | |
| Esta página es del resultado de búsqueda del A8180. Si pulsa el resultado de búsqueda de A8180 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
nuevas actualizaciones
| Número de pieza | Descripción | Fabricantes | |
| SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
 Sanken |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |