|
|
Datasheet 74LS76 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | 74LS76 | LOW POWER SCHOTTKY SN74LS76A Dual JK Flip-Flop with Set and Clear
The SN74LS76A offers individual J, K, Clock Pulse, Direct Set and Direct Clear inputs. These dual flip-flops are designed so that when the clock goes HIGH, the inputs are enabled and data will be accepted. The Logic Level of the J and K inputs will perf | ON Semiconductor | data |
2 | 74LS76 | Dual J-K Flip-Flop(with Preset and Clear) 19.20 20.00 Max 16 9 7.40 Max 6.30
Unit: mm
1 1.3
1.11 Max
8
0.51 Min
2.54 Min 5.06 Max
7.62
2.54 ± 0.25
0.48 ± 0.10
0.25 – 0.05 0° – 15°
Hitachi Code JEDEC EIAJ Weight (reference value)
+ 0.13
DP-16 Conforms Conforms 1.07 g
Unit: mm
10.06 10.5 Max 16 9
5.5
1
*0.22 ± 0.05 0.20 | Hitachi Semiconductor | flip-flop |
3 | 74LS76 | DUAL JK FLIP - FLOP | ETC | data |
4 | 74LS76A | DUAL JK FLIP-FLOP DUAL JK FLIP-FLOP WITH SET AND CLEAR
The SN54 / 74LS76A offers individual J, K, Clock Pulse, Direct Set and Direct Clear inputs. These dual flip-flops are designed so that when the clock goes HIGH, the inputs are enabled and data will be accepted. The Logic Level of the J and K inputs will perform a | Motorola Semiconductors | flip-flop |
74L Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | 74L74 | Dual Positive Edge Triggered D Flip-Flop National Semiconductor flip-flop | | |
2 | 74LCX00 | Low Voltage Quad 2-Input NAND Gate 74LCX00 — Low Voltage Quad 2-Input NAND Gate with 5V Tolerant Inputs
December 2013
74LCX00 Low Voltage Quad 2-Input NAND Gate with 5V Tolerant Inputs
Features
■ 5V tolerant inputs ■ 2.3V–3.6V VCC specifications provided ■ 5.2ns tPD max. (VCC = 3.3V), 10µA ICC max. ■ Power down high i Fairchild Semiconductor gate | | |
3 | 74LCX00 | Low voltage CMOS QUAD 2-Input NAND gate 74LCX00
Low-voltage CMOS quad dual input NAND gate with 5 V tolerant inputs
Datasheet −production data
Features
■ 5 V tolerant inputs ■ High speed
– tPD = 4.3 ns (max.) at VCC = 3 V ■ Power-down protection on inputs and outputs ■ Symmetrical output impedance
– |IOH| = IOL = 24 mA (m ST Microelectronics gate | | |
4 | 74LCX00M | Low Voltage Quad 2-Input NAND Gate 74LCX00 — Low Voltage Quad 2-Input NAND Gate with 5V Tolerant Inputs
December 2013
74LCX00 Low Voltage Quad 2-Input NAND Gate with 5V Tolerant Inputs
Features
■ 5V tolerant inputs ■ 2.3V–3.6V VCC specifications provided ■ 5.2ns tPD max. (VCC = 3.3V), 10µA ICC max. ■ Power down high i Fairchild Semiconductor gate | | |
5 | 74LCX00MTC | Low Voltage Quad 2-Input NAND Gate with 5V Tolerant Inputs 74LCX00 Low Voltage Quad 2-Input NAND Gate with 5V Tolerant Inputs
March 1995 Revised March 1999
74LCX00 Low Voltage Quad 2-Input NAND Gate with 5V Tolerant Inputs
General Description
The LCX00 contains four 2-input NAND gates. The inputs tolerate voltages up to 7V allowing the interface of 5V sys Fairchild Semiconductor gate | | |
6 | 74LCX00MTCX | Low Voltage Quad 2-Input NAND Gate with 5V Tolerant Inputs 74LCX00 Low Voltage Quad 2-Input NAND Gate with 5V Tolerant Inputs
March 1995 Revised March 1999
74LCX00 Low Voltage Quad 2-Input NAND Gate with 5V Tolerant Inputs
General Description
The LCX00 contains four 2-input NAND gates. The inputs tolerate voltages up to 7V allowing the interface of 5V sys Fairchild Semiconductor gate | | |
7 | 74LCX00SJ | Low Voltage Quad 2-Input NAND Gate 74LCX00 — Low Voltage Quad 2-Input NAND Gate with 5V Tolerant Inputs
December 2013
74LCX00 Low Voltage Quad 2-Input NAND Gate with 5V Tolerant Inputs
Features
■ 5V tolerant inputs ■ 2.3V–3.6V VCC specifications provided ■ 5.2ns tPD max. (VCC = 3.3V), 10µA ICC max. ■ Power down high i Fairchild Semiconductor gate | |
Esta página es del resultado de búsqueda del 74LS76. Si pulsa el resultado de búsqueda de 74LS76 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |