ST24/25C02, ST24C02R ST24/25W02 SERIAL 2K (256 x 8) EEPROM 1 MILLION ERASE/WRITE CYCLES with 40 YEARS DATA RETENTION SINGLE SUPPLY VOLTAGE: – 3V to 5.5V for ST24x02 versions – 2.5V to 5.5V for S

Two-Wire Serial EEPROM 32K, 64K (8-bit wide) 24C32A, 24C64A FEATURES ‰ Low voltage and low power operations: • FT24C32A/64A: VCC = 1.8V to 5.5V ‰ Maximum Standby current < 1µA (typically 0.02µA and 0.06µA @ 1.8V and 5.5V respectively). ‰ 32 bytes page write mode.

Not recommended for new designs – Please use 24LC01SC or 24LC02SC. 24C01SC/24C02SC 1K/2K 5.0V I2C™ Serial EEPROMs for Smart Cards Features: • ISO Standard 7816 pad locations • Low-power CMOS technology - 1 mA active current typical - 10 µA standby current typical a

NM24C02/03 – 2K-Bit Standard 2-Wire Bus Interface Serial EEPROM February 2000 NM24C02/03 – 2K-Bit Standard 2-Wire Bus Interface Serial EEPROM General Description The NM24C02/03 devices are 2048 bits of CMOS non-volatile electrically erasable memory. These devices conform to

24C01A/02A/04A 1K/2K/4K 5.0V I2C™ Serial EEPROMs FEATURES • • • • • • • • • • • Low power CMOS technology Hardware write protect Two wire serial interface bus, I2C™ compatible 5.0V only operation Self-timed write cycle (including auto-erase) Page-write b

24LC04B/08B 4K/8K 2.5V I2C™ Serial EEPROMs FEATURES • Single supply with operation down to 2.5V • Low power CMOS technology - 1 mA active current typical - 10 µA standby current typical at 5.5V - 5 µA standby current typical at 3.0V • Organized as two or four blocks of

24C65 64K 5.0V I2C™ Smart Serial™ EEPROM FEATURES • Voltage operating range: 4.5V to 5.5V - Peak write current 3 mA at 5.5V - Maximum read current 150 µA at 5.5V - Standby current 1 µA typical • Industry standard two-wire bus protocol, I2C™ compatible • 8 byte page,