|
|
STTH16L06C-YのメーカーはSTMicroelectronicsです、この部品の機能は「Automotive turbo 2 ultrafast high voltage rectifier」です。 |
部品番号 | STTH16L06C-Y |
| |
部品説明 | Automotive turbo 2 ultrafast high voltage rectifier | ||
メーカ | STMicroelectronics | ||
ロゴ | |||
このページの下部にプレビューとSTTH16L06C-Yダウンロード(pdfファイル)リンクがあります。 Total 9 pages
STTH16L06C-Y
Automotive turbo 2 ultrafast high voltage rectifier
A1
K
A2
A2
K
A1
TO-220AB
Features
• AEC-Q101 qualified
• Ultrafast switching
• Low reverse recovery current
• Reduces switching and conduction losses
• Low thermal resistance
• PPAP capable
• ECOPACK®2 compliant component
Datasheet - production data
Description
The STTH16L06C-Y is developed using ST’s
Turbo 2 600 V technology. It’s specially suited for
use in switching power supplies as rectifier and
discontinuous mode PFC boost diode for
automotive applications.
Table 1. Device summary
Symbol
Value
IF(AV)
VRRM
Tj
VF (typ)
trr (max)
Up to 2 x 10 A
600 V
175 °C
1.05 V
35 ns
December 2014
This is information on a product in full production.
DocID026936 Rev 2
1/9
www.st.com
1 Page STTH16L06C-Y
Characteristics
Symbol
Table 5. Dynamic electrical characteristics
Parameter
Test conditions
Min. Typ Max. Unit
IF = 0.5 A, Irr = 0.25 A,
IR = 1 A
trr Reverse recovery time Tj = 25 °C IF = 1 A,
dIF/dt = 50 A/µs,
VR = 30 V
IF = 8 A,
IRM Reverse recovery current Tj = 125 °C dIF/dt = 100 A/µs,
VR = 400 V
tfr Forward recovery time
IF = 8 A
Tj = 25 °C dIF/dt = 100 A/µs
VFP Forward recovery voltage
VFR = 1.1 x VFmax
35
ns
40 55
4.5 6.5
A
200 ns
3.5 V
DocID026936 Rev 2
3/9
9
3Pages Package information
2 Package information
STTH16L06C-Y
• Epoxy meets UL94, V0
• Cooling method: by conduction (C)
• Recommended torque value for TO-220AB and TO-220FPAB: 0.4 N·m to 0.6 N·m
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Figure 11. TO-220AB dimension definitions
Resin gate
0.5 mm max.
protrusion(1)
E
∅P
Q
A
F
H1
D D1
L20 L30
b1 L1 J1
L
b
e Resin gate
0.5 mm max.
protrusion(1)
e1
(1) Resin gate position accepted in each of the two
position shown as well as the symmetrical opposites
c
6/9 DocID026936 Rev 2
6 Page | |||
ページ | 合計 : 9 ページ | ||
|
PDF ダウンロード | [ STTH16L06C-Y データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
STTH16L06C-Y | Automotive turbo 2 ultrafast high voltage rectifier | STMicroelectronics |