DataSheet.jp

UPD5713TK の電気的特性と機能

UPD5713TKのメーカーはRenesasです、この部品の機能は「WIDE BAND SPDT SWITCH」です。


製品の詳細 ( Datasheet PDF )

部品番号 UPD5713TK
部品説明 WIDE BAND SPDT SWITCH
メーカ Renesas
ロゴ Renesas ロゴ 




このページの下部にプレビューとUPD5713TKダウンロード(pdfファイル)リンクがあります。

Total 14 pages

No Preview Available !

UPD5713TK Datasheet, UPD5713TK PDF,ピン配置, 機能
DATA SHEET
CMOS INTEGRATED CIRCUIT
μPD5713TK
WIDE BAND SPDT SWITCH
DESCRIPTION
The μPD5713TK is a CMOS MMIC for wide band SPDT (Single Pole Double Throw) switch which were developed
for mobile communications, wireless communications and another general-purpose RF switching application.
This device can operate frequency from 0.05 to 2.5 GHz, having the low insertion loss and high isolation.
This device is housed in a 6-pin lead-less minimold (1511) package. And this package is able to high-density
surface mounting.
FEATURES
• Supply voltage
: VDD = 1.8 to 3.6 V (2.8 V TYP.)
• Switch control voltage
: Vcont (H) = 1.8 to 3.6 V (2.8 V TYP.)
: Vcont (L) = 0.2 to +0.4 V (0 V TYP.)
• Low insertion loss
: Lins1 = 0.6 dB TYP. @ f = 0.05 to 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
: Lins2 = 0.8 dB TYP. @ f = 1.0 to 2.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
: Lins3 = 0.95 dB TYP. @ f = 2.0 to 2.5 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
• High isolation
: ISL1 = 32.5 dB TYP. @ f = 0.05 to 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
: ISL2 = 25 dB TYP. @ f = 1.0 to 2.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
: ISL3 = 22.5 dB TYP. @ f = 2.0 to 2.5 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
• Handling power
: Pin (1 dB) = +21.0 dBm TYP. @ f = 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
: Pin (0.1 dB) = +17.0 dBm TYP. @ f = 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V
• High-density surface mounting : 6-pin lead-less minimold package (1.5 × 1.1 × 0.55 mm)
APPLICATIONS
• Mobile communications
• Wireless communications
• Another general-purpose RF switching applications
ORDERING INFORMATION
Part Number
μPD5713TK-E2
Order Number
μPD5713TK-E2-A
Package
6-pin lead-less minimold
(1511) (Pb-Free)
Marking
Supplying Form
C3Q
Embossed tape 8 mm wide
Pin 1, 6 face the perforation side of the tape
Qty 5 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order: μPD5713TK
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PU10627EJ01V0DS (1st edition)
Date Published September 2006 NS CP(K)
Printed in Japan
2006

1 Page





UPD5713TK pdf, ピン配列
μPD5713TK
ELECTRICAL CHARACTERISTICS
(TA = +25°C, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V, DC cut capacitors = 1 000 pF, unless
otherwise specified)
Parameter
Insertion Loss 1
Insertion Loss 2
Insertion Loss 3
Isolation 1
Isolation 2
Isolation 3
Input Return Loss
Output Return Loss
0.1 dB Loss Compression
Input Power Note 1
1 dB Loss Compression
Input Power Note 2
Supply Current
Switch Control Current
Switch Control Speed
Symbol
Test Conditions
Lins1 f = 0.05 to 1.0 GHz
Lins2 f = 1.0 to 2.0 GHz
Lins3 f = 2.0 to 2.5 GHz
ISL1 f = 0.05 to 1.0 GHz
ISL2 f = 1.0 to 2.0 GHz
ISL3 f = 2.0 to 2.5 GHz
RLin f = 0.05 to 2.5 GHz
RLout f = 0.05 to 2.5 GHz
Pin (0.1 dB) f = 1.0 GHz
Pin (1 dB) f = 1.0 GHz
IDD VDD = Vcont = 2.8 V, RF off
Icont VDD = Vcont = 2.8 V, RF off
tSW f = 1.0 GHz
MIN.
30
22
20
13
13
+13.0
TYP.
0.6
0.8
0.95
32.5
25
22.5
17
17
+17.0
MAX.
0.8
1.0
1.2
Unit
dB
dB
dB
dB
dB
dB
dB
dB
dBm
+21.0
dBm
0.01 1.0 μA
0.01 1.0 μA
30 100 ns
Notes 1. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of
linear range.
2. Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear
range.
Caution This device is used it is necessary to use DC cut capacitors.
The value of DC cut capacitors should be chosen to accommodate the frequency of operation,
bandwidth, switching speed and the condition with actual board of your system.
Data Sheet PU10627EJ01V0DS
3


3Pages


UPD5713TK 電子部品, 半導体
μPD5713TK
TYPICAL CHARACTERISTICS
(TA = +25°C, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V, Pin = 0 dBm, DC cut capacitors = 1 000 pF,
unless otherwise specified)
INPUT–OUTPUT1
INSERSION LOSS vs. FREQUENCY
2.5
2.0
1.5
1.0
0.5
0
1
–0.5
1: –0.584 dB
0.5 GHz
2: –0.659 dB
1.0 GHz
3: –0.730 dB
1.5 GHz
4: –0.811 dB
2.0 GHz
5: –0.924 dB
2.5 GHz
–1.0 2 3 4 5
–1.5
–2.0
–2.5
0
0.5 1.0 1.5 2.0 2.5 3.0
Frequency f (GHz)
INPUT–OUTPUT2
INSERSION LOSS vs. FREQUENCY
2.5
2.0
1.5
1.0
0.5
0
–0.5
1
1: –0.584 dB
0.5 GHz
2: –0.653 dB
1.0 GHz
3: –0.731 dB
1.5 GHz
4: –0.826 dB
2.0 GHz
5: –0.968 dB
2.5 GHz
–1.0
–1.5
2345
–2.0
–2.5
0
0.5 1.0 1.5 2.0 2.5 3.0
Frequency f (GHz)
INPUT–OUTPUT1
ISOLATION vs. FREQUENCY
40
1: –38.2 dB
30 0.5 GHz
2: –31.7 dB
20 1.0 GHz
10
3: –27.4 dB
1.5 GHz
0 4: –23.9 dB
2.0 GHz
–10 5: –22.4 dB
2.5 GHz
–20
–30 1
345
–40 2
–50
–60
0
0.5 1.0 1.5 2.0 2.5
Frequency f (MHz)
3.0
INPUT–OUTPUT2
ISOLATION vs. FREQUENCY
40
1: –39.0 dB
30 0.5 GHz
2: –31.8 dB
20 1.0 GHz
10
3: –27.9 dB
1.5 GHz
0 4: –24.4 dB
2.0 GHz
–10 5: –21.6 dB
2.5 GHz
–20
–30 1
345
–40 2
–50
–60
0
0.5 1.0 1.5 2.0 2.5
Frequency f (MHz)
3.0
INPUT–OUTPUT1
INPUT RETURN LOSS vs. FREQUENCY
40
1: –26.0 dB
30
0.5 GHz
2: –21.5 dB
20
1.0 GHz
3: –19.5 dB
10
1.5 GHz
4: –18.3 dB
0
2.0 GHz
5: –18.9 dB
2.5 GHz
–10
–20 1
–30 2 3 4 5
–40
–50
–60
0
0.5 1.0 1.5 2.0 2.5 3.0
Frequency f (MHz)
Remark The graphs indicate nominal characteristics.
INPUT–OUTPUT2
INPUT RETURN LOSS vs. FREQUENCY
40
1: –26.4 dB
30 0.5 GHz
2: –21.8 dB
20
1.0 GHz
3: –19.6 dB
10
1.5 GHz
4: –18.5 dB
0
2.0 GHz
5: –18.3 dB
2.5 GHz
–10
–20 1
–30 2 3 4 5
–40
–50
–60
0
0.5 1.0 1.5 2.0 2.5 3.0
Frequency f (MHz)
6 Data Sheet PU10627EJ01V0DS

6 Page



ページ 合計 : 14 ページ
 
PDF
ダウンロード
[ UPD5713TK データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
UPD5713TK

WIDE BAND SPDT SWITCH

CEL
CEL
UPD5713TK

WIDE BAND SPDT SWITCH

Renesas
Renesas


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap