|
|
Número de pieza | HD74ALVC166245A | |
Descripción | 16-Bit Dual-supply Bus Transceiver | |
Fabricantes | Renesas | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HD74ALVC166245A (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
No Preview Available ! HD74ALVC166245A
16–Bit Dual–supply Bus Transceiver with 3–state Outputs
Description
REJ03D0158–0201
Rev.2.01
Apr. 12, 2005
The HD74ALVC166245A has 16 bus transceivers with three state outputs in a 48-pin package. When (DIR) is high,
data flows from the A inputs to the B outputs, and when (DIR) is low, data flows from the B inputs to the A outputs. A
and B bus are separated by making enable input (OE) high level. This 16-bit non-inverting bus transceiver uses two
separate power-supply rails.
And this product has two terminals (VCCA, VCCB), VCCA is connected with A bus side, VCCB is connected with control
input and B bus. VCCA and VCCB are isolated.
The A port is designed to track VCCA, which accepts voltages from 1.2 V to 2.7 V, and the B port is designed to track
VCCB, which operates at 1.4 V to 3.6 V. Therefore, Bidirectional broad voltage conversion is possible.
Low voltage and high-speed operation is suitable at the battery drive product (note type personal computer) and low
power consumption extends the life of a battery for long time operation.
Features
• This product function as level shift transceiver that change VCCA input level to VCCB output level, VCCB
Input level to VCCA output level by providing different supply voltage to VCCA and VCCB.
• VCCA = 1.2 V to 2.7 V, VCCB = 1.4 V to 3.6 V (VCCA < VCCB)
• All control input VI (max) = 3.6 V (@VCCB = 0 V to 3.6 V)
• All A bus side input outputs VI/O (max) = 3.6 V
(@VCCA = 0 V or output off state)
• All B bus side input outputs VI/O (max) = 3.6 V
(@VCCB = 0 V or output off state)
• High output current
A bus side: ±2 mA (@VCCA = 1.2 V)
±4 mA (@VCCA = 1.5±0.1 V)
±6 mA (@VCCA = 1.8±0.15 V)
B bus side: ±4 mA (@VCCB = 1.5±0.1 V)
±6 mA (@VCCB = 1.8±0.15 V)
±18 mA (@VCCB = 2.5±0.2 V)
±18mA (@VCCA = 2.5±0.2 V)
• Ordering Information
±24 mA (@VCCB = 3.3±0.3 V)
Part Name
Package Type
Package Code
(Previous Code)
Package
Abbreviation
Taping Abbreviation
(Quantity)
HD74ALVC166245ATEL
TSSOP–48Pin
PTSP0048KA–A
(TTP–48DBV)
T EL (1,000pcs / Reel)
Rev.2.01 Apr. 12, 2005 page 1 of 12
1 page HD74ALVC166245A
Electrical Characteristics (Cont)
(Ta = –40 to 85°C)
Item
Symbol VCCB (V)
Output voltage
VOHB
1.5±0.1
1.8±0.15
2.5±0.2
3.3±0.3
VOHA 1.4 to 3.6
1.65 to 3.6
2.3 to 3.6
3.0 to 3.6
VOLB
1.5±0.1
1.8±0.15
2.5±0.2
3.3±0.3
VOLA 1.4 to 3.6
1.65 to 3.6
2.3 to 3.6
3.0 to 3.6
Input current
IIN
3.6
VCCA (V)
1.2
1.2 to 1.6
1.2 to 1.95
1.2 to 2.7
1.2
1.5±0.1
1.8±0.15
2.5±0.2
1.2
1.2 to 1.6
1.2 to 1.95
1.2 to 2.7
1.2
1.5±0.1
1.8±0.15
2.5±0.2
2.7
Min
VCCB–0.2
1.1
VCCB–0.2
1.25
VCCB–0.2
1.70
VCCB–0.2
2.20
VCCA–0.2
0.90
VCCA–0.2
1.10
VCCA–0.2
1.25
VCCA–0.2
1.70
Max
0.2
0.3
0.2
0.3
0.2
0.6
0.2
0.55
0.2
0.3
0.2
0.3
0.2
0.3
0.2
0.6
±5.0
Unit
V
V
V
V
µA
Test Conditions
IOH = –100 µA
IOH = –4 mA
IOH = –100 µA
IOH = –6 mA
IOH = –100 µA
IOH = –18 mA
IOH = –100 µA
IOH = –24 mA
IOH = –100 µA
IOH = –2 mA
IOH = –100 µA
IOH = –4 mA
IOH = –100 µA
IOH = –6 mA
IOH = –100 µA
IOH = –18 mA
IOL = 100 µA
IOL = 4 mA
IOL = 100 µA
IOL = 6 mA
IOL = 100 µA
IOL = 18 mA
IOL = 100 µA
IOL = 24 mA
IOL = 100 µA
IOL = 2 mA
IOL = 100 µA
IOL = 4 mA
IOL = 100 µA
IOL = 6 mA
IOL = 100 µA
IOL = 18 mA
VI = GND or VCCB
Control input
Off state
output current
Output leak
current
IOZ
IOFF
3.6
0
2.7 ±10 µA VIN = VIH or VIL
0 10 µA VIN, VOUT = 0 to 3.6 V
Quiescent
supply current
Increase in ICC
per Input*1
ICCB
ICCA
ICCB
ICCA
∆ICCB
∆ICCA
3.6
3.6
3.6
3.6
3.6
3.6
2.7 20 µA IO (B port) = 0,
AIN = VCCA or GND
2.7 20
IO (A port) = 0,
BIN = VCCB or GND
2.7 ±20
VCCB ≤ (VIN, VOUT) ≤ 3.6 V
2.7 ±20
VCCA ≤ (VIN, VOUT) ≤ 3.6 V
2.7 750 µA B port or control input
One input at VCCB–0.6 V
Other input at VCCB or GND
2.7 750
A port
One input at VCCA–0.6 V
Other input at VCCA or GND
Notes: For condition shown as Min or Max use the appropriate values under recommended operating conditions.
1. This is the increase in supply current for each input that is at the specified TTL voltage level rather than VCC
or GND.
Rev.2.01 Apr. 12, 2005 page 5 of 12
5 Page HD74ALVC166245A
Waveforms – 2
tf
Output Control
90 %
VM
10 %
t ZL
Waveform–A
VM
t ZH
Waveform–B
VM
tr
10 %
90 %
VM
t LZ
VX
t HZ
VY
VIH
GND
VOH
V OL
V OH
GND
Symbol
3.3±0.3 V
VIH 2.7 V
VM 1.5 V
VX VOL+0.3 V
VY VOH−0.3 V
VCC
2.5±0.2 V 1.8±0.15 V
VCC
VCC
1/2 VCC
1/2 VCC
VOL+0.15 V VOL+0.15 V
VOH−0.15 V VOH−0.15 V
1.5±0.1 V
VCC
1/2 VCC
VOL+0.1 V
VOH−0.1 V
1.2 V
VCC
1/2 VCC
VOL+0.1 V
VOH−0.1 V
Notes: 1. All input pulses are supplied by generators having the following characteristics:
PRR ≤ 10 MHz, Zo = 50 Ω, tr ≤ 2.0 ns, tf ≤ 2.0 ns.
2. Waveform – A is for an output with internal conditions such that the output is low except
when disabled by the output control.
3. Waveform – B is for an output with internal conditions such that the output is high except
when disabled by the output control.
4. The output are measured one at a time with one transition per measurement.
Rev.2.01 Apr. 12, 2005 page 11 of 12
11 Page |
Páginas | Total 13 Páginas | |
PDF Descargar | [ Datasheet HD74ALVC166245A.PDF ] |
Número de pieza | Descripción | Fabricantes |
HD74ALVC166245A | 16-Bit Dual-supply Bus Transceiver | Renesas |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |