EEEFK1E101SP Datasheet PDF - Panasonic
| Part Number | EEEFK1E101SP | |
| Description | Aluminum Electrolytic Capacitors | |
| Manufacturers | Panasonic | |
| Logo |  |
|
|
There is a preview and EEEFK1E101SP download ( pdf file ) link at the bottom of this page. Total 2 Pages | ||
Preview 1 page No Preview Available !
Aluminum Electrolytic Capacitors/FKS
Surface Mount Type
Series: FKS Type: V
High temperature Lead-Free reflow
Features
Endurance: 2000 h at 105 ℃
1 size smaller than series FK
Vibration-proof product is available upon request. (φ8 mm and larger)
AEC-Q200 qualified*
RoHS directive compliant
Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan δ
Characteristics
at Low Temperature
-55 ℃ to +105 ℃
6.3 V.DC to 50 V.DC
39 μF to 1800 μF
±20 % (120 Hz/+20 ℃)
l ≦ 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
Please see the attached Standard Products list
W.V.(V)
6.3 10 16 25 35 50
Z（-25 ℃）/Z（+20 ℃） 2 2 2 2 2 2
Z（-40 ℃）/Z（+20 ℃） 3 3 3 3 3 3
(Impedance ratio at 120Hz)
Z（-55 ℃）/Z（+20 ℃） 4 4 4 3 3 3
After applying rated working voltage for 2000 hours at +105℃±2℃ and then being stabilized at +20℃,
capacitors shall meet the following limits.
Endurance
Capacitance Change
tan δ
DC Leakage Current
±30 % of initial measured value
≦ 200 % initial specified value
≦ initial specified value
Shelf Life
After storage for 1000 hours at +105 ℃±2 ℃ with no voltage applied and then being stabilized at +20 ℃,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Resistance to
Soldering Heat
After reflow soldering and then being stabilized at +20 ℃, capacitors shall meet the following limits.
Capacitance Change ±10 % of initial measured value
tan δ
≦ initial specified value
DC Leakage Current ≦ initial specified value
Frequency correction factor for ripple current
Capacitance (μF)
39 to 1800
Marking
120
0.65
Frequency (Hz)
1ｋ 10ｋ
0.85 0.95
Dimensions in mm (not to scale)
100ｋ to
1.00
Unit：mm
Example：6.3 V.DC / 270μF Marking color：BLACK
0.3 max.
A±0.2
Negative polarity marking (－)
Capacitance (μF)
270
j KS
Series identification
Rated voltage mark
LW
Lot number
Rated Voltage Mark
j 6.3 V.DC
A 10 V.DC
C 16 V.DC
E
V
H
25 V.DC
35 V.DC
50 V.DC
Size
code
D
L A, B H
I WP
K
D 6.3 5.8±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2
＊ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
|
| |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for EEEFK1E101SP electronic component. |
| Information | Total 2 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ EEEFK1E101SP.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| EEEFK1E101SP | The function is Aluminum Electrolytic Capacitors. Panasonic | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
EEEF
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||