|
|
Número de pieza | AZ888 | |
Descripción | SUBMINIATURE POWER RELAY | |
Fabricantes | American Zettler | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AZ888 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
No Preview Available ! AZ888
8 A SPST / 5 A DPST POLARIZED
SUBMINIATURE POWER RELAY
SINGLE SIDE STABLE (NON-LATCHING)
AND BISTABLE (LATCHING)
FEATURES
• Dielectric strength 3000 Vrms
• Single and dual coil latching versions available
• Epoxy sealed version available
• 8 Amp switching
• UL ,CUR file E44211
CONTACTS
Arrangement
Ratings
Rated Load
UL, CUR
SPST (1 Form A), DPST (2 Form A)
DPST (1 Form A and 1 Form B)
Resistive load:
Max. switched power: 500 W or 2000 VA (SPST)
150 W or 1250 VA (DPST)
Max. switched current: 8 A (SPST)
5 A (DPST)
Max. switched voltage: 240 VDC or 380 VAC*
*Note: If switching voltage is greater than 30 VDC,
special precautions must be taken. Please contact
the factory.
PLEASE SEE CHART ON FOLLOWING PAGE
Material
Resistance
No Gold plating
Gold plated
Silver tin oxide, gold plating optional
< 100 milliohms (6V 1A voltage drop method)
< 100 milliohms (6V 0.1A voltage drop method)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
3 x 104 at 8 A 250 VAC resistive (SPST)
Operate Time (typical) 5 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Set Time (typical)
5 ms at nominal coil voltage
Reset Time (typical) 4 ms at nominal coil voltage
Dielectric Strength
(at sea level) 1 min.
3000 Vrms contact to coil
1000 Vrms between open contacts
2000 Vrms between contact sets
Insulation Resistance 1000 megohms min. at 20°C
500 Vdc 50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
Vibration
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 130°C (266°F)
Functional 196m/s2
Destructive 980m/s2
Shock
Functional 10Hz to 55Hz 2.0mm DA
Destructive 10Hz to 55Hz 3.5mm DA
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
4.5 grams
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Max. Temperature
192 mW (single side stable, 2 coil latching)
96mW (1 coil latching)
0.75 W at 20°C (68°F) ambient
Monostable type: (typical) 45°C (113°F)
Latching type: (typical) 35°C (95°F)
155°C (311°F), Class F
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. For complete isolation between the relay’s magnetic fields, it is recom-
mended that a .197" (5.0 mm) space be provided between adjacent relays.
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
6. Specifications subject to change without notice.
6/30/14
1 page |
Páginas | Total 4 Páginas | |
PDF Descargar | [ Datasheet AZ888.PDF ] |
Número de pieza | Descripción | Fabricantes |
AZ880 | SUBMINIATURE POWER RELAY | ZETTLER |
AZ888 | SUBMINIATURE POWER RELAY | American Zettler |
AZ88923 | High-Speed Limiting Post Amplifier | Arizona Microtek |
AZ88943 | High-Speed Limiting Post Amplifier | Arizona Microtek |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |