DataSheet.jp

1N6464 の電気的特性と機能

1N6464のメーカーはMicrosemi Corporationです、この部品の機能は「TRANSIENT SUPPRESSORS」です。


製品の詳細 ( Datasheet PDF )

部品番号 1N6464
部品説明 TRANSIENT SUPPRESSORS
メーカ Microsemi Corporation
ロゴ Microsemi Corporation ロゴ 




このページの下部にプレビューと1N6464ダウンロード(pdfファイル)リンクがあります。

Total 3 pages

No Preview Available !

1N6464 Datasheet, 1N6464 PDF,ピン配置, 機能
SCOTTSDALE DIVISION
1N6461 thru 1N6468
Voidless-Hermetically-Sealed Unidirectional
Transient Suppressors
DESCRIPTION
This series of industry recognized voidless-hermetically-sealed Unidirectional
Transient Voltage Suppressor (TVS) designs is military qualified to MIL-PRF-
19500/551 and are ideal for high-reliability applications where a failure cannot be
tolerated. They provide a Working Peak “Standoff” Voltage selection from 5.0 to 51.6
Volts with 500 W ratings. They are very robust in hard-glass construction and also use
an internal metallurgical bond identified as Category I for high reliability applications.
The 500 W series is military qualified to MIL-PRF-19500/551. These devices are also
available in a surface mount MELF package configuration by adding a “US” suffix (see
separate data sheet for 1N6461US thru 1N6468US). Microsemi also offers numerous
other TVS products to meet higher and lower peak pulse power and voltage ratings in
both through-hole and surface-mount packages.
APPEARANCE
“E” Package
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
High surge current and peak pulse power provides
transient voltage protection for sensitive circuits
Triple-layer passivation
Internal “Category I” metallurgical bonds
Voidless hermetically sealed glass package
JAN/TX/TXV military qualifications available per MIL-
PRF-19500/551 by adding JAN, JANTX, or JANTXV
prefix
Further options for screening in accordance with MIL-
PRF-19500 for JANS by using a “SP” prefix, e.g.
SP6462, SP6468, etc.
Surface Mount equivalents are also available in a
square-end-cap MELF configuration with a “US” suffix
(see separate data sheet)
Military and other high reliability transient protection
Extremely robust construction
Working Peak “Standoff” Voltage (VWM) from 5.0 to
51.6 V
Available as 500 W Peak Pulse Power (PPP)
ESD and EFT protection per IEC61000-4-2 and
IEC61000-4-4 respectively
Secondary lightning protection per select levels in
IEC61000-4-5
Flexible axial-leaded mounting terminals
Nonsensitive to ESD per MIL-STD-750 Method
1020
Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
Operating & Storage Temperature: -55oC to +175oC
Peak Pulse Power at 25oC: 500 Watts @ 10/1000 µs
(also see Figures 1,2 and 4)
Impulse repetition rate (duty factor): 0.01%
Forward Surge Current: 80 Amps@ 8.33 ms one-half
sine wave
CASE: Hermetically sealed voidless hard glass
with Tungsten slugs
TERMINATIONS: Axial-leads are Tin/Lead (Sn/Pb)
over copper
MARKING: Body painted and part number, etc.
POLARITY: Cathode band
Forward Voltage: 1.5 V @ 1 Amp dc and 4.8 V at 100
Tape & Reel option: Standard per EIA-296
Amps (pulsed)
Steady-State Power: 2.5 Watts @ TA = 25oC (see
note below and Figure 4)
Weight: 750 mg
See package dimensions on last page
Thermal Resistance @ 3/8 inch lead length: 60 oC/W
Solder Temperatures: 260oC for 10 s (maximum)
NOTE: Steady-state power ratings with reference to ambient are for PC boards where thermal resistance from
mounting point to ambient is sufficiently controlled where TJ(MAX) is not exceeded.
Copyright © 2008
6-11-2008 REV C
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1

1 Page





1N6464 pdf, ピン配列
SCOTTSDALE DIVISION
1N6461 thru 1N6468
Voidless-Hermetically-Sealed Unidirectional
Transient Suppressors
FIGURE 3
8/20 µs CURRENT IMPULSE WAVEFORM
(per MIL-PRF-19500/551
T – Temperature – oC
FIGURE 4
DERATING CURVE
PACKAGE DIMENSIONS Inches [mm]
Lead Tolerance = + .002 -.003 in
*Includes sections of the lead or fillet over which the lead diameter is uncontrolled.
Copyright © 2008
6-11-2008 REV C
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 3


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ 1N6464 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
1N646

Silicon Switching Diode DO-35 Glass Package

Microsemi Corporation
Microsemi Corporation
1N646

STANDARD RECOVERY RECTIFIERS

Digitron Semiconductors
Digitron Semiconductors
1N646

Diode 300V 0.4A 2-Pin DO-35

New Jersey Semiconductor
New Jersey Semiconductor
1N646-1

Silicon Switching Diode DO-35 Glass Package

Microsemi Corporation
Microsemi Corporation


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap