|
|
PDF MCSO2E Data sheet ( Hoja de datos )
| Número de pieza | MCSO2E | |
| Descripción | SMT Clock oscillator | |
| Fabricantes | MICORO CRYSTAL SWITZERLAND | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MCSO2E (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
MCSO2E familypackage 5×3.2 mm
T range up to 210°C
DIMENSIONS
Package:
Bottom view
5.00
Recommended Solder Pad:
1.5 2.7 1.5
1.6
2.35
43
12
100% Leadfree, RoHScompliant:
12
1.6
43
3.20
pin 1 E/D
pin 2 GND
pin 3 Fout
pin 4 Vdd
All dimensions in mm typical
SMT Clock oscillator in ceramic
package
Fundamental quartz mode frequency
High shock and vibration resistance
Wide temperature range
Low aging
Ultra low MSL
Very fast start-up
Excellent solderability
Swiss made quality
Customer specification on request
Frequency stability
included 1000h at Tmax
DESCRIPTION:
This SMD oscillator in ceramic package has been specially designed for
surface mount using infrared, vapor phase or epoxy techniques.
Applications:
- Downhole and Well drilling equipments
- Avionics
- Airbone equipments
- Geothermal equipments
- Fire fighter equipments
The MCSO2's are supplied on trays (128 pcs / tray)
For pick-and-place equipment, the parts are available in 12mm tapes
with 250 parts min
1000 parts min
ELECTRICAL
CHARACTERISTICS AT +25°C
Frequency stability
Over temperature range C = -55 to +125°C
(see ordering info) Including 2)*
Frequency stability
Over temperature range E = -55 to +150°C
(see ordering info) Including 2)*
Frequency stability
Over temperature range D = -55 to +175°C
(see ordering info) Including 2)*
Frequency stability
Over temperature range G = -55 to +210°C
(see ordering info) Including 2)*
ΔF/F
ΔF/F
ΔF/F
ΔF/F
≤ ± 100
≤ ± 150
≤ ± 300
≤ ± 400
ppm
ppm
ppm
ppm
Supply voltage ± 5%
Input current
1)*
Vdd 2.5 / 3.3 / 5
V
Idd see table 1
Output signal
Symmetry at Vdd/2
Rise & fall time ≤ 20MHz
For F=32.768 kHz rise & fall time ≤ 150ns
(load 15pf 20% to 80%)
Rise & fall time ≥ 20MHz for
(load 15pf 10% to 90%)
HC-MOS compatible
40 / 60
%
≤7 ns
≤3 ns
Level "0" & "1"
Start-up time
<0.4>Vdd-0.5
V
t <5 ms
Load min / max
3/47 pF
* 1) C = 47nF ceramic must be connected between GND & Vdd
Operable over 2.3 to 5.5V
* 2) adjustment at +25°C, long term aging 1000h at Tmax ordered
over supply voltage ±5% and over load min to max
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet MCSO2E.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MCSO2 | SMT Clock oscillator | MICORO CRYSTAL SWITZERLAND |
| MCSO2E | SMT Clock oscillator | MICORO CRYSTAL SWITZERLAND |
| MCSO2EL | SMT Clock oscillator | MICORO CRYSTAL SWITZERLAND |
| MCSO2EU | SMT Clock oscillator | MICORO CRYSTAL SWITZERLAND |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |