|
|
Número de pieza | IRSM836-015MA | |
Descripción | Integrated Power Module | |
Fabricantes | International Rectifier | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de IRSM836-015MA (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
No Preview Available ! IRSM836-015MA
1A, 500V
Integrated Power Module for
Small Appliance Motor Drive Applications
Description
IRSM836-015MA is a 1A, 500V Integrated Power Module (IPM) designed for advanced appliance motor
drive applications such as energy efficient fans and pumps. IR's technology offers an extremely compact, high
performance AC motor-driver in an isolated package. This advanced IPM offers a combination of IR's low RDS(on)
Trench MOSFET technology and the industry benchmark 3-phase high voltage, rugged driver in a small PQFN
package. At only 12x12mm and featuring integrated bootstrap functionality, the compact footprint of this surface-
mount package makes it suitable for applications that are space-constrained. Integrated over-current protection,
fault reporting and under-voltage lockout functions deliver a high level of protection and fail-safe operation.
IRSM836-015MA functions without a heat sink.
Features
• Integrated gate drivers and bootstrap functionality
• Open-source for leg-shunt current sensing
• Protection shutdown pin
• Low RDS(on) Trench FREDFET
• Under-voltage lockout for all channels
• Matched propagation delay for all channels
• Optimized dV/dt for loss and EMI trade offs
• 3.3V Schmitt-triggered active high input logic
• Cross-conduction prevention logic
• Motor power range up to ~40W, without heat sink
• Isolation 1500VRMS min
IRSM836-015MA
Base Part Number
Package Type
IRSM836-015MA
36L
PQFN 12 x 12 mm
All part numbers are PbF
Standard Pack
Form
Tape and Reel
Tray
Quantity
2000
800
Orderable Part Number
IRSM836-015MATR
IRSM836-015MA
1 www.irf.com © 2014 International Rectifier
Submit Datasheet Feedback February 13, 2014
1 page IRSM836-015MA
Qualification Information†
Qualification Level
Moisture Sensitivity Level
ESD
Machine Model
Human Body Model
Industrial††
(per JEDEC JESD 47E)
MSL3†††
(per IPC/JEDEC J-STD-020C)
Class B
(per JEDEC standard JESD22-A115)
Class 2
(per standard ESDA/JEDEC JS-001-2012)
RoHS Compliant
Yes
† Qualification standards can be found at International Rectifier’s web site http://www.irf.com/
†† Higher qualification ratings may be available should the user have such requirements. Please contact
your International Rectifier sales representative for further information.
††† Higher MSL ratings may be available for the specific package types listed here. Please contact your
International Rectifier sales representative for further information.
5 www.irf.com © 2014 International Rectifier
Submit Datasheet Feedback February 13, 2014
5 Page IRSM836-015MA
Fault Reporting and Programmable Fault Clear Timer
The IRSM836-015MA provides an integrated fault reporting output and an adjustable fault clear timer.
There are two situations that would cause the IRSM836-015MA to report a fault via the FLT pin. The first is an
under-voltage condition of VCC and the second is when the ITRIP pin recognizes a fault.
The fault clear timer provides a means of automatically re-enabling the module operation a preset amount
of time after the fault condition has disappeared. When a fault condition occurs, the fault diagnostic output (FLT)
stays in the low state until the fault condition has been removed and the fault clear timer expires; once the fault
clear timer expires, the voltage on the FLT pin will return to the logic-high voltage. Figure 4a is a block-level
diagram that focuses on the fault diagnostic and fault clear timer functionality of the driver chip within the module.
The fault clear timer is defined with a simple resistor-capacitor (RC) network on the RCin pin, as shown in Figure
4b.
Figure 5 is a timing diagram showing the states of the FLT and RCin pins during both normal operation and
under a fault condition. Under normal operation, both FLT and RCin are in high impedance (open drain) states.
CRCIN is fully-charged, and FLT is pulled up high. When a fault condition occurs, RCin and FLT are pulled low to
VSS – CRCIN is discharged; once the fault condition has been removed, RCin returns to a high impedance state
and the fault clear timer begins – that is, CRCIN starts charging via RRCIN. tFLTCLR seconds later – when the RCin
voltage crosses a datasheet-defined threshold of VRCIN,TH, FLT returns to a high impedance state and the module
is operational again. tFLTCLR is determined by a simple RC network, shown in Figure 6 - RRCIN and CRCIN determine
how long the voltage at the RCin pin takes to reach the VRCIN,TH fixed threshold.
V cc
HIN (x3)
LIN (x3)
VB ( x3)
IRSM836-015MA
EN
FAULT
VS (x3)
RRCIN
RCIN
CRCIN
ITRIP
VSS
VRx
Figure 4a: Block diagram showing internal
functioning of fault diagnostic and fault clear timer
I-
Figure 4b: Programming the fault clear timer
11 www.irf.com © 2014 International Rectifier
Submit Datasheet Feedback February 13, 2014
11 Page |
Páginas | Total 20 Páginas | |
PDF Descargar | [ Datasheet IRSM836-015MA.PDF ] |
Número de pieza | Descripción | Fabricantes |
IRSM836-015MA | Integrated Power Module | International Rectifier |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |