|
|
Datasheet TLO164 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | TLO164 | High Panel Circuit Indicator | Toshiba Semiconductor | data |
TLO Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | TLO1002 | TOSHIBA LED LAMP
TOSHIBA
TLY1002, TLO1002, TLUR1002
Unit in mm
LED Surface Mount Device
Features • 2.0(L) x 1.25(W) x 1.1(H) mm Size - Small Package - High Density Mounting is Available • Available for Automounting Machine Use • Reflow Soldering is Applicable - Recommended Forward Curre Toshiba Semiconductor led | | |
2 | TLO163 | High Panel Circuit Indicator Toshiba Semiconductor data | | |
3 | TLO164 | High Panel Circuit Indicator Toshiba Semiconductor data | | |
4 | TLO251 | TLO251 ETC data | | |
5 | TLO84 | General Purpose J-FET Quad Operational Amplifier
®
TL084 TL084A - TL084B
GENERAL PURPOSEJ-FET QUAD OPERATIONAL AMPLIFIERS
. . . . . . .
WIDE COMMON-MODE (UP TO VCC+) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT PROTECTION HIGH INPUT IMPEDANCE J–FET INPUT STAGE INTERNAL FREQUENCY C ST Microelectronics amplifier | | |
6 | TLOE1002 | LED SMD Lamp TOSHIBA
LED SMD Lamp
LED Surface Mount Device
Features
• 2.0(L) x 1.25(W) x 1.1(H) mm Size
- Small Package - High Density Mounting is Available • Available for Automounting Machine Use
• Reflow Soldering is Applicable
• Low Drive Current, High Intensity Light Emission
- Recommended Forwar Toshiba Semiconductor data | | |
7 | TLOE1002A | LED Lamps TL(RE,SE,OE,YE,PYE,GE,FGE,PGE)1002A(T02)
TOSHIBA LED Lamps
TLRE1002A(T02), TLSE1002A(T02), TLOE1002A(T02), TLYE1002A(T02), TLPYE1002A(T02), TLGE1002A(T02), TLFGE1002A(T02), TLPGE1002A(T02)
Panel Circuit Indicator
Unit: mm
• Surface-mount devices • 2.0 (L) × 1.25 (W) × 1.1 (H) mm • InGaA� Toshiba data | |
Esta página es del resultado de búsqueda del TLO164. Si pulsa el resultado de búsqueda de TLO164 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |