|
|
AH5775のメーカーはDiodesです、この部品の機能は「SINGLE PHASE MOTOR DRIVER」です。 |
部品番号 | AH5775 |
| |
部品説明 | SINGLE PHASE MOTOR DRIVER | ||
メーカ | Diodes | ||
ロゴ | |||
このページの下部にプレビューとAH5775ダウンロード(pdfファイル)リンクがあります。 Total 12 pages
AH5775
SINGLE PHASE MOTOR DRIVER WITH
INTERNAL HALL EFFECT LATCH SENSOR
Description
The AH5775 is a single-chip solution for driving single-coil brushless
direct current (BLDC) fans and motors. The integrated full-bridge
driver output stage uses soft switching to minimize audible switching
noise and electromagnetic interference (EMI) providing a low-noise
solution.
Pin Assignments
(Front View)
To simplify system circuit and minimize external components, the
device integrates a stable high-sensitivity Hall effect sensor, voltage
and temperature compensated internal references, amplifiers and the
output H-bridge power switches with low RDSON.
To help protect the motor coil, the AH5775 provides Rotor Lock
Protection which shuts down the output drive if rotor lock is detected.
The device automatically re-starts when the rotor lock is removed. In
case of overvoltage, the device shuts down the output drive and
enters standby mode to help prevent overvoltage stress on the coil.
Over-temperature shutdown provides thermal protection for the
device.
1. VDD
2. O1
3. O2
4. GND
1 234
TO94
The AH5775 is available in TO94 package.
Features
• Supports single-phase full wave BLDC fan/motor drive
• Built-in Hall effect sensor and input amplifier
• Operating voltage: 2.5V to 18V
• Soft switching for low noise DC fan motor applications
• Rotor Lock Protection (Lock detection, output shutdown and
automatic restart)
• Overvoltage shutdown
• Thermal protection
• No external timing capacitor - Reduces the numbers of external
components required
• Industry Standard TO94 Package
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
Applications
• 5V / 12V / 15V Min. BLDC Cooling Fans
• Netbook/ Notebook and Desktop BLDC fans
• Instruments Cooling Fans
• Medium Voltage/ Low Power BLDC Motors
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
AH5775
Document number: DS38232 Rev. 1 - 2
1 of 12
www.diodes.com
December 2015
© Diodes Incorporated
1 Page AH5775
Absolute Maximum Ratings (Notes 5 & 6) (@TA = +25°C, unless otherwise specified.)
Symbol
VDD_MAX
VREVERSE
IO(CONT)
IO(HOLD)
IO(PEAK)
B
Characteristics
Maximum Supply Voltage (Note 6)
Reverse Supply Voltage on All Pins
Maximum Continuous Output Current
Maximum Output Current (Hold) - Motor Lock Condition
Maximum Output Current (Peak)
Maximum Magnetic Flux Density
Values
24
-0.3
300
500
800
Unlimited
Unit
V
V
mA
mA
mA
–
PD
TSTG
TJ
JA
JC
ESD HBM
Power Dissipation
Storage Temperature Range
Maximum Junction Temperature
Thermal Resistance Junction-to-Ambient
TO94
Thermal Resistance Junction-to-Case
Human Body Model ESD Capability
VDD, O1, O2 and GND pins
1,500
-65 to +150
+150
86.3
8.25
4
mW
°C
°C
°C/W
°C/W
kV
Notes:
5. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These are stress ratings only;
functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device reliability may
be affected by exposure to absolute maximum rating conditions for extended periods of time.
6. The absolute maximum VDD of 24V is a transient stress rating and is not meant as a functional operating condition. It is not recommended to operate
the device at the absolute maximum rated conditions for any period of time.
Recommended Operating Conditions
Symbol
VDD
TA
Characteristic
Supply Voltage
Operating Temperature Range
Operating
Operating
Conditions
Min Max Unit
2.5 18 V
-40
+105
°C
Electrical Characteristics (Note 7) (@TA = +25°C, VDD = 12V, unless otherwise specified.)
Symbol
Characteristics
Conditions
Min
Typ.
Max Unit
IDD Supply Current
No Load, PWM switching or high
– 3. 4.5 mA
VOV_TH
Overvoltage Protection Threshold for
shutdown to standby mode
Voltage increasing
19 21 23 V
VOV_RLTH Overvoltage Release Threshold
Voltage decreasing
VDD = 12V , IOUT = 300mA
18 20
VDD -0.35 VDD -0.25
22
–
V
VOH Output Voltage High
VDD = 12V , IOUT = 300mA
TA = -40°C to +105°C
VDD = 3V, IOUT = 200mA
VDD -0.45 VDD -0.25
VDD -0.31 VDD -0.2
–
–
V
V
VOL Output Voltage Low
VDD = 3V, IOUT = 200mA
TA = -40°C to +105°C
VDD = 12V, IOUT = 300mA
VDD =12V , IOUT = 300mA
TA = -40°C to +105°C
VDD = 3V, IOUT = 200mA
VDD =3V, IOUT = 200mA
TA = -40°C to +105°C
VDD -0.35
–
–
–
–
VDD -0.2
0.2
0.2
0.15
0.15
–
0.25
0.3
0.18
0.22
V
V
V
V
V
Note:
7. Typical data is measured at TA = +25°C, VDD = 12V. The maximum and minimum parameters values over operating temperature range are not tested in
production, they are guaranteed by design, characterization and process control.
AH5775
Document number: DS38232 Rev. 1 - 2
3 of 12
www.diodes.com
December 2015
© Diodes Incorporated
3Pages AH5775
Application Note
DC Supply Voltage Speed Control
Motor speed can be controlled by varying the VDD supply voltage. For example, with 12V nominal motor, changing supply voltage between 12V
to 2.5V, speed can be reduced from 100% to 20.8% typically.
Soft Switching
AH5775 uses soft switching of the motor coil current during commutation to minimize audible switching noise and electromagnetic interference
(EMI).
VDD
VO1
GND
VO2
200μs typ.
Overvoltage Shutdown of Output Drive
When the supply voltage reaches the overvoltage shutdown threshold, VOV_TH, the AH5775 shuts down all the output drive switches and enters
standby mode to help prevent overvoltage stress on the coil.
AH5775
Document number: DS38232 Rev. 1 - 2
6 of 12
www.diodes.com
December 2015
© Diodes Incorporated
6 Page | |||
ページ | 合計 : 12 ページ | ||
|
PDF ダウンロード | [ AH5775 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
AH5771 | SINGLE PHASE HALL EFFECT LATCH SMART FAN | Diodes Incorporated |
AH5772 | SINGLE PHASE MOTOR DRIVER | Diodes |
AH5773 | SINGLE PHASE MOTOR DRIVER | Diodes |
AH5775 | SINGLE PHASE MOTOR DRIVER | Diodes |