DataSheet.jp

1N6271A PDF Data sheet ( 特性 )

部品番号 1N6271A
部品説明 TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR
メーカ General Semiconductor
ロゴ General Semiconductor ロゴ 



Total 6 pages
		

No Preview Available !

1N6271A Datasheet, 1N6271A PDF,ピン配置, 機能
1.5KE6.8 THRU 1.5KE440CA
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR
Breakdown Voltage - 6.8 to 440 Volts Peak Pulse Power - 1500 Watts
Case Style 1.5KE
0.210 (5.3)
0.190 (4.8)
DIA.
1.0 (25.4)
MIN.
0.375 (9.5)
0.285 (7.2)
0.042 (1.07)
0.038 (0.96)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Glass passivated junction
1500W peak pulse power
capability on 10/1000µs waveform
repetition rate (duty cycle): 0.05%
Excellent clamping capability
Low incremental surge resistance
Fast response time: typically less
than 1.0ps from 0 Volts to V(BR) for uni-directional
and 5.0ns for bi-directional types
For devices with V(BR) >10V, ID are typically less
than 1.0µA
High temperature soldering guaranteed:
265°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3 kg) tension
Includes 1N6267 thru 1N6303
MECHANICAL DATA
Case: Molded plastic body over passivated junction
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes positive end (cathode) except
for bi-directional
Mounting Position: Any
Weight: 0.045 ounce, 1.2 grams
DEVICES FOR BI-DIRECTIONAL APPLICATIONS
For bidirectional use C or CA suffix for types 1.5KE6.8 thru types 1.5KE440A (e.g. 1.5KE6.8C, 1.5KE440CA).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Peak pulse power dissipation with a 10/1000µs
waveform (NOTE 1, Fig. 1)
Peak pulse current with a 10/1000µs waveform
(NOTE 1)
Steady state power dissipation at TL=75°C
lead lengths, 0.375" (9.5mm) (NOTE 2)
Peak forward surge current, 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
unidirectional only (NOTE 3)
Maximum instantaneous forward voltage at 100A for
unidirectional only (NOTE 4)
Operating junction and storage temperature range
SYMBOL
PPPM
IPPM
PM(AV)
IFSM
VF
TJ, TSTG
NOTES:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2
(2) Mounted on copper pad area of 1.6 x 1.6” (40 x 40mm) per Fig. 5
(3) Measured on 8.3ms single half sine-wave or equivalent square wave duty cycle=4 pulses per minute maximum
(4) VF=3.5V for devices of V(BR)220V and VF=5.0 Volt max. for devices of V(BR)>220V
VALUE
Minimum 1500
SEE TABLE 1
6.5
200
3.5/5.0
-55 to +175
1/21/99
UNITS
Watts
Amps
Watts
Amps
Volts
°C

1 Page





ページ 合計 : 6 ページ
PDF
ダウンロード
[ 1N6271A.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
1N6271

TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR

General Semiconductor
General Semiconductor
1N6271

TRANSIENT ABSORPTION ZENER

Microsemi Corporation
Microsemi Corporation
1N6271

TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR

Dc Components
Dc Components
1N6271

TRANSIENT VOLTAGE SUPPRESSOR

EIC discrete Semiconductors
EIC discrete Semiconductors

www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap