|
|
MGA-61563のメーカーはAVAGOです、この部品の機能は「Low Noise Amplifier」です。 |
部品番号 | MGA-61563 |
| |
部品説明 | Low Noise Amplifier | ||
メーカ | AVAGO | ||
ロゴ | |||
このページの下部にプレビューとMGA-61563ダウンロード(pdfファイル)リンクがあります。 Total 19 pages
MGA-61563
Current-Adjustable, Low Noise Amplifier
Data Sheet
Description
Avago Technologies' MGA-61563 is an economical,
easy-to-use GaAs MMIC amplifier that offers excellent
linearity and low noise figure for applications from 0.1
to 6 GHz. Packaged in an miniature SOT-363 package, it
requires half the board space of a SOT-143 package.
One external resistor is used to set the bias current
taken by the device over a wide range. This allows the
designer to use the same part in several circuit posi-
tions and tailor the linearity performance (and current
consumption) to suit each position. The MGA-61563 is
normally operating with Id set in the 20-60mA range
The output of the amplifier is matched to 50Ω (below
2:1 VSWR) across the entire bandwidth and only requires
minimum input matching. The amplifier allows a wide
dynamic range by offering a 1.2 dB NF coupled with a
+28.5 dBm Output IP3. The circuit uses state-of-the-art
E-pHEMT technology with proven reliability. On-chip
bias circuitry allows operation from a single +3V or +5V
power supply, while internal feedback ensures stability
(K>1) over all frequencies.
Pin Connections and Package Marking
Features
Single +3V or + 5V supply
High linearity
Low noise figure
Miniature SOT363 (SC70) package
Unconditionally stable
Lead-free option available
Specifications at 2 GHz; 3V, 41 mA (Typ.)
28.5 dBm OIP3
1.2 dB noise figure
16.6 dB gain
15.8 dBm P
1dB
Package Diagram
GND 1
GND 2
6
OUTPUT
and Vd
5 GND
INPUT 3
4 BIAS
Note:
Package marking provides orientation and identification:
“6A” = Device Code
“x” = Date code indicates the month of manufacture.
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model (Class A)
ESD Human Body Model (Class 0)
Refer to Avago Technologies Application Note A004R:
Electrostatic Discharge Damage and Control.
1 Page Product Consistency Distribution Charts at 3V, 2 GHz, R =620Ω[1,2]
bias
150
Cpk=5.7
stdev=0.03
120
90
+3 std
60
30
0
1 1.1 1.2 1.3
NF (dB)
Figure 2. NF @ 2 GHz 3V 40 mA.
USL=1.8, Nominal=1.17.
1.4
150
Cpk=1.3
stdev=0.36
120
90
-3 std
60
+3 std
30
0
14 15 16 17 18
GAIN (dB)
Figure 3. Gain @ 2 GHz 3V 40 mA.
USL=18, LSL=15, Nominal=16.6.
19
60
Cpk=1.6
stdev=0.50
50
40
30 -3 std
20
10
0
26 27
28 29
OIP3(dBm)
30
Figure 4. OIP3 @ 2 GHz 3V 40 mA.
LSL=26, Nominal=28.5.
31
100
Cpk=2.59
stdev=0.91
80
60
-3 std
+3 std
40
20
0
32 36 40 44
Id (mA)
Figure 5. Id @ 3V.
LSL=32, USL=48, Nominal=41.0.
48
2200
2000
1800
1600
1400
1200
1000
800
600
400
200
0
0 10 20 30 40 50 60 70 80 90
Id (mA)
Figure 6. Rbias vs. Id (3V supply).
5500
5000
4500
4000
3500
3000
2500
2000
1500
1000
500
0
0 10 20 30 40 50 60 70 80 90
Id (mA)
Figure 7. Rbias vs. Id (5V supply).
Note:
1. Measured on the production test circuit
2. Distribution data sample size is 250 samples taken from 5 different wafers. Future wafers allocated to this product may have nominal values
anywhere between upper and lower limits.
3
3Pages MGA-61563 Typical Performance, V = 3V, I = 20 mA at 50Ω Input and Output
d ds
25
25C
20 -40C
85C
15
10
3
25C
2.5 -40C
85C
2
1.5
1
5 0.5
0
0 1000 2000 3000 4000 5000 6000
FREQUENCY (GHz)
Figure 12. S21 vs. Freq (3V 20 mA).
0
0 1000 2000 3000 4000 5000 6000
FREQUENCY (GHz)
Figure 13. NF vs. Frequency (3V 20 mA).
28
25C
26 -40C
85C
24
22
20
18
0 1000 2000 3000 4000 5000 6000
FREQUENCY (GHz)
Figure 14. OIP3 vs. Frequency (3V 20 mA).
20
25 C
18 -40 C
85 C
16
14
12
10
0 1000 2000 3000 4000 5000 6000
FREQUENCY (GHz)
Figure 15. OP1dB vs. Frequency (3V 20 mA).
6
6 Page | |||
ページ | 合計 : 19 ページ | ||
|
PDF ダウンロード | [ MGA-61563 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
MGA-61563 | Low Noise Amplifier | Agilent Technologies |
MGA-61563 | Low Noise Amplifier | AVAGO |