DataSheet.jp

EKXJ251E PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 EKXJ251E
部品説明 MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
メーカ Chemi
ロゴ Chemi ロゴ 

Total 4 pages
		

No Preview Available !

EKXJ251E Datasheet, EKXJ251E PDF,ピン配置, 機能
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
160 to 500Vdc, long life, 105
KXJSeries
Downsized and Longer life from current KXG series
Endurance with ripple current : 8,000 to 12,000 hours at 105
Rated voltage range : 160 to 500V, Capacitance range : 6.8 to 680µF
For electronic ballast circuits and other long life applications
Non solvent resistant type
RoHS Compliant
KXJ
Downsized
KXG P183
SPECIFICATIONS
Items
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tan )
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Characteristics
–40 to +105(160 to 450Vdc) -25 to +105(500Vdc)
160 to 500Vdc
±20% (M)
(at 20, 120Hz)
After 1 minute
After 5 minutes
CV1000
I=0.1CV+40
I=0.03CV+15
CV>1000
I=0.04CV+100
I=0.02CV+25
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20)
Rated voltage (Vdc)
160 to 250V
350 to 500V
tanδ (Max.)
0.20 0.24
(at 20, 120Hz)
Rated voltage (Vdc)
160 to 250V
350, 400V
420 to 500V
Z(25)/Z(+20)
3
5
6
Z(40)/Z(+20)
6
6
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20after subjected to DC voltage with the rated
ripple current is applied(the peak voltage shall not exceed the rated voltage) for the specified time at 105.
Rated voltage (Vdc)
160 to 450V
500V
Time
16L to 20L10,000hours, 25L to 50L12,000hours φ108,000hours, φ12.5 to φ1810.000hours
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
200of the initial specified value
Leakage current
The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20after exposing them for 1,000 hours at 105without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
200% of the initial specified value
Leakage current
500% of the initial specified value
DIMENSIONS [mm]
Terminal Code : E
Sleeve (PET : Brown)
V ent
L'
15min.
4min.
(φ10)
(φ12.5 toφ18)
Gas escaped end seal
PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E KX J AAA E AA AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 6.8µF:6R8,10µF:100,100µF:101)
Lead forming·taping code
T erminal code
Voltage code (ex. 160V:161,400V:401)
Series code
Category
Please refer to "Product code guide (radial lead type)"
φD 10 12.5 14.5 16
φd 0.6 0.6 0.8 0.8
F 5.0 5.0 7.5 7.5
φD' φD+0.5max.
L' L+1.5max.
18
0.8
7.5
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
179 CAT. No. E1001P

1 Page





ページ 合計 : 4 ページ
PDF
ダウンロード
[ EKXJ251E.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
EKXJ251E

There is a function of MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS.

Chemi
Chemi

多くを見つけるデータシート

部品番号部品説明メーカ
82S129

The 82S126 and 82S129 are field programmable, which means that custom patterns are immediately available by following the Signetics Generic fusing procedure. 1K-bit TTL Bipolar PROM, Address access time : 50ns max.

NXP
NXP
D1695

This part is a darlington connection NPN silicon epitaxial transistor. The 2SD1695 is a Darlington connection transistor and incorporates a dumper diode between the collector and emitter and a constant voltage diode and protection elements between the collector and base. This transistor is ideal for drives in solenoid and actuators.

NEC
NEC

www.DataSheet.jp    |   2018   |  メール    |   最新    |   Sitemap