|
|
PDF CPT112S Data sheet ( Hoja de datos )
| Número de pieza | CPT112S | |
| Descripción | TouchXpress Family | |
| Fabricantes | Silicon Laboratories | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CPT112S (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
TouchXpress™ Family
CPT112S Data Sheet
The CPT112S device, part of the TouchXpress family, is designed
to quickly add capacitive touch via an I2C interface by eliminating
the firmware complexity and reducing the development time for ca-
pacitive sensing applications.
Supporting up to 12 capacitive sensor inputs in a 3 mm x 3 mm QFN package, the
CPT112S is a highly-integrated device that interfaces via I2C to the host processor to
provide a simple solution for adding capacitive touch. The device also comes with ad-
vanced features like moisture immunity, wake-on proximity, and buzzer feedback for an
enhanced user experience. No firmware development is needed, and all the capacitive
touch sense parameters can be configured using a simple GUI-based configurator. By
eliminating the need for complex firmware development, the CPT112S device enables
rapid user interface designs with minimal development effort.
The CPT112S device is ideal for a wide range of capacitive touch applications including
the following:
• Home appliances
• Instrument / Control panels
• White goods
• Medical equipment
• Consumer electronics
• Lighting control
KEY FEATURES
• No firmware development required
• Simple GUI-based configurator
• 12 Capacitive Sensor inputs with
programmable sensitivity
• Configurable multi-button slider
• I2C interface to communicate to the host
• Lowest power capacitive sense solution
• Active — 200 µA
• Sleep — 1 µA
• Wake on proximity
• Superior noise immunity: SNR up to 270:1
• Moisture immunity
• Mutually-exclusive touch qualifier
• Button touch time-out to avoid false
touches
• Buzzer output for audible touch feedback
Input
Features
Capacitive Touch Sensing
Features
Proximity Wake
Input
Touch
Qualification
Mutually-
Exclusive Touch
Qualifier
Option for a
Multi-Button
Slider
Configuration
Profile for each
Input
Baselining
Input Engine
with
12 Inputs
Low Power State Touch Time-Out
Machine
Timer
Lowest power mode with feature operational:
Active
Optimized Active
Low Power Sleep
Output
Features
I2C Output
I2C Event Buffer
Interrupt Pin
Optional Buzzer
Output
silabs.com | Smart. Connected. Energy-friendly.
This information applies to a product under development. Its characteristics and specifications are subject to change without notice.
Preliminary Rev. 0.1
1 page  
3. Electrical Specifications
CPT112S Data Sheet
Electrical Specifications
3.1 Electrical Characteristics
All electrical parameters in all tables are specified under the conditions listed in Table 3.1 Recommended Operating Conditions on page
4, unless stated otherwise.
3.1.1 Recommended Operating Conditions
Table 3.1. Recommended Operating Conditions
Parameter
Symbol
Operating Supply Voltage on VDD VDD
Minimum RAM Data Retention
Voltage on VDD1
VRAM
Operating Ambient Temperature TA
Note:
1. All voltages with respect to GND.
Test Condition
Not in Sleep Mode
Sleep Mode
Min Typ Max Unit
1.8 2.4 3.6
V
— 1.4 —
V
— 0.3 0.5 V
–40 — 85 °C
silabs.com | Smart. Connected. Energy-friendly.
Preliminary Rev. 0.1 | 4
5 Page 
3.4 Typical Performance Curves
CPT112S Data Sheet
Electrical Specifications
Figure 3.1. Active Mode Processing Time Per Sensor
Note: Active mode processing time per sensor measured with sensors configured to 1x accumulation, 8x gain. Sensor sampling and
system processing time is included with mutually-exclusive buttons, the buzzer, slider, and touch time-outs disabled.
Figure 3.2. Current vs. Active Mode Scan Period — Base Current Consumption
silabs.com | Smart. Connected. Energy-friendly.
Preliminary Rev. 0.1 | 10
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet CPT112S.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CPT112S | TouchXpress Family | Silicon Laboratories |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |