|
|
AH9251のメーカーはDiodesです、この部品の機能は「MEDIUM SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH」です。 |
部品番号 | AH9251 |
| |
部品説明 | MEDIUM SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH | ||
メーカ | Diodes | ||
ロゴ | |||
このページの下部にプレビューとAH9251ダウンロード(pdfファイル)リンクがあります。 Total 10 pages
AH9251
MEDIUM SENSITIVITY MICROPOWER
OMNIPOLAR HALL-EFFECT SWITCH
Description
Pin Assignments
The AH9251 is a medium sensitivity Hall-effect switch with internal
pull-up resistor on the output, designed for battery operated handheld
equipments to industrial applications.
A chopper stabilized architecture improves stability of magnetic switch
points over the whole operating range. A sleep-awake logic controls
the sleep and awake time to reduce the average operating current of
the device. During the awake time, the output is changed with the
magnetic flux density. During the sleep time, the output is latched in
its previous state and the current consumption reduces to 4µA typical
at 3V. The average current consumption is 8µA at 3V.
The output can be switched on with either north or south pole of
sufficient strength. If the magnetic flux density perpendicular to the
part marking surface is larger than operating point (BOP), the output
will be turned on; if it is less than releasing point (BRP), the output will
be turned off.
The AH9251 is available in industry standard TO92S and SC59
packages.
(Front View)
3
2
1
TO92S
(Top View)
GND
3
OUTPUT
GND
VDD
Features
Omnipolar Operation (Switching with North or South Poles)
2.5V to 5.5V Power Supply
Micropower Operation
Built in Pull-up Resistor on the Output
Stabilized Chopper
Superior Temperature Stability
Digital Output Signal
-40°C to +85°C Operating Temperature
ESD (HBM): 5000V
Small Low Profile Industry Standard SC59 and TO92S Packages
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
12
VDD OUTPUT
SC59
Applications
Handheld Wireless Applications Proximity Detection Switches
Doors, Lids, Covers and Tray Position Detect Switches
Liquid Level Detection
Battery Powered Consumer, Home Appliances and Industrial
Applications
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
AH9251
Document number: DS38218 Rev.1 - 2
1 of 10
www.diodes.com
September 2015
© Diodes Incorporated
1 Page AH9251
Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.)
Symbol
VDD
IDD
VOUT
IOUT
B
PD
TSTG
TJ
–
–
Parameter
Supply Voltage (Note 5)
Supply Current (Fault)
Output Voltage
Output Current
Magnetic Flux Density
Power Dissipation
Storage Temperature
Junction Temperature
ESD (Human Body Model) (Note 6)
ESD (Machine Model) (Note 6)
Rating
7
6
7
2
Unlimited
TO92S
SC59
-55 to +150
+150
5000
400
230
230
Unit
V
mA
V
mA
Gauss
mW
C
C
V
V
Notes:
4. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These are stress ratings only;
functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device reliability may be
affected by exposure to absolute maximum rating conditions for extended periods of time.
5. The absolute maximum VDD of 7V is a transient stress rating and is not meant as a functional operating condition. It is not recommended to operate the
device at the absolute maximum rated conditions for any period of time.
6. Electronic semiconductor products are sensitive to Electro Static Discharge (ESD). Always observe Electro Static Discharge control procedures
whenever handling semiconductor products.
Recommended Operating Conditions
Symbol
VDD
TA
Characteristic
Supply Voltage
Operating Temperature Range
Operating
Operating
Conditions
Min Max Unit
2.5 5.5 V
-40 +85 °C
Electrical Characteristics (Note 7) (@TA = +25°C, VDD = 3V, unless otherwise specified.)
Symbol
VDD
IDD_AW
Characteristic
Supply Voltage
Supply Current During “Awake”
Period
Operating
Conditions
Min Typ Max Unit
2.5 3 5.5 V
TA = -40 to +85C, VDD = 2.5V to 5.5V
–
1.8
3
mA
IDD_SL
Supply Current During “Sleep” Period TA = -40 to +85C, VDD = 2.5V to 5.5V
–
4 10 µA
IDD_AVG
IOUT
IOFF
VOUT (SAT)
tAW
tSL
D
fC
Average Supply Current
Output Current
Output Leakage Current
Output Saturation Voltage
Awake Mode Time
Sleep Mode Time
Duty Cycle
Chopper Frequency
TA = -40 to +85C, VDD = 2.5V to 5.5V
–
8 15 µA
– – – 1.0 mA
VOUT = 5.5V, Output off
IOUT = 1.0mA, Output on
Operating
– <0.1 1
µA
– – 0.4 V
– 150 –
µs
Operating
– 100 – ms
–
– 0.15 –
%
– – 15 – kHz
Note:
7. Parameters values over operating temperature range are not tested in production, they are guaranteed by design, process control and characterization.
The magnetic characteristics may vary with supply voltage, operating temperature and after soldering.
AH9251
Document number: DS38218 Rev.1 - 2
3 of 10
www.diodes.com
September 2015
© Diodes Incorporated
3Pages AH9251
Thermal Performance
Power Dissipation De-rating Curve
(1) Package Types: SC59 and TO92S
TA (C) -40 0 25 50 60 70 80 85 90 100 110 120 130 140 150
PD (mW) 230 230 230 184 166 147 129 120 110
92
74
55
37
18
0
PD (mW)
300
Power Dissipation Curve
200
100
0
-400
25
8550 75 100 125 150
TA (oC)
Ordering Information
Product Name
Device
AH9251-P-B
AH9251-W-7
Package
Code
P
W
AH9251 - X - X
Package
P : TO92S
W : SC59
Packaging
TO92S
SC59
Packing
B : Bulk
7 : 7" Tape & Reel
Bulk
Quantity
1000/Bulk
NA
7” Tape and Reel
Quantity
NA
3000/Tape & Reel
AH9251
Document number: DS38218 Rev.1 - 2
6 of 10
www.diodes.com
September 2015
© Diodes Incorporated
6 Page | |||
ページ | 合計 : 10 ページ | ||
|
PDF ダウンロード | [ AH9251 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
AH9250 | HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH | Diodes |
AH9251 | MEDIUM SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH | Diodes |