DataSheet.jp

BB175 の電気的特性と機能

BB175のメーカーはNXP Semiconductorsです、この部品の機能は「VHF variable capacitance diode」です。


製品の詳細 ( Datasheet PDF )

部品番号 BB175
部品説明 VHF variable capacitance diode
メーカ NXP Semiconductors
ロゴ NXP Semiconductors ロゴ 




このページの下部にプレビューとBB175ダウンロード(pdfファイル)リンクがあります。

Total 8 pages

No Preview Available !

BB175 Datasheet, BB175 PDF,ピン配置, 機能
BB175
VHF variable capacitance diode
Rev. 1 — 25 March 2013
Product data sheet
1. Product profile
1.1 General description
The BB175 is a variable capacitance diode, fabricated in planar technology, and
encapsulated in the SOD523 (SC-79) ultra small SMD plastic package.
1.2 Features and benefits
High linearity
Ultra small SMD plastic package
Cd(28V) = 2.7 pF; Cd(1V) to Cd(28V) ratio = 22
Low series resistance
1.3 Applications
Voltage Controlled Oscillators (VCO)
2. Pinning information
Table 1.
Pin
1
2
Pinning
Description
cathode
anode
[1] The marking bar indicates the cathode.
3. Ordering information
Simplified outline
[1]
12
Symbol
sym008
Table 2. Ordering information
Type number
Package
Name
Description
BB175
SC-79
plastic surface-mounted package; 2 leads
Version
SOD523

1 Page





BB175 pdf, ピン配列
NXP Semiconductors
BB175
VHF variable capacitance diode
80
Cd
(pF)
60
40
20
0
101
1
10
f = 1 MHz; Tj = 25 C.
Fig 1. Diode capacitance as a function of reverse voltage; typical values.
103
IR
(nA)
102
001aae541
102
TCCd
(K1)
103
mbk439
VR (V)
102
001aag774
10 104
1
0 20 40 60 80 100
Tj (°C)
Fig 2. Reverse current as a function of junction
temperature; maximum values.
105
101
1
10 102
VR (V)
Fig 3.
Tj = 0 C to 85 C.
Diode capacitance temperature coefficient as a
function of reverse voltage; typical values.
BB175
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 25 March 2013
© NXP B.V. 2013. All rights reserved.
3 of 8


3Pages


BB175 電子部品, 半導体
NXP Semiconductors
BB175
VHF variable capacitance diode
10. Legal information
10.1 Data sheet status
Document status[1][2]
Objective [short] data sheet
Preliminary [short] data sheet
Product [short] data sheet
Product status[3]
Development
Qualification
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
10.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
10.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
BB175
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 25 March 2013
© NXP B.V. 2013. All rights reserved.
6 of 8

6 Page



ページ 合計 : 8 ページ
 
PDF
ダウンロード
[ BB175 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
BB170

VHF variable capacitance diode

NXP Semiconductors
NXP Semiconductors
BB171

VHF variable capacitance diode

NXP Semiconductors
NXP Semiconductors
BB172

VHF variable capacitance diode

NXP Semiconductors
NXP Semiconductors
BB173

VHF variable capacitance diode

NXP Semiconductors
NXP Semiconductors


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap