DataSheet.jp

IKCM10B60GA の電気的特性と機能

IKCM10B60GAのメーカーはInfineonです、この部品の機能は「Control Integrated POwer System」です。


製品の詳細 ( Datasheet PDF )

部品番号 IKCM10B60GA
部品説明 Control Integrated POwer System
メーカ Infineon
ロゴ Infineon ロゴ 




このページの下部にプレビューとIKCM10B60GAダウンロード(pdfファイル)リンクがあります。

Total 17 pages

No Preview Available !

IKCM10B60GA Datasheet, IKCM10B60GA PDF,ピン配置, 機能
Control Integrated POwer System
(CIPOS™)
IKCM10B60GA
Datasheet
Datasheet
www.infineon.com
Please read the Important Notice and Warnings at the end of this document
<Revision 2.1>
<2016-08-01>

1 Page





IKCM10B60GA pdf, ピン配列
Control Integrated POwer System (CIPOS™)
IKCM10B60GA
CIPOS
Control Integrated POwer System
Dual In-Line Intelligent Power Module
3Φ -bridge 600V / 10A, Single Phase Diode Bridge Rectifier
Features
Fully isolated Dual In-Line molded module
TRENCHSTOPIGBTs
Optimized diodes for single phase diode bridge
rectifier
Rugged SOI gate driver technology with stability
against transient and negative voltage
Allowable negative VS potential up to -11V for
signal transmission at VBS=15V
Integrated bootstrap functionality
Over current shutdown
Temperature monitor
Under-voltage lockout at all channels
Low side common emitter
Cross-conduction prevention
All of 6 switches turn off during protection
Lead-free terminal plating; RoHS compliant
Target Applications
Washing machines
Fans
Low power motor drives
Description
The CIPOSmodule family offers the chance for
integrating various power and control components
to increase reliability, optimize PCB size and system
costs.
It is designed to control three phase AC motors and
permanent magnet motors in variable speed drives
for applications like a washing machine. The
package concept is specially adapted to power
applications, which need good thermal conduction
and electrical isolation, but also EMI-save control
and overload protection.
TRENCHSTOPIGBTs and anti parallel diodes are
combined with an optimized SOI gate driver for
excellent electrical performance.
System Configuration
3 half bridges with TRENCHSTOPIGBTs and
anti parallel diodes
Single phase diode bridge rectifier
3Φ SOI gate driver
Thermistor
Pin-to-heatsink clearance distance typ. 1.6mm
Datasheet
3 <Revision 2.1>
<2016-08-01>


3Pages


IKCM10B60GA 電子部品, 半導体
Control Integrated POwer System (CIPOS™)
IKCM10B60GA
It is not recommended for proper work to provide
input pulse-width lower than 0.5µs.
The integrated gate drive provides additionally a
shoot through prevention capability which avoids
the simultaneous on-state of two gate drivers of the
same leg (i.e. HO1 and LO1, HO2 and LO2, HO3 and
LO3). When two inputs of a same leg are activated,
only former activated one is activated so that the
leg is kept steadily in a safe state.
The under-voltage circuit enables the device to
operate at power on when a supply voltage of at
least a typical voltage of VDDUV+ = 12.1V is present.
The IC shuts down all the gate drivers power
outputs, when the VDD supply voltage is below
VDDUV- = 10.4V. This prevents the external power
switches from critically low gate voltage levels
during on-state and therefore from excessive power
dissipation.
A minimum deadtime insertion of typically 380ns is
also provided by driver IC, in order to reduce cross-
conduction of the external power switches.
VFO (Fault-output and NTC, Pin 14)
The VFO pin indicates a module failure in case of
under voltage at pin VDD or in case of triggered
over current detection at ITRIP. A pull-up resistor is
externally required.
VB(U, V, W) and VS(U, V, W) (High side supplies, Pin
1 - 6)
VB to VS is the high side supply voltage. The high
side circuit can float with respect to VSS following
the external high side power device emitter voltage.
Due to the low power consumption, the floating
driver stage is supplied by integrated bootstrap
circuit.
VDD
CIPOSTM
VFO
RON,FLT
From ITRIP - Latch
1
VSS
Thermistor
From UV detection
Figure 5 Internal circuit at pin VFO
The same pin provides direct access to the NTC,
which is referenced to VSS. An external pull-up
resistor connected to +5V ensures that the resulting
voltage can be directly connected to the
microcontroller.
ITRIP (Over current detection function, Pin 15)
CIPOSprovides an over current detection
function by connecting the ITRIP input with the
IGBT collector current feedback. The ITRIP
comparator threshold (typ. 0.47V) is referenced to
VSS ground. An input noise filter (typ.: tITRIPMIN =
530ns) prevents the driver to detect false over-
current events.
Over current detection generates a shutdown of all
outputs of the gate driver after the shutdown
propagation delay of typically 1000ns.
The fault-clear time is set to minimum 40µs.
The under-voltage detection operates with a rising
supply threshold of typical VBSUV+ = 12.1V and a
falling threshold of VBSUV- = 10.4V.
VS(U, V, W) provide a high robustness against
negative voltage in respect of VSS of -50V
transiently. This ensures very stable designs even
under rough conditions.
N (Low side common emitter, Pin 17)
The low side common emitter is available for
current measurements. It is recommended to keep
the connection to pin VSS as short as possible in
order to avoid unnecessary inductive voltage drops.
W, V, U (High side emitter and low side collector,
Pin 18 - 20)
These pins are motor U, V, W input pins.
P, NR (Positive bus input voltage and negative bus
voltage, Pin 21, 24)
The high side IGBTs are connected to the bus
voltage. It is noted that the bus voltage does not
exceed 450V. The bus voltage is referenced to NR
ground.
R, S (Single phase diode bridge rectifier input pins,
Pin 22, 23)
VDD, VSS (Low side control supply and reference,
Pin 13, 16)
Rectifier input pins for connecting to the grid line.
VDD is the control supply and it provides power
both to input logic and to output power stage.
Input logic is referenced to VSS ground.
Datasheet
6 <Revision 2.1>
<2016-08-01>

6 Page



ページ 合計 : 17 ページ
 
PDF
ダウンロード
[ IKCM10B60GA データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
IKCM10B60GA

Control Integrated POwer System

Infineon
Infineon


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap