DataSheet.es    


PDF ADNS-2620 Data sheet ( Hoja de datos )

Número de pieza ADNS-2620
Descripción Optical Mouse Sensor
Fabricantes Avago 
Logotipo Avago Logotipo



Hay una vista previa y un enlace de descarga de ADNS-2620 (archivo pdf) en la parte inferior de esta página.


Total 27 Páginas

No Preview Available ! ADNS-2620 Hoja de datos, Descripción, Manual

ADNS-2620
Optical Mouse Sensor
Data Sheet
Description
The ADNS-2620 is a new entry level, small form ­ factor
optical mouse sensor. It is used to implement a non-
mechanical tracking engine for computer mice. ­ Unlike
its predecessor, this new optical mouse sensor allows for
more compact and affordable optical mice designs.
It is based on optical navigation technology, which mea-
sures changes in position by optically acquiring sequential
surface images (frames) and mathematically determining
the direction and ­magnitude of movement.
The sensor is housed in an 8-pin staggered dual
inline package (DIP). It is designed for use with the
HDNS-2100 Lens, HLMP-ED80-xx000, and the
HDNS-2200 LED Clip, providing an optical mouse solu-
tion that is compact and affordable. There are no moving
parts, so precision optical alignment is not required,
thereby facilitating high volume assembly.
The output format is a two wire serial port. The ­current X
and Y information are available in ­registers accessed via
the serial port.
Resolution is 400 counts per inch (cpi) with rates of
motion up to 12 inches per second (ips).
Theory of Operation
The ADNS-2620 is based on Optical Navigation
­Technology. It contains an Image Acquisition System
(IAS), a Digital Signal Processor (DSP) and a two wire
serial port.
The IAS acquires microscopic surface images via
the lens and illumination system provided by the
HDNS-2100, HDNS-2200, and HLMP-ED80-xx000. These
images are processed by the DSP to determine the direc-
tion and distance of motion.
Features
Precise optical navigation technology
Small form factor
(10 mm x 12.5 mm footprint)
No mechanical moving parts
Complete 2D motion sensor
Common interface for general purpose controller
Smooth surface navigation
Programmable frame speed up to 3000 frames per
sec (fps)
Accurate motion up to 12 ips
400 cpi resolution
High reliability
High speed motion detector
Wave solderable
Single 5.0 volt power supply
Conforms to USB suspend mode specifications
Power conservation mode during times of no move-
ment
Serial port registers
– Programming
– Data transfer
8-pin staggered dual inline package (DIP)
Applications
Mice for desktop PC’s, ­workstations, and portable PC’s
Trackballs
Integrated input devices

1 page




ADNS-2620 pdf
VDD
D+
D-
GND
SHLD
0.1 µF
1.3 K
GND QA
7 Vpp
13 D+
12 D-
8 Vreg
5 P1.0
11
VDD
4.7 µF
0.1 µF
P0.5 17
P0.6 16
7
VDD
6 GND
3 SDIO
Internal
Image
Sensor
LED_CNTL
HDNS
2100 100K ohms
Lens
SURFACE
5 1K ohms
R1
HLMP-ED80-xx000
2N3906
OSC_IN 1
Ceramic Resonaator
VDD VDD QB 14 P1.1
R
Z LED
1 P0.0
P0.7 15
P0.3 4
L
P0.2 3
M
P0.1 2
R
Buttons
VSS 6
XTALOUT
10
XTALIN
9
6 MHz
(Optional)
4 SCK
OSC_OUT 2
REFA 8
HLMP-ED80
Bin
K
L
M
N
P
Q
R
S
T
R1 VALUE
(Ohms)
32.0
32.0
32.0
32.0
32.0 to 61.2
32.0 to 73.9
32.0 to 84.4
32.0 to 103
32.0 to 130
24 MHz
Murata CSALS24M0X53-B0
TDK FCR24.0M2G
2.2 µF
Figure 8. Circuit block diagram for a typical corded optical mouse using an Avago ADNS-2620 optical mouse sensor.
Notes on Bypass Capacitors
• Caps for pins 6,7 and 8 to ground MUST have trace
lengths LESS than 5 mm.
• The 0.1 uF caps must be ceramic.
• Caps should have less than 5 nH of self inductance
• Caps should have less than 0.2 ohms ESR
• Surface mount parts are recommended
Regulatory Requirements
• Passes FCC B and worldwide analogous emission limits
when assembled into a mouse with unshielded cable
and following Avago recommendations.
• Passes EN61000-4-4/IEC801-4 EFTB tests when assem-
bled into a mouse with shielded cable and following
Avago recommendations.
• UL flammability level UL94 V-0.
• Provides sufficient ESD creepage/clearance distance
to avoid discharge up to 15 kV when assembled into a
mouse according to usage instructions above.
• For eye safety consideration, please refer to the tech-
nical report available on the web site at www.Avago.
com/semiconductors.


5 Page





ADNS-2620 arduino
Typical Performance Characteristics
Performance characteristics over recommended operating conditions. Typical values at 25°C, VDD = 5 V, 24 MHz, 1500 fps.
Parameter
Symbol Min. Typ. Max. Units Notes
P ath Error (De viation) PError 0.5 %
Path Error (Deviation) is the error from the ideal cursor path. It is expressed
as a percentage of total travel and is measured over standard surfaces.
The following graphs (Figures 14-18) are the typical performance of the ADNS-2620 sensor, assembled as shown in
the 2D assembly drawing with the HDNS-2100 Lens/Prism, the HDNS-2200 clip, and the HLMP-ED80-xx000 (See Figure
4).
500
400
300
200
Burl Formica
100
White Paper
Manila
Black Copy
Black Walnut
0
-1 -0.8 -0.6 -0.4 -0.2 -0 0.2 0.4 0.6 0.8 1
z (mm)
Figure 14. Typical Resolution vs. Z
(comparative surfaces)
500
400
300
200
White Paper
100
Manila
Black Copy
0
1 3 5 7 9 11 13 15
VELOCITY (ips)
Figure 15. Typical Resolution vs. Velocity @
1500 fps.
1.0
0.8
0.6
0.4
0.2
0
400 500 600 700 800 900 1000
WAVELENGTH (nm)
Figure 16. Wavelength Responsivity[1].
500
400
300
200
100%
100
75%
50%
0
-1 -0.6 -0.2 0.2 0.6 1
z (mm)
Figure 17. Typical Resolution vs. Height at
different LED currents on manila.
600
100%
500 75%
50%
400
300
200
100
0
-1 -0.6 -0.2 0.2 0.6 1
z (mm)
Figure 18. Typical Resolution vs. Height at
different LED currents on black.
Notes:
1. The ADNS-2620 is designed for optimal
performance when used with the
HLMP-ED80-xx000 (red LED 639 nm). For
use with other LED colors (i.e., blue, green),
please consult factory. When using alter-
nate LEDs, there may also be performance
degradation and additional eye safety
considerations.
2. Z = Distance from Lens Reference plane to
Surface.
3. DOF = Depth of Field.
11

11 Page







PáginasTotal 27 Páginas
PDF Descargar[ Datasheet ADNS-2620.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
ADNS-2620Optical Mouse SensorAgilent Technologies
Agilent Technologies
ADNS-2620Optical Mouse SensorAvago
Avago

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar