|
|
PIC16LF1614のメーカーはMicrochipです、この部品の機能は「8-Bit Flash Microcontroller」です。 |
部品番号 | PIC16LF1614 |
| |
部品説明 | 8-Bit Flash Microcontroller | ||
メーカ | Microchip | ||
ロゴ | |||
このページの下部にプレビューとPIC16LF1614ダウンロード(pdfファイル)リンクがあります。 Total 30 pages
PIC16(L)F1614/8
14/20-Pin, 8-Bit Flash Microcontroller
Description
PIC16(L)F1614/8 microcontrollers deliver on-chip features that are unique to the design for embedded control of small
motors and general purpose applications in 14/20-pin count packages. Features like 10-bit A/D, CCP, 24-bit SMT and
Zero-Cross Detection offer an excellent solution to the variety of applications. The product family also has a CRC+
memory scan and Windowed WDT to support safety-critical systems in home appliances, white goods and other end
equipment.
Core Features
• C Compiler Optimized RISC Architecture
• Only 49 Instructions
• Operating Speed:
- DC – 32 MHz clock input
- 125 ns minimum instruction cycle
• Interrupt Capability
• 16-Level Deep Hardware Stack
• One 8-Bit Timer
• Four 16-bit Timers
• Low Current Power-on Reset (POR)
• Configurable Power-up Timer (PWRT)
• Brown-out Reset (BOR) with Selectable Trip Point
• Windowed Watchdog Timer (WWDT):
- Variable prescaler selection
- Variable window size selection
- All sources configurable in hardware or
software
Memory
• 4 KW Flash Program Memory
• 512 Bytes Data SRAM Memory
• Direct, Indirect and Relative Addressing modes
• High-Endurance Flash Data Memory (HEF):
- 128 B (nonvolatile), 100K erase/write cycles
Operating Characteristics
• Operating Voltage Range:
- 1.8V to 3.6V (PIC16LF1614/8)
- 2.3V to 5.5V (PIC16F1614/8)
• Temperature Range:
- Industrial: -40°C to 85°C
- Extended: -40°C to 125°C
eXtreme Low-Power (XLP) Features
• Sleep mode: 50 nA @ 1.8V, typical
• Watchdog Timer: 500 nA @ 1.8V, typical
• Secondary Oscillator: 500 nA @ 32 kHz
• Operating Current:
- 8 uA @ 32 kHz, 1.8V, typical
- 32 uA/MHz @ 1.8V, typical
Digital Peripherals
• Configurable Logic Cell (CLC):
- Two CLCs
- Integrated combinational and sequential logic
• Complementary Waveform Generator (CWG):
- Rising and falling edge dead-band control
- Full-bridge, half-bridge, 1-channel drive
- Multiple signal sources
• Two Capture/Compare/PWM (CCP) modules
• PWM: Two 10-bit Pulse-Width Modulators
• Two Signal Measurement Timers (SMT):
- 24-bit timer/counter with prescaler
- Multiple gate and clock inputs
• Angular Timer:
- Single pulse
- Multiple pulses with missing pulse recovery
• 8-Bit Timers (TMR2+HLT/4/6):
- Up to 3 Timer2/4/6 with Hardware Limit Timer
(HLT)
- Monitors Fault Conditions: Stall, Stop, etc.
- Multiple modes
- 8-bit timer/counter with prescaler
- 8-bit period register and postscaler
- Asynchronous H/W Reset sources
• Math Accelerator with Proportional-Integral-
Derivative (PID):
- Four operation modes
- Add and multiply
- Simple multiplier
- Multiply and Accumulate
- Programmable PID controller
• Cyclic Redundancy Check with Memory Scan
(CRC/SCAN):
- Software configurable
• Serial Communications:
- Enhanced USART (EUSART)
- SPI, I2C™, RS-232, RS-485, LIN compatible
- Auto-Baud Detect, Auto-Wake-up on start
2014 Microchip Technology Inc.
Preliminary
DS40001769A-page 1
1 Page TABLE 1: PIC12/16(L)F161X FAMILY TYPES
Device
PIC12(L)F1612 (A) 2048 3.5 256 6 4 1 Y 1 1 4 1 2/0 1 0 Y 0 0 N 0 0
PIC16(L)F1613 (A) 2048 3.5 256 12 4 1 Y 2 2 8 1 2/0 1 0 Y 0 0 N 0 0
PIC16(L)F1614 (B) 4096 7
512 12 4 3 Y 2 2 8 1 2/2 1 2 Y 1 2 Y 1 1
PIC16(L)F1615 (C) 8192 14 1024 12 4 3 Y 2 2 8 1 2/2 1 4 Y 1 2 Y 1 1
PIC16(L)F1618 (B) 4096 7
512 18 4 3 Y 2 2 12 1 2/2 1 2 Y 1 2 Y 1 1
PIC16(L)F1619 (C) 8192 14 1024 18 4 3 Y 2 2 12 1 2/2 1 4 Y 1 2 Y 1 1
Note 1: Debugging Methods: (I) – Integrated on Chip; (H) – via ICD Header; E – using Emulation Product
Data Sheet Index:
A. DS40001737
PIC12(L)F1612/16(L)F1613 Data Sheet, 8/14-Pin, 8-bit Flash Microcontrollers
B. DS40001769
PIC16(L)F1614/8 Data Sheet, 14/20-Pin, 8-bit Flash Microcontrollers
C. DS40001770
PIC16(L)F1615/9 Data Sheet, 14/20-Pin, 8-bit Flash Microcontrollers
Note: For other small form-factor package availability and marking information, please visit
http://www.microchip.com/packaging or contact your local sales office.
3Pages PIN ALLOCATION TABLES
TABLE 3: 14/16-PIN ALLOCATION TABLE (PIC16(L)F1614)
I/O
RA0 13 12 AN0 DAC1OUT1 C1IN+
—
—
—
—
——
—
——
——
RA1 12
11 AN1
VREF+
C1IN0-
C2IN0-
—
—
—
— ——
— —— ——
RA2 11 10 AN2
—
— T0CKI(1) — CWG1IN(1) ZCD1IN
—
—
—
——
——
RA3
RA4
RA5
4
3
2
3—
2 AN3
1—
RC0
RC1
10
9
9 AN4
8 AN5
RC2
8
7 AN6
RC3
7
6 AN7
RC4
6
5—
RC5
5
4—
VDD 1 16 —
VSS 14 13 —
—
— T6IN(1)
—
—
— T1G(1)
—
—
— T1CKI(1)
—
T2IN(1)
—
C2IN+ T5CKI(1)
—
— C1IN1- T4IN(1) —
C2IN1-
—
C1IN2-
—
C2IN2-
—
— C1IN3- T5G(1) CCP2(1)
C2IN3-
—
— T3G(1)
—
— — T3CKI(1) CCP1(1)
— —— —
— —— —
—
—
—
—
—
—
—
—
—
—
—
—
—
— SMTWIN2(1) —
—
——
—
—
— SMTSIG1(1) —
—
——
—
—
— SMTWIN1(1) —
—
——
—
——
—
— SCK(1,3)
—
—
—
—
— SMTSIG2(1) —
SDI(1)
—
—
— ——
—
CLCIN0(1)
—
— —— ——
— ATCC(1) SS(1) — —
— CLCIN1(1) CK(1)
—
——
—
— RX(1,3)
—
ATIN(1)
—
— — — — ——
— — — — ——
— HIC4
— HIC5
——
——
———
—
C1OUT
—
CCP1
CWG1A ZCD1OUT CLC1OUT DT(3)
—
— SDO PWM3OUT —
OUT(2) — — —
—
C2OUT
—
CCP2
CWG1B
— CLC2OUT CK
—
— SCK(3) PWM4OUT —
———
—
——
— CWG1C
—
— TX
—
——
——
Note
———
—
——
— CWG1D
—
——
—
—
1: Default peripheral input. Input can be moved to any other pin with the PPS input selection registers.
2: All pin outputs default to PORT latch data. Any pin can be selected as a digital peripheral output with the PPS output selection registers.
3: These peripheral functions are bidirectional. The output pin selections must be the same as the input pin selections.
—
——
IOC
IOC
INT
IOC
IOC
IOC
IOC
IOC
IOC
IOC
IOC
IOC
IOC
—
—
—
—
—
—
Y ICSPDAT
Y ICSPCLK
Y—
Y MCLR/VPP
Y CLKOUT
Y CLKIN
Y—
Y—
Y—
Y—
Y—
Y—
— VDD
— VSS
——
——
——
——
6 Page | |||
ページ | 合計 : 30 ページ | ||
|
PDF ダウンロード | [ PIC16LF1614 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
PIC16LF1613 | 8-Bit Flash Microcontroller | Microchip |
PIC16LF1614 | 8-Bit Flash Microcontroller | Microchip |
PIC16LF1615 | 8-Bit Flash Microcontroller | Microchip |
PIC16LF1618 | 8-Bit Flash Microcontroller | Microchip |