DataSheet.jp

RB541SM-40 の電気的特性と機能

RB541SM-40のメーカーはROHM Semiconductorです、この部品の機能は「Schottky Barrier Diode」です。


製品の詳細 ( Datasheet PDF )

部品番号 RB541SM-40
部品説明 Schottky Barrier Diode
メーカ ROHM Semiconductor
ロゴ ROHM Semiconductor ロゴ 




このページの下部にプレビューとRB541SM-40ダウンロード(pdfファイル)リンクがあります。

Total 8 pages

No Preview Available !

RB541SM-40 Datasheet, RB541SM-40 PDF,ピン配置, 機能
Schottky Barrier Diode
RB541SM-40
Data Sheet
lApplication
Small current rectification
lDimensions (Unit : mm)
0.8±0.05
(1)
0.12±0.05
lLand Size Figure (Unit : mm)
0.8
lFeatures
1) Ultra small mold type
(EMD2)
2) High reliability
3) Super low VF
lConstruction
Silicon epitaxial planar type
(2)
0.3±0.05
ROHM : EMD2
JEDEC : SOD-523
0.6±0.1
JEITA : SC-79
: Year, week and factory
lTaping Dimensions (Unit : mm)
EMD2
lStructure (1) Cathode
(2) Anode
4.0±0.1 2.0±0.05
Φ1.55±0.05
0.2±0.05
0.35±0.03 0.90±0.03
4.0±0.1 2.0±0.05
Φ0.5±0.05
0.2
0.75±0.05
lAbsolute Maximum Ratings (Tc= 25°C)
Parameter
Symbol
Conditions
Limits Unit
Repetitive peak reverse voltage
VRM
Duty0.5
40 V
Reverse voltage
VR Direct reverse voltage
Average forward rectified current
Non-repetitive forward current surge peak
Io
IFSM
Glass epoxy board mounted, 60Hz half sin wave,
resistive load
60Hz half sin wave, Non-repetitive at
Ta=25ºC , 1cycle
Operating junction temperature
Tj
-
40
200
1
125
V
mA
A
°C
Storage temperature
Tstg
- -55 to +125 °C
lElectrical Characteristics (Tj= 25°C)
Parameter
Symbol
Conditions
Min. Typ. Max. Unit
Forward voltage
Reverse current
VF IF=100mA - - 0.61 V
IR
VR=40V
- - 100 mA
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
1/5
2015.09 - Rev.A

1 Page





RB541SM-40 pdf, ピン配列
RB541SM-40
lElectrical Characteristic Curves
45
Tj=25°C
40 VR=40V
n=30pcs
35
30
25
20 Ave. : 14.6mA
15
10
5
IR DISPERSION MAP
Data Sheet
30
Tj=25°C
f=1MHz
25 VR=0V
n=10pcs
20
Ave. : 15pF
15
10
Ct DISPERSION MAP
10
9
IFSM 1cyc
8
8.3ms
Ta=25°C
7
6 Ave. : 5.0A
5
4
3
2
IFSM DISPERSION MAP
35
Tj=25°C
30 IF=0.1A
IR=0.1A
25 Irr / IR=0.10
n=10pcs
20
15
10 Ave. : 6.4ns
5
0
trr DISPERSION MAP
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
3/5
2015.09 - Rev.A


3Pages


RB541SM-40 電子部品, 半導体
Datasheet
Notice
Precaution on using ROHM Products
1. Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment,
OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you
intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport
equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car
accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or
serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.
Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any
damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific
Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU CHINA
CLASS
CLASS
CLASS
CLASSb
CLASS
CLASS
2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3. Our Products are designed and manufactured for use under standard conditions and not under any special or
extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any
special or extraordinary environments or conditions. If you intend to use our Products under any special or
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of
product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
4. The Products are not subject to radiation-proof design.
5. Please verify and confirm characteristics of the final or mounted products in using the Products.
6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7. De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual
ambient temperature.
8. Confirm that operation temperature is within the specified range described in the product specification.
9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM representative in advance.
For details, please refer to ROHM Mounting specification
Notice-PGA-E
© 2015 ROHM Co., Ltd. All rights reserved.
Rev.001

6 Page



ページ 合計 : 8 ページ
 
PDF
ダウンロード
[ RB541SM-40 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
RB541SM-40

Schottky Barrier Diode

ROHM Semiconductor
ROHM Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap