DataSheet.jp

IS2025 の電気的特性と機能

IS2025のメーカーはISSCです、この部品の機能は「Bluetooth 4.1 Stereo Audio SOC」です。


製品の詳細 ( Datasheet PDF )

部品番号 IS2025
部品説明 Bluetooth 4.1 Stereo Audio SOC
メーカ ISSC
ロゴ ISSC ロゴ 




このページの下部にプレビューとIS2025ダウンロード(pdfファイル)リンクがあります。

Total 30 pages

No Preview Available !

IS2025 Datasheet, IS2025 PDF,ピン配置, 機能
IS2020/21/23/25 SoC
Bluetooth® 4.1 Stereo Audio SOC
Features
System Specification
Compliant with Bluetooth Specification v.4.1
(EDR) in 2.4 GHz ISM band
It supports following profiles :
- HFP 1.6
- HSP 1.1
- A2DP 1.2
- AVRCP 1.5
- SPP 1.0
- PBAP 1.0
Baseband Hardware
16MHz main clock input
Built-in internal ROM for program memory
Support to connect to two hosts ( phones,
tablets…) with HFP or A2DP profiles
simultaneously
Adaptive Frequency Hopping (AFH) avoids
occupied RF channels
Fast Connection supported
RF Hardware
Fully Bluetooth 4.1 (EDR) system in 2.4 GHz
ISM band.
Combined TX/RX RF terminal simplifies
external matching and reduces external
antenna switches.
Max. +4dBm output power with 20 dB level
control from register control.
Built-in T/R switch for Class 2/3 application
To avoid temperature variation, temperature
sensor with temperature calibration is utilized
into bias current and gain control.
Fully integrated synthesizer has been created.
There requires no external VCO, varactor
diode, resonator and loop filter.
Crystal oscillation with built-in digital trimming
for temperature/process variations.
Audio processor
Support 64 kb/s A-Law or -Law PCM format,
or CVSD (Continuous Variable Slope Delta
Modulation) for SCO channel operation.
Noise suppression
Echo suppression
SBC and optional AAC decoding
Packet loss concealment
Build-in four languages (Chinese/ English/
Spanish/ French) voice prompts and 20 events
for each one (This function can be set up in
IS20XXS_UItool.)
Support SCMS-T
Audio Codec
20 bit DAC and 16 bit ADC codec
98dB SNR DAC playback
Built-in 2 channel 2.3W class-D amplifier for a
4Ω speaker (for IS2025S only)
Peripherals
Built-in Lithium-ion battery charger (up to
350mA)
Integrate 3V, 1.8V configurable switching
regulator and LDO
Built-in ADC for battery monitor and voltage
sense.
A line-in port for external audio input
Two LED drivers
Flexible HCI interface
High speed HCI-UART (Universal
Asynchronous Receiver Transmitter) interface
(up to 921600bps)
Package
5x6.5mm2 48QFN package (IS2021S)
7x7mm2 56QFN package (IS2020S, IS2023S)
8x8mm2 68QFN package (IS2025S)
Description
Stereo Audio Chip is a compact, highly
integrated, CMOS single-chip RF and
baseband IC for Bluetooth v4.1 with Enhanced
Data Rate 2.4GHz applications. This chip is
fully compliant with Bluetooth specification and
completely backward-compatible with Bluetooth
3.0, 2.0 or 1.2 systems.
It incorporates Bluetooth 1M/2M/3Mbps RF,
single-cycle 8bit MCU, TX/RX modem, 5-port
memory controller, task/hopping controller,
Page 1

1 Page





IS2025 pdf, ピン配列
Stereo Audio SoC
Table of Contents
1.0 DEVICE OVERVIEW ...................................................................................................................................4
2.0 KEY FEATURES TABLE..............................................................................................................................5
3.0 PIN DESCRIPTION AND POWER SUPPLY ...............................................................................................6
4.0 TRANSCEIVER ..........................................................................................................................................19
5.0 MICROPROCESSOR ................................................................................................................................20
6.0 AUDIO ........................................................................................................................................................21
7.0 POWER MANAGEMENT UNIT..................................................................................................................23
8.0 GENERAL PURPOSE IOs .........................................................................................................................25
9.0 OPERATION WITH EXTERNAL MCU.......................................................................................................26
10.0 I2S APPLICATION ....................................................................................................................................31
11.0 ANTENNA PLACEMENT RULE ..............................................................................................................33
12.0 SPECIFICATIONS ...................................................................................................................................34
13.0 REFERENCE CIRCUIT............................................................................................................................41
14.0 PACKAGE INFORMATION......................................................................................................................46
15.0 REFLOW PROFILE AND STORAGE CINDITION...................................................................................54
Abbreviations List:
HFP: Hands-free Profile
AVRCP: Audio Video Remote Control Profile
A2DP: Advanced Audio Distribution Profile
PBAP: Phone Book Access Profile
HSP: Headset Profile
SPP: Serial Port Profile
NFC: Near Field Communication
CDA: Class D Amplifier
SCMS-T: Serial Copy Management System
Page 3


3Pages


IS2025 電子部品, 半導体
X” means no support the feature.
3.0 PIN DESCRIPTION AND POWER SUPPLY
3.1 PIN ASSIGNMENT
Stereo Audio SoC
TABLE 3-1: IS2020S PIN DESCRIPTION
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Pin type
P
I
I
I
I
P
I
I
P
O
I/O
I
P
I/O
I
Name
VCOM
MICN2
MICP2
MICN1
MICP1
MIC_BIAS
AIR
AIL
VDD_CORE
P1_2
P1_3
RST_N
VDD_IO
P0_1
P2_4
Description
Internal biasing voltage for CODEC
Mic 2 mono differential analog negative input
Mic 2 mono differential analog positive input
Mic 1 mono differential analog negative input
Mic 1 mono differential analog positive input
Electric microphone biasing voltage
R-channel single-ended analog inputs
L-channel single-ended analog inputs
Core 1.2V power input; Connect to CLDO_O pin
IO pin, default pull-high input
EEPROM clock SCL
IO pin, default pull-high input
EEPROM data SDA
System Reset Pin, active when rising edge.
I/O power supply input (2.7~3.3V); Connect to LDO31_VO pin
IO pin, default pull-high input (Note 1)
1. FWD key when class 2 RF (default), active low.
2. Class1 TX Control signal of external RF T/R switch, active high.
IO pin, default pull-high input
System Configuration,
Page 6

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ IS2025 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
IS202

(IS201 - IS204) HIGH DENSITY PHOTOTRANSISTOR OPTICALLY COUPLED ISOLATORS

ISOCOM COMPONENTS
ISOCOM COMPONENTS
IS2020

Bluetooth 4.1 Stereo Audio SOC

ISSC
ISSC
IS2021

Bluetooth 4.1 Stereo Audio SOC

ISSC
ISSC
IS2023

Bluetooth 4.1 Stereo Audio SOC

ISSC
ISSC


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap