DataSheet.jp

HCPL-J456 の電気的特性と機能

HCPL-J456のメーカーはAvagoです、この部品の機能は「Intelligent Power Module and Gate Drive Interface Optocouplers」です。


製品の詳細 ( Datasheet PDF )

部品番号 HCPL-J456
部品説明 Intelligent Power Module and Gate Drive Interface Optocouplers
メーカ Avago
ロゴ Avago ロゴ 




このページの下部にプレビューとHCPL-J456ダウンロード(pdfファイル)リンクがあります。

Total 21 pages

No Preview Available !

HCPL-J456 Datasheet, HCPL-J456 PDF,ピン配置, 機能
HCPL-4506/J456/0466, HCNW4506
Intelligent Power Module and Gate Drive Interface Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCPL-4506 and HCPL-0466 contain a GaAsP LED while
the HCPL-J456 and the HCNW4506 con­tain an AlGaAs LED.
The LED is optically coupled to an inte­grated high gain
photo detector. Minimized propagation delay difference
between devices makes these optocouplers excellent so-
lutions for improving inverter efficiency through reduced
switching dead time.
An on chip 20 kΩ output pull-up resistor can be enabled by
shorting output pins 6 and 7, thus eliminating the need for
an external pull-up resistor in common IPM applications.
Specifications and performance plots are given for typical
IPM applications.
Functional Diagram
NC 1
ANODE 2
20 k
8 VCC
7 VL
CATHODE 3
6 VO
NC 4
SHIELD
5 GND
Features
Performance specified for bommon IPM applications
over industrial temperature range: -40°C to 100°C
Fast maximum propagation delays
tPHL = 480 ns
tPLH = 550 ns
Minimized Pulse Width Distortion
PWD = 450 ns
15 kV/µs minimum common mode transient immu-
nity
at VCM = 1500 V
CTR > 44% at IF = 10 mA
Safety approval:
UL Recognized
-3750 V rms / 1 min. for HCPL-4506/0466/J456
-5000 V rms / 1 min. for HCPL-4506 Option 020
and HCNW4506
  CSA Approved
IEC/EN/DIN EN 60747-5-2 Approved
-VIORM = 560 Vpeak for HCPL-0466 Option 060
-VIORM = 630 Vpeak for HCPL-4506 Option 060
-VIORM = 891 Vpeak for HCPL-J456
-VIORM = 1414 Vpeak for HCNW4506
Truth Table
LED
VO
HOCNP L-4506 Functional DiaLgram
OFF
H
The connection of a 0.1 µF bypass capacitor
between pins 5 and 8 is recommended.
Applications
IPM isolation
Isolated IGBT/MOSFET gate drive
AC and brushless DC motor drives
Industrial inverters
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.

1 Page





HCPL-J456 pdf, ピン配列
Ordering Information
HCPL-0466, HCPL-4506 and HCPL-J456 are UL Recognized with 3750 Vrms for 1 minute per UL1577.
HCNW4506 is UL Recognized with 5000 Vrms for 1 minute per UL1577. HCPL-0466, HCPL-4506, HCPL-J456 and
HCNW4506 are approved under CSA Component Acceptance Notice #5, File CA 88324.
   Option
Part RoHS non RoHS
Number Compliant Compliant Package
Surface Gull Tape UL 5000 Vrms/ IEC/EN/DIN
Mount Wing & Reel 1 Minute rating EN 60747-5-2
-000E
no option 300 mil DIP-8
-300E
#300
X X
-500E
#500
X X X
-020E
#020
X
HCPL-4506 -320E
#320
X X X
-520E
#520
X X X X
-060E
#060
X
-360E
#360
X X
X
-560E
#560
X X X
X
-000E
no option 300 mil DIP-8
X
HCPL-J456 -300E
#300
X X
X
-500E
#500
X X X
X
-000E
no option SO-8
X
HCPL-0466 -500E
#500
X
X
-060E
#060
X
X
-560E
#560
X
X
X
-000E
no option 400 mil
X
X
HCNW4506 -300E
#300
Widebody X
X
X
X
-500E
#500
DIP-8
X X X X
X
Quantity
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
100 per tube
1500 per reel
100 per tube
1500 per reel
42 per tube
42 per tube
750 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCPL-4506-560E to order product of 300 mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with
IEC/EN/DIN EN 60747-5-2 Safety Approval and RoHS compliant.
Example 2:
HCPL-4506 to order product of 300 mil DIP package in Tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since July 15, 2001 and
RoHS compliant will use ‘–XXXE.’



3Pages


HCPL-J456 電子部品, 半導体
HCPL-0466 Outline Drawing (8-Pin Small Outline Package)
LAND PATTERN RECOMMENDATION
8
3.937 ± 0.127
(0.155 ± 0.005)
PIN ONE 1
0.406 ± 0.076
(0.016 ± 0.003)
765
XXX
YWW
234
5.994 ± 0.203
(0.236 ± 0.008)
TYPE NUMBER
(LAST 3 DIGITS)
DATE CODE
1.270
(0.050)
BSC
7.49 (0.295)
1.9 (0.075)
0.64 (0.025)
* 5.080 ± 0.127
(0.200 ± 0.005)
45°
X
0.432
(0.017)
3.175 ± 0.127
(0.125 ± 0.005)
1.524
(0.060)
0 ~ 7°
0.228 ± 0.025
(0.009 ± 0.001)
* TOTAL PACKAGE LENGTH (INCLUSIVE OF MOLD FLASH)
5.207 ± 0.254 (0.205 ± 0.010)
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES) MAX.
0.203 ± 0.102
(0.008 ± 0.004)
0.305
(0.012)
MIN.
NOTE: FLOATING LEAD PROTRUSION IS 0.15 mm (6 mils) MAX.
HCNW4506 Outline Drawing (8-Pin Widebody Package)
11.15 ± 0.15
(0.442 ± 0.006)
87
65
A
HCNWXXXX
YYWW
1234
TYPE NUMBER
DATE CODE
1.55
(0.061)
MAX.
11.00
(0.433)
MAX.
9.00 ± 0.15
(0.354 ± 0.006)
10.16 (0.400)
TYP.
7° TYP.
(05..21001)MAX.
0.254
+ 0.076
- 0.0051
(0.010+-
0.003)
0.002)
2.54 (0.100)
TYP.
1.78 ± 0.15
(0.070 ± 0.006)
3.10 (0.122)
3.90 (0.154)
0.51 (0.021) MIN.
0.40 (0.016)
0.56 (0.022)
DIMENSIONS IN MILLIMETERS (INCHES).
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.


6 Page



ページ 合計 : 21 ページ
 
PDF
ダウンロード
[ HCPL-J456 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HCPL-J454

High CMR / High Speed Optocouplers

Hewlett-Packard
Hewlett-Packard
HCPL-J454

High Speed Optocouplers

AVAGO
AVAGO
HCPL-J456

Intelligent Power Module and Gate Drive Interface Optocouplers

Avago
Avago


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap