|
|
Número de pieza | NCV7751 | |
Descripción | Twelve Low-Side Relay Drivers | |
Fabricantes | ON Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de NCV7751 (archivo pdf) en la parte inferior de esta página. Total 25 Páginas | ||
No Preview Available ! NCV7751
Twelve Low-Side Relay
Drivers
The NCV7751 is an automotive grade twelve channel low−side
driver providing drive capability up to 600 mA per channel. Output
control is via a SPI communication and offers convenient reporting of
faults for open load (or short to ground), over load, and over
temperature conditions. Additionally, all the drivers have integrated
output clamps for inductive loads.
The NCV7751 is available in a SSOP−24 exposed pad package for
optimal thermal performance.
Features
• 12 Channels
• 600 mA Low−Side Drivers
♦ RDS(on) 1.3 W (typ), 2.5 W (max)
• Configurable SPI Control (16/24/32 Bit)
♦ Compatible with NCV7240
♦ Frame Error Detection
♦ Daisy Chain Capable
• Power Up Without Open Circuit Detection Active (for LED
applications)
• Low Quiescent Current in Sleep and Standby Modes
• 3.3 V and 5 V compatible Digital Input Supply Range
• Fault Reporting
♦ Open Load Detection (Selectable)
♦ Over Load
♦ Over Temperature
• Power−on Reset (VDD, VDDA)
• SSOP−24 with an Exposed Pad
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These are Pb−Free Devices
Applications
• Automotive Body Control Unit
• Automotive Engine Control Unit
• Relay Drive
• LED Drive
• Stepper Motor
http://onsemi.com
SSOP24 NB EP
CASE 940AK
MARKING DIAGRAM
NCV7751G
AWLYYWW
NCV7751 = Specific Device Code
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping†
NCV7751DQR2G SSOP24−EP
2500 /
(Pb−Free) Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2013
November, 2013 − Rev. 0
1
Publication Order Number:
NCV7751/D
1 page NCV7751
ELECTRICAL CHARACTERISTICS (3.0 V < VDD < VDDA, 4.5 V < VDDA (Note 3) < 5.5 V, −40°C v TJ v 150°C, EN = VDD
unless otherwise specified).
Characteristic
Conditions
Symbol
Min Typ Max Unit
GENERAL
Operating Current (VDDA)
ON Mode
(All Channels On)
− 3 5 mA
IopVDDA
Quiescent Current (VDDA)
Global Standby Mode
(All Channels Off)
Quiescent Current (VDDA)
Low Iq Mode
Operating Current (VDD)
ON Mode
(All Channels On)
SI = SCLK = 0 V, CSB1 = CSB2 = VDD
−40°C ≤ TJ ≤ 125°C
TJ = 150°C
SI = SCLK = EN = 0 V, CSB1 = CSB2 = VDD
−40°C ≤ TJ ≤ 125°C
TJ = 150°C
EN = high, SCLK = 0 V,
CSB1 = CSB2 = VDD = VDDA
IstbyVDDA125
IstbyVDDA150
IqVDDA125
IqVDDA150
IopVDD
−
−
−
−
−
mA
− 32
− 40
mA
− 10
− 20
0.3 0.5 mA
Quiescent Current (VDD)
Global Standby Mode
(All Channels Off)
Quiescent Current (VDD)
Low Iq Mode
CSB1 = CSB2 = VDD = VDDA, fSCLK = 0 Hz
−40°C ≤ TJ ≤ 125°C
TJ = 150°C
EN = 0 V
−40°C ≤ TJ ≤ 125°C
TJ = 150°C
IstbyVDD125
IstbyVDD150
IqVDD125
IqVDD150
−
−
−
−
mA
− 20
− 40
mA
−
−
5
20
Total Quiescent Current
VDD + VDDA + OUTx
TJ = 125°C
OUTx = 18 V
EN = LHI = SCLK = SI = 0
VDDA = VDD = CSB1 = CSB2 = 5 V
Iqtot125
− − 10 mA
Power−on Reset
threshold (VDDA)
VDDA rising
VDD = 3 V
VDDApor
− 3.8 4.5 V
Power−on Reset
Hysteresis (VDDA)
VDDAhys
− 250 − mV
Power−on Reset
threshold (VDD)
VDD rising
VDDpor
− 2.4 2.7 V
Power−on Reset
Hysteresis (VDD)
VDDAhys
− 165 − mV
Thermal Shutdown
(Note 4)
Not ATE tested.
Tsd
150 175 200
°C
Thermal Hysteresis
OUTPUT DRIVER
Not ATE tested.
TsHy
10 25 − °C
Output Transistor RDS(on)
Overload Detection
Current
IOUTx = 180 mA
RDS(on)LS
Isd
− 1.3 2.5
0.6 0.95 1.3
W
A
Output Leakage
Output Clamp Voltage
OUTx = 13.5 V, 25°C
OUTx = 13.5 V
VDD = 0 V to 5.5 V
VDDA = 0 V to 5.5 V
IOUTx = 180 mA
IsnkLkg25
IsnkLkg
Vclmp
− − 1 mA
−−5
36 40 44
V
Output Body Diode Voltage
Open Load Detection
Threshold Voltage
IOUTx = −180 mA
VbdFwd
Vol
− − 1.5
1.0 1.75 2.5
V
V
Open Load Diagnostic
Sink Current
1 V < OUTx < 13.5 V, Output Disabled
Iol 20 60 100 mA
3. Reduced performance down to 4 V provided VDDA is not in Power−On Reset.
4. Each output driver is protected by its’ own individual thermal sensor.
5. Input signals H→L→H greater than 50usec are guaranteed to be detected.
http://onsemi.com
5
5 Page NCV7751
TYPICAL PERFORMANCE GRAPHS
2.5
2.0
1.5
1.0
VDDA = 4.5 V, VDD = 3 V
0.5
0
−40 −20 0 20 40 60 80 100 120 140
TEMPERATURE (°C)
Figure 17. Open Load Detection Voltage vs.
Temperature
http://onsemi.com
11
11 Page |
Páginas | Total 25 Páginas | |
PDF Descargar | [ Datasheet NCV7751.PDF ] |
Número de pieza | Descripción | Fabricantes |
NCV7751 | Twelve Low-Side Relay Drivers | ON Semiconductor |
NCV7751DQR2G | Twelve Low-Side Relay Drivers | ON Semiconductor |
NCV7754 | Octal Low-Side Relay Driver | ON Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |