DataSheet.jp

MB91F577CS の電気的特性と機能

MB91F577CSのメーカーはSpansionです、この部品の機能は「32-bit Microcontroller」です。


製品の詳細 ( Datasheet PDF )

部品番号 MB91F577CS
部品説明 32-bit Microcontroller
メーカ Spansion
ロゴ Spansion ロゴ 




このページの下部にプレビューとMB91F577CSダウンロード(pdfファイル)リンクがあります。
Total 30 pages

No Preview Available !

MB91F577CS Datasheet, MB91F577CS PDF,ピン配置, 機能
MB91570 Series
32-bit Microcontroller
MB91F575B/F575BS/F575BH/F575BHS/F575C/
F575CS/F575CH/F575CHS
MB91F577B/F577BS/F577BH/F577BHS/F577CS/
F577CH/F577CHS
MB91F578C(M)/F578CS(M)/F578CH(M)/F578CHS(M)
MB91F579C(M)/F579CS(M)/F579CH(M)/F579CHS(M)
Data Sheet (Full Production)
Publication Number MB91F577_DS705-00009 Revision 3.0 Issue Date June 19, 2015

1 Page





MB91F577CS pdf, ピン配列
MB91570 Series
32-bit Microcontroller
MB91F575B/F575BS/F575BH/F575BHS/F575C/
F575CS/F575CH/F575CHS
MB91F577B/F577BS/F577BH/F577BHS/F577CS/
F577CH/F577CHS
MB91F578C(M)/F578CS(M)/F578CH(M)/F578CHS(M)
MB91F579C(M)/F579CS(M)/F579CH(M)/F579CHS(M)
Data Sheet (Full Production)
DESCRIPTION
This series is Spansion 32-bit microcontroller designed for automotive and industrial control applications. It
contains the FR81S CPU that is compatible with the FR family. The FR81S has a high level performance
among the Spansion FR family by enhancing CPU instruction pipeline and load store processing, and
improving internal bus transfer.
It is best suited for application control for automotive.
Note: FR is a line of products of Spansion Inc.
Spansion provides information facilitating product development via the following website.
The website contains information useful for customers.
http://www.spansion.com/Support/microcontrollers/
Publication Number MB91F577_DS705-00009 Revision 3.0 Issue Date June 19, 2015
This document states the current technical specifications regarding the Spansion product(s) described herein. Spansion Inc. deems the products to have been in sufficient
production volume such that subsequent versions of this document are not expected to change. However, typographical or specification corrections, or modifications to the
valid combinations offered may occur.


3Pages


MB91F577CS 電子部品, 半導体
DataSheet
Built-in dedicated baud rate generator
The external clock can be adjusted by the reload counter
DMA transfer support
< I2C >
Full-duplex double buffering system, 16-byte transmission FIFO memory, 16-byte reception FIFO
memory
Standard mode ( Max. 100kbps ) / high-speed mode ( Max. 400kbps ) supported
DMA transfer supported ( for transmission only )
I2C supporting I/O ( for ch.0 and ch.1 only )
CAN Controller (C-CAN) : 3 channels
Transfer speed : Up to 1Mbps
64-transmission/reception message buffering : 1 channel,
32-transmission/reception message buffering : 2 channels
PPG : 16-bit × 24 channels
Reload timer : 16-bit × 7 channels(3 channels are for regular timer interrupt generation. )
Free-run timer :
32-bit × 6 channels (Can select each channel for input capture, output compare)
Input capture :
32-bit × 12 channels (linked to the free-run timer)
Output compare : 32-bit × 12 channels (linked to the free-run timer)
Sound generator : 5 channels
Frequency and amplitude sequencers provided
Stepping motor controller : 6 channels
8/10-bit PWM
High current output supported (4 lines × 6 channels)
Can refer back electromotive force using pin-shared A/D converter
LCD controller
Common output : 4 , Segment output : 32
Duty drive (SEG0 to SEG31) and static drive (ST0 to ST8) can be switched.
Each of COM0 to COM3, SEG0 to SEG31, V0, V1, V2, and V3 pins for duty drive can be switched
to the general-purpose port. (The SEG23 to SEG31 pins can be switched to static driving.)
V0, V1, V2 and V3 pin can be used as the general-purpose port. But V3 pin cannot be used as an
output pin.
Each of ST0 to ST8 pins for static drive can be switched to the general-purpose port, or it can be
switched to the segment output of duty drive.
MB91F575/7: The amplitude of the SEG0 to SEG22 output is determined by the VCC5 power
supply pin or by the V3 pin even if VCCE pin is supplied to 3.3V.
MB91F578/9: The voltage VCCE or less can be supplied to V3 pin. It is prohibited that VCC5
being chosen as LCDC reference voltage by software.
Up/Down counter: 2 channels
8/16-bit up/down counter
Real-time clock (RTC) (for day, hours, minutes, seconds)
Main oscillation / sub oscillation frequency can be selected for the operation clock
Calibration: A hardware watchdog of the CR oscillation drive and real-time clock (RTC) of the sub clock
drive
The CR oscillation frequency can be trimmed
The main clock to sub clock ratio can be corrected by setting the real-time clock prescaler
Clock Supervisor
Monitoring abnormality (damage of crystal etc.) of sub oscillation ( 32kHz ) (dual clock products)
and main oscillation ( 4 MHz )
When abnormality is detected, it switches to the CR clock.
Base timer : 2 channels
16-bit timer
Any of four PWM/PPG/PWC/reload timer functions can be selected and used.
As for the functions of PWC and reload timer, 2 channels of cascade mode can be used as 32-bit
timer.
CRC generation
4 MB91F577_DS705-00009-3v0-E, June 19, 2015

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ MB91F577CS データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
MB91F577CH

32-bit Microcontroller

Spansion
Spansion
MB91F577CHS

32-bit Microcontroller

Spansion
Spansion
MB91F577CS

32-bit Microcontroller

Spansion
Spansion


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap