DataSheet.es    


PDF AUIRLL2705 Data sheet ( Hoja de datos )

Número de pieza AUIRLL2705
Descripción Power MOSFET ( Transistor )
Fabricantes International Rectifier 
Logotipo International Rectifier Logotipo



Hay una vista previa y un enlace de descarga de AUIRLL2705 (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! AUIRLL2705 Hoja de datos, Descripción, Manual

AUTOMOTIVE GRADE
AUIRLL2705
Features
l Advanced Planar Technology
l Low On-Resistance
l Logic Level Gate Drive
l Dynamic dv/dt Rating
l 150°C Operating Temperature
l Fast Switching
l Fully Avalanche Rated
l Repetitive Avalanche Allowed up to
Tjmax
l Lead-Free, RoHS Compliant
l Automotive Qualified*
G
Description
Specifically designed for Automotive applications, this
cellular design of HEXFET® Power MOSFETs utilizes
the latest processing techniques to achieve low on-
resistance per silicon area. This benefit combined
with the fast switching speed and ruggedized device
design that HEXFET power MOSFETs are well known
for, provides the designer with an extremely efficient
and reliable device for use in Automotive and a wide
variety of other applications.
HEXFET® Power MOSFET
D V(BR)DSS
55V
RDS(on) max. 0.04Ω
S ID
3.8A
G
Gate
D
S
D
G
SOT-223
AUIRLL2705
D
Drain
S
Source
Base Part Number
AUIRLL2705
Package Type
SOT-223
Standard Pack
Form
Quantity
Tube
95
Tape and Reel
2500
Orderable Part Number
AUIRLL2705
AUIRLL2705TR
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These
are stress ratings only; and functional operation of the device at these or any other condition beyond those indicated in the
specifications is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device
reliability. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions.
Ambient temperature (TA) is 25°C, unless otherwise specified.
Parameter
Max.
Units
ID @ TA = 25°C
ID @ TA = 25°C
ID @ TA = 70°C
IDM
PD @TA = 25°C
PD @TA = 25°C
hContinuous Drain Current, VGS @ 10V
gContinuous Drain Current, VGS @ 10V
gContinuous Drain Current, VGS @ 10V
™Pulsed Drain Current
hPower Dissipation (PCB Mount)
gPower Dissipation (PCB Mount)
gLinear Derating Factor (PCB Mount)
5.2
3.8
3.0 A
30
2.1
W
1.0
8.3 mW/°C
VGS
EAS
IAR
EAR
dv/dt
Gate-to-Source Voltage
dSingle Pulse Avalanche Energy (Thermally Limited)
ÙAvalanche Current
™gRepetitive Avalanche Energy
ePeak Diode Recovery dv/dt
± 16
110
3.8
0.10
7.5
V
mJ
A
mJ
V/ns
TJ Operating Junction and
TSTG
Storage Temperature Range
Thermal Resistance
-55 to + 150
°C
Parameter
Typ.
Max.
Units
gRθJA Junction-to-Ambient (PCB mount, steady state)
93
hRθJA Junction-to-Ambient (PCB mount, steady state)
48
120 °C/W
60
HEXFET® is a registered trademark of International Rectifier.
*Qualification standards can be found at http://www.irf.com/
1
www.irf.com © 2014 International Rectifier
Submit Datasheet Feedback
March 26, 2014

1 page




AUIRLL2705 pdf
AUIRLL2705
10V QGS
VG
QG
QGD
Charge
Fig 9a. Basic Gate Charge Waveform
Current Regulator
Same Type as D.U.T.
50KΩ
12V .2μF
.3μF
D.U.T.
+
-VDS
VGS
3mA
IG ID
Current Sampling Resistors
Fig 9b. Gate Charge Test Circuit
VDS
VGS
RG
RD
D.U.T.
10V
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
+
-
VDD
Fig 10a. Switching Time Test Circuit
VDS
90%
10%
VGS
td(on) tr
td(off) tf
Fig 10b. Switching Time Waveforms
1000
100
D = 0.50
0.20
10 0.10
0.05
0.02
1 0.01
0.1
SINGLE PULSE
(THERMAL RESPONSE)
0.01
0.00001
0.0001
0.001
PDM
t1
t2
Notes:
1. Duty factor D = t1 / t 2
2. Peak TJ = PDM x Z thJA + TA
0.01
0.1
1
10 100 1000
t1 , Rectangular Pulse Duration (sec)
A
10000
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient
5 www.irf.com © 2014 International Rectifier Submit Datasheet Feedback
March 26, 2014

5 Page





AUIRLL2705 arduino
AUIRLL2705
IMPORTANT NOTICE
Unless specifically designated for the automotive market, International Rectifier Corporation and its subsid-
iaries (IR) reserve the right to make corrections, modifications, enhancements, improvements, and other
changes to its products and services at any time and to discontinue any product or services without notice.
Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific
requirements with regards to product discontinuance and process change notification. All products are sold
subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with IR’s standard warranty. Testing and other quality control techniques are used to the extent
IR deems necessary to support this warranty. Except where mandated by government requirements, testing
of all parameters of each product is not necessarily performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible
for their products and applications using IR components. To minimize the risks with customer products and
applications, customers should provide adequate design and operating safeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable
for such altered documentation. Information of third parties may be subject to additional restrictions.
Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for
that product or service voids all express and any implied warranties for the associated IR product or service
and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical
implant into the body, or in other applications intended to support or sustain life, or in any other application
in which the failure of the IR product could create a situation where personal injury or death may occur. Should
Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify
and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even
if such claim alleges that IR was negligent regarding the design or manufacture of the product.
Only products certified as military grade by the Defense Logistics Agency (DLA) of the US Department of
Defense, are designed and manufactured to meet DLA military specifications required by certain military,
aerospace or other applications. Buyers acknowledge and agree that any use of IR products not certified by
DLA as military-grade, in applications requiring military grade products, is solely at the Buyer’s own risk and
that they are solely responsible for compliance with all legal and regulatory requirements in connection with
such use.
IR products are neither designed nor intended for use in automotive applications or environments unless the
specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part
number including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, IR will not be responsible for any failure to meet such requirements.
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
101 N. Sepulveda Blvd., El Segundo, California 90245
Tel: (310) 252-7105
11
www.irf.com © 2014 International Rectifier
Submit Datasheet Feedback
March 26, 2014

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet AUIRLL2705.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
AUIRLL2705Power MOSFET ( Transistor )Infineon
Infineon
AUIRLL2705Power MOSFET ( Transistor )International Rectifier
International Rectifier

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar